X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9263ek_dataflash_cs0_defconfig;h=c26a128a64b5c95ab4d7bd8e723826ca484717a7;hb=cf35ea1011861051731557f4ba00e0ff8ba9198d;hp=bc2f24226ab30294b648d92572451382343875ed;hpb=002e91087c817f8281fccee327e0d8e98c691a2f;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig
index bc2f24226a..c26a128a64 100644
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@@ -1,8 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x21F00000
 CONFIG_TARGET_AT91SAM9263EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_ENV_SIZE=0x4200
+CONFIG_ENV_OFFSET=0x4200
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
 CONFIG_BOOTDELAY=3
@@ -16,7 +22,6 @@ CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -28,7 +33,11 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=15000000
+CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
@@ -36,6 +45,8 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -46,13 +57,10 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xffffee00
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y