X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fat91sam9260ek_dataflash_cs1_defconfig;h=eaa18f67e47a2e7f59207c66e42890b78d622f72;hb=d80dd9e7853256f27847238771bf34c7157b8894;hp=254d1591858a8b3a8662ad4a747d14db25833193;hpb=e7db856bf96213ba3f6b716be9fa264e184f74e2;p=oweals%2Fu-boot.git

diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig
index 254d159185..eaa18f67e4 100644
--- a/configs/at91sam9260ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs1_defconfig
@@ -1,12 +1,17 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x21f00000
 CONFIG_TARGET_AT91SAM9260EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x4200
+CONFIG_ENV_OFFSET=0x4200
+CONFIG_ENV_SECT_SIZE=0x210
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1"
 CONFIG_BOOTDELAY=3
@@ -19,7 +24,6 @@ CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
@@ -27,17 +31,21 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=15000000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
-CONFIG_NAND=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y
@@ -45,7 +53,6 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y