X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cmd%2Feeprom.c;h=792415ef93b6848b7348611de7da436624127e76;hb=41fd506842c2d9385d940cffe8ceeb8456c29fc5;hp=e88cb131a16d0bf08017ea1d3a36df724f696541;hpb=9649c5343fb1e105109f8aac499134dd4bd723ca;p=oweals%2Fu-boot.git

diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index e88cb131a1..792415ef93 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -22,6 +22,7 @@
 #include <common.h>
 #include <config.h>
 #include <command.h>
+#include <eeprom.h>
 #include <i2c.h>
 #include <eeprom_layout.h>
 
@@ -59,6 +60,10 @@
 #endif
 #endif
 
+#if defined(CONFIG_DM_I2C)
+static int eeprom_i2c_bus;
+#endif
+
 __weak int eeprom_write_enable(unsigned dev_addr, int state)
 {
 	return 0;
@@ -66,13 +71,10 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state)
 
 void eeprom_init(int bus)
 {
-	/* SPI EEPROM */
-#if defined(CONFIG_MPC8XX_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-	spi_init_f();
-#endif
-
 	/* I2C EEPROM */
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_DM_I2C)
+	eeprom_i2c_bus = bus;
+#elif defined(CONFIG_SYS_I2C)
 	if (bus >= 0)
 		i2c_set_bus_num(bus);
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -107,7 +109,7 @@ static int eeprom_len(unsigned offset, unsigned end)
 
 	/*
 	 * For a FRAM device there is no limit on the number of the
-	 * bytes that can be ccessed with the single read or write
+	 * bytes that can be accessed with the single read or write
 	 * operation.
 	 */
 #if !defined(CONFIG_SYS_I2C_FRAM)
@@ -129,22 +131,14 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
 {
 	int ret = 0;
 
-	/* SPI */
-#if defined(CONFIG_MPC8XX_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-	if (read)
-		spi_read(addr, alen, buffer, len);
-	else
-		spi_write(addr, alen, buffer, len);
-#else	/* I2C */
-
-#if defined(CONFIG_DM_I2C) && defined(CONFIG_SYS_I2C_EEPROM_BUS)
+#if defined(CONFIG_DM_I2C)
 	struct udevice *dev;
 
-	ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_EEPROM_BUS, addr[0],
+	ret = i2c_get_chip_for_busnum(eeprom_i2c_bus, addr[0],
 				      alen - 1, &dev);
 	if (ret) {
 		printf("%s: Cannot find udev for a bus %d\n", __func__,
-		       CONFIG_SYS_I2C_EEPROM_BUS);
+		       eeprom_i2c_bus);
 		return CMD_RET_FAILURE;
 	}
 
@@ -154,16 +148,12 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
 		ret = dm_i2c_write(dev, offset, buffer, len);
 
 #else /* Non DM I2C support - will be removed */
-#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
-	i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
-#endif
 
 	if (read)
 		ret = i2c_read(addr[0], offset, alen - 1, buffer, len);
 	else
 		ret = i2c_write(addr[0], offset, alen - 1, buffer, len);
-#endif
-#endif /* CONFIG_DM_I2C && CONFIG_SYS_I2C_EEPROM_BUS */
+#endif /* CONFIG_DM_I2C */
 	if (ret)
 		ret = CMD_RET_FAILURE;
 
@@ -178,6 +168,10 @@ static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
 	int rcode = 0;
 	uchar addr[3];
 
+#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
+	eeprom_init(CONFIG_SYS_I2C_EEPROM_BUS);
+#endif
+
 	while (offset < end) {
 		alen = eeprom_addr(dev_addr, offset, addr);
 
@@ -314,7 +308,7 @@ static int eeprom_execute_command(enum eeprom_action action, int i2c_bus,
 {
 	int rcode = 0;
 	const char *const fmt =
-		"\nEEPROM @0x%lX %s: addr %08lx  off %04lx  count %ld ... ";
+		"\nEEPROM @0x%lX %s: addr 0x%08lx  off 0x%04lx  count %ld ... ";
 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 	struct eeprom_layout layout;
 #endif