X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9xeek_dataflash_cs1_defconfig;h=c07008a9df23d70e25caecdbf153c4e0c3c63be8;hb=5edb9b2d713736d82e6529ecf04d8a44227944b5;hp=cf734a5063e662307308066fc9734c58b8ddeae3;hpb=5619295995e3262bb5770e8b5e945ffdc5442145;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig
index cf734a5063..c07008a9df 100644
--- a/configs/at91sam9xeek_dataflash_cs1_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs1_defconfig
@@ -1,11 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x21f00000
 CONFIG_TARGET_AT91SAM9260EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -14,8 +17,6 @@ CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
@@ -26,12 +27,18 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=15000000
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -42,12 +49,11 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xfffff200
-CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y