X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9261ek_dataflash_cs3_defconfig;h=7e4e4932cf9a4b7885b668e740a1254f50022557;hb=a52f1fe4081a485254850cc2944e8e7dfbc3f66c;hp=9cbf76710760c24a9904c591fe0883c3e2d6bb59;hpb=6aee2ab68c362ace5a59f89a63abed82e0bf19e5;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig
index 9cbf767107..7e4e4932cf 100644
--- a/configs/at91sam9261ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs3_defconfig
@@ -1,8 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x21f00000
 CONFIG_TARGET_AT91SAM9261EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_ENV_SIZE=0x4200
+CONFIG_ENV_OFFSET=0x4200
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3"
 CONFIG_BOOTDELAY=3
@@ -14,8 +20,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
@@ -26,13 +30,19 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=15000000
+CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -41,13 +51,10 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xfffff200
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y