X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9rlek_dataflash_defconfig;h=800a92cf818652b10829ad5038c9b9d99346ec6e;hb=40e44c8bf516e7071c9b80113473be5757e8c3f3;hp=e78ec06d16da27185cd23b6d6e484ab46247ea59;hpb=2ee87b0c1a5439e4ad6467cb8d5e8fb58922ca4b;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig
index e78ec06d16..800a92cf81 100644
--- a/configs/at91sam9rlek_dataflash_defconfig
+++ b/configs/at91sam9rlek_dataflash_defconfig
@@ -1,9 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x21F00000
 CONFIG_TARGET_AT91SAM9RLEK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -16,26 +20,26 @@ CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+# CONFIG_NET is not set
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_AT91_UTMI=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -44,13 +48,10 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xfffff200
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_LCD=y