X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9g20ek_2mmc_defconfig;h=39863b8904e85391147ad3d578dc111dbe0cd7a1;hb=4ff63383e3497389e66cf70943a83bdb1810462a;hp=abc766113fc0daa6368350d82f846e1b4bc28f7e;hpb=b4ee6daad7a2604ca9466b2ba48de86cc27d381f;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig
index abc766113f..39863b8904 100644
--- a/configs/at91sam9g20ek_2mmc_defconfig
+++ b/configs/at91sam9g20ek_2mmc_defconfig
@@ -1,8 +1,12 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x21f00000
 CONFIG_TARGET_AT91SAM9260EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x2000
+CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
@@ -20,7 +24,6 @@ CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
@@ -30,17 +33,18 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek_2mmc"
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
-CONFIG_NAND=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y
@@ -48,7 +52,6 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y