X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9n12ek_mmc_defconfig;h=d83fa92300318776bf94a02f5cef7f7c8c1abd9a;hb=88718be3001055fa2801a44ab10570279b3f2cb7;hp=0062e0cade1f59e87b5d762d634eecdaf548834c;hpb=b25f8e2112b1582ce6386e846800a31bab688e50;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig
index 0062e0cade..d83fa92300 100644
--- a/configs/at91sam9n12ek_mmc_defconfig
+++ b/configs/at91sam9n12ek_mmc_defconfig
@@ -3,7 +3,11 @@ CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
+CONFIG_ENV_SIZE=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -17,7 +21,6 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -27,7 +30,9 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs)"
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_ENV_IS_IN_FAT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
@@ -35,16 +40,16 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD_RAW_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xfffff200
-CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y