X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=config;h=429574b11e4606333b17a15d1b7b1de78a595ef7;hb=b5524a3ac3b19d9a689002f46646395cf9800843;hp=3c779c5b3944de6dbdfeca8371abd8010c257a63;hpb=7228920ca8c0eca5b11cea9c5ba6b743883356dc;p=oweals%2Fopenssl.git

diff --git a/config b/config
index 3c779c5b39..429574b11e 100755
--- a/config
+++ b/config
@@ -71,6 +71,10 @@ fi
 # Now we simply scan though... In most cases, the SYSTEM info is enough
 #
 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
+    MPE/iX:*)
+	MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
+	echo "parisc-hp-MPE/iX"; exit 0
+	;;
     A/UX:*)
 	echo "m68k-apple-aux3"; exit 0
 	;;
@@ -164,7 +168,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
         ;;
 
     NetBSD:*:*:*386*)
-        echo "`/usr/sbin/sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
+        echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
 
     NetBSD:*)
@@ -199,6 +203,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "ppc-apple-rhapsody"; exit 0
 	;;
 
+    Darwin:*)
+	echo "ppc-apple-darwin"; exit 0
+	;;
+
     SunOS:5.*)
 	echo "${MACHINE}-whatever-solaris2"; exit 0
 	;;
@@ -247,6 +255,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
 	;;
 
+    NEWS-OS:4.*)
+	echo "mips-sony-newsos4"; exit 0;
+	;;
+
 esac
 
 #
@@ -405,11 +417,27 @@ case "$GUESSOS" in
 	    esac
 	fi
 	;;
-  mips-*-linux?) OUT="linux-mips" ;;
+  mips-*-linux?)
+          cat >dummy.c <<EOF
+#include <stdio.h>  /* for printf() prototype */
+        int main (argc, argv) int argc; char *argv[]; {
+#ifdef __MIPSEB__
+  printf ("linux-%s\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("linux-%sel\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
+	rm dummy dummy.c
+	;;
   ppc-*-linux2) OUT="linux-ppc" ;;
   m68k-*-linux*) OUT="linux-m68k" ;;
   ia64-*-linux?) OUT="linux-ia64" ;;
   ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
+  ppc-apple-darwin) OUT="darwin-ppc-cc" ;;
   sparc64-*-linux2)
 	#Before we can uncomment following lines we have to wait at least
 	#till 64-bit glibc for SPARC is operational:-(
@@ -419,7 +447,7 @@ case "$GUESSOS" in
 	#read waste < /dev/tty
 	OUT="linux-sparcv9" ;;
   sparc-*-linux2)
-	KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
 	case ${KARCH:-sun4} in
 	sun4u*)	OUT="linux-sparcv9" ;;
 	sun4m)	OUT="linux-sparcv8" ;;
@@ -470,14 +498,21 @@ case "$GUESSOS" in
   # these are all covered by the catchall below
   # *-aix) OUT="aix-$CC" ;;
   # *-dgux) OUT="dgux" ;;
+  mips-sony-newsos4) OUT="newsos4-gcc" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
+# NB: This atalla support has been superceded by the ENGINE support
+# That contains its own header and definitions anyway. Support can
+# be enabled or disabled on any supported platform without external
+# headers, eg. by adding the "hw-atalla" switch to ./config or
+# perl Configure
+#
 # See whether we can compile Atalla support
-if [ -f /usr/include/atasi.h ]
-then
-  options="$options -DATALLA"
-fi
+#if [ -f /usr/include/atasi.h ]
+#then
+#  options="$options -DATALLA"
+#fi
 
 # gcc < 2.8 does not support -mcpu=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
@@ -506,6 +541,27 @@ do
   fi
 done
 
+# Discover Kerberos 5 (since it's still a prototype, we don't
+# do any guesses yet, that's why this section is commented away.
+#if [ -d /usr/kerberos ]; then
+#    krb5_dir=/usr/kerberos
+#    if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
+#	-a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
+#	-a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
+#	-a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
+#	-a \( -f $krb5_dir/include/krb5.h \) ]; then
+#	options="$options --with-krb5-flavor=MIT"
+#    fi
+#elif [ -d /usr/heimdal ]; then
+#    krb5_dir=/usr/heimdal
+#    if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
+#	-a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
+#	-a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
+#	-a \( -f $krb5_dir/include/krb5.h \) ]; then
+#	options="$options --with-krb5-flavor=Heimdal"
+#    fi
+#fi
+
 if [ -z "$OUT" ]; then
   OUT="$CC"
 fi
@@ -548,7 +604,7 @@ OUT="$PREFIX$OUT"
 
 $PERL ./Configure LIST | grep "$OUT" > /dev/null
 if [ $? = "0" ]; then
-  #echo Configuring for $OUT
+  echo Configuring for $OUT
 
   if [ "$TEST" = "true" ]; then
     echo $PERL ./Configure $OUT $options