X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cmd%2FKconfig;h=f9be1988f655c22f14bc2ffccdc7eec54a256ea9;hb=2fa581ba910368d0f7f995fb906d6c5e4218b594;hp=6e1efaaf85d76b600c51093819861a4189bae9f1;hpb=75dd53055a33f5bdb8ee2f53ce76c67052dfca7e;p=oweals%2Fu-boot.git

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 6e1efaaf85..f9be1988f6 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -190,6 +190,20 @@ comment "Commands"
 
 menu "Info commands"
 
+config CMD_ACPI
+	bool "acpi"
+	default y if ACPIGEN
+	help
+	  List and dump ACPI tables. ACPI (Advanced Configuration and Power
+	  Interface) is used mostly on x86 for providing information to the
+	  Operating System about devices in the system. The tables are set up
+	  by the firmware, typically U-Boot but possibly an earlier firmware
+	  module, if U-Boot is chain-loaded from something else. ACPI tables
+	  can also include code, to perform hardware-specific tasks required
+	  by the Operating Systems. This allows some amount of separation
+	  between the firmware and OS, and is particularly useful when you
+	  want to make hardware changes without the OS needing to be adjusted.
+
 config CMD_BDI
 	bool "bdinfo"
 	default y
@@ -386,9 +400,20 @@ config CMD_ADTIMG
 	  files should be merged in one dtb further, which needs to be passed to
 	  the kernel, as part of a boot process.
 
+config CMD_ABOOTIMG
+	bool "abootimg"
+	depends on ANDROID_BOOT_IMAGE
+	help
+	  Android Boot Image manipulation commands. Allows one to extract
+	  images contained in boot.img, like kernel, ramdisk, dtb, etc, and
+	  obtain corresponding meta-information from boot.img.
+
+	  See doc/android/boot-image.rst for details.
+
 config CMD_ELF
 	bool "bootelf, bootvx"
 	default y
+	select LIB_ELF
 	help
 	  Boot an ELF/vxWorks image from the memory.
 
@@ -692,7 +717,7 @@ config CMD_MEMORY
 	    base - print or set address offset
 	    loop - initialize loop on address range
 
-config MX_CYCLIC
+config CMD_MX_CYCLIC
 	bool "Enable cyclic md/mw commands"
 	depends on CMD_MEMORY
 	help
@@ -725,13 +750,23 @@ config SYS_ALT_MEMTEST
 	help
 	  Use a more complete alternative memory test.
 
-endif
+config SYS_MEMTEST_START
+	hex "default start address for mtest"
+	default 0
+	help
+	  This is the default start address for mtest for simple read/write
+	  test. If no arguments are given to mtest, default address is used
+	  as start address.
 
-config CMD_MX_CYCLIC
-	bool "mdc, mwc"
+config SYS_MEMTEST_END
+	hex "default end address for mtest"
+	default 0x1000
 	help
-	  mdc - memory display cyclic
-	  mwc - memory write cyclic
+	  This is the default end address for mtest for simple read/write
+	  test. If no arguments are given to mtest, default address is used
+	  as end address.
+
+endif
 
 config CMD_SHA1SUM
 	bool "sha1sum"
@@ -765,6 +800,13 @@ config CMD_LZMADEC
 	  Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
 	  image from memory.
 
+config CMD_UNLZ4
+	bool "unlz4"
+	default y if CMD_BOOTI
+	select LZ4
+	help
+	  Support decompressing an LZ4 image from memory region.
+
 config CMD_UNZIP
 	bool "unzip"
 	default y if CMD_BOOTI
@@ -870,7 +912,7 @@ config CMD_FASTBOOT
 	  Android devices. Fastboot requires either the network stack
 	  enabled or support for acting as a USB device.
 
-	  See doc/android/fastboot.txt for more information.
+	  See doc/android/fastboot.rst for more information.
 
 config CMD_FLASH
 	bool "flinfo, erase, protect"
@@ -1048,21 +1090,34 @@ config CMD_MMC
 	help
 	  MMC memory mapped support.
 
+if CMD_MMC
+
+config CMD_BKOPS_ENABLE
+	bool "mmc bkops enable"
+	depends on CMD_MMC
+	default n
+	help
+	  Enable command for setting manual background operations handshake
+	  on a eMMC device. The feature is optionally available on eMMC devices
+	  conforming to standard >= 4.41.
+
 config CMD_MMC_RPMB
 	bool "Enable support for RPMB in the mmc command"
-	depends on CMD_MMC
+	depends on SUPPORT_EMMC_RPMB
 	help
 	  Enable the commands for reading, writing and programming the
 	  key for the Replay Protection Memory Block partition in eMMC.
 
 config CMD_MMC_SWRITE
 	bool "mmc swrite"
-	depends on CMD_MMC && MMC_WRITE
+	depends on MMC_WRITE
 	select IMAGE_SPARSE
 	help
 	  Enable support for the "mmc swrite" command to write Android sparse
 	  images to eMMC.
 
+endif
+
 config CMD_MTD
 	bool "mtd"
 	depends on MTD
@@ -1595,15 +1650,6 @@ config CMD_BSP
 	  option provides a way to control this. The commands that are enabled
 	  vary depending on the board.
 
-config CMD_BKOPS_ENABLE
-	bool "mmc bkops enable"
-	depends on CMD_MMC
-	default n
-	help
-	  Enable command for setting manual background operations handshake
-	  on a eMMC device. The feature is optionally available on eMMC devices
-	  conforming to standard >= 4.41.
-
 config CMD_BLOCK_CACHE
 	bool "blkcache - control and stats for block cache"
 	depends on BLOCK_CACHE
@@ -2091,7 +2137,7 @@ config CMD_BEDBUG
 	help
 	  The bedbug (emBEDded deBUGger) command provides debugging features
 	  for some PowerPC processors. For details please see the
-	  docuemntation in doc/README.beddbug
+	  documentation in doc/README.bedbug.
 
 config CMD_DIAG
 	bool "diag - Board diagnostics"
@@ -2168,6 +2214,14 @@ config CMD_UBI
 	  It is also strongly encouraged to also enable CONFIG_MTD to get full
 	  partition support.
 
+config CMD_UBI_RENAME
+       bool "Enable rename"
+       depends on CMD_UBI
+       default n
+       help
+         Enable a "ubi" command to rename ubi volume:
+	   ubi rename <oldname> <newname>
+
 config CMD_UBIFS
 	tristate "Enable UBIFS - Unsorted block images filesystem commands"
 	depends on CMD_UBI