X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cmd%2FKconfig;h=07060c63a7e6f9cde9e26ade39c3c53e232bcc59;hb=20a229676e492d0e105d1ab535dba56f9f470ad0;hp=8d2e0a9e4ec426430abaa537783f56af9e38b1c5;hpb=8fc31e23aa83dfe9a01bec5738ccbed7d4ad442e;p=oweals%2Fu-boot.git

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 8d2e0a9e4e..07060c63a7 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -48,6 +48,8 @@ config SYS_LONGHELP
 
 config SYS_PROMPT
 	string "Shell prompt"
+	default "Zynq> " if ARCH_ZYNQ
+	default "ZynqMP> " if ARCH_ZYNQMP
 	default "=> "
 	help
 	  This string is displayed in the command line to the left of the
@@ -170,6 +172,15 @@ config AUTOBOOT_MENUKEY
 	  For example, 33 means "!" in ASCII, so pressing ! at boot would take
 	  this action.
 
+config AUTOBOOT_MENU_SHOW
+	bool "Show a menu on boot"
+	depends on CMD_BOOTMENU
+	help
+	  This enables the boot menu, controlled by environment variables
+	  defined by the board. The menu starts after running the 'preboot'
+	  environmnent variable (if enabled) and before handling the boot delay.
+	  See README.bootmenu for more details.
+
 endmenu
 
 config BUILD_BIN2C
@@ -259,6 +270,54 @@ config CMD_BOOTEFI
 	help
 	  Boot an EFI image from memory.
 
+config BOOTM_LINUX
+	bool "Support booting Linux OS images"
+	depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI
+	default y
+	help
+	  Support booting the Linux kernel directly via a command such as bootm
+	  or booti or bootz.
+
+config BOOTM_NETBSD
+	bool "Support booting NetBSD (non-EFI) loader images"
+	depends on CMD_BOOTM
+	default y
+	help
+	  Support booting NetBSD via the bootm command.
+
+config BOOTM_OPENRTOS
+	bool "Support booting OPENRTOS / FreeRTOS images"
+	depends on CMD_BOOTM
+	help
+	  Support booting OPENRTOS / FreeRTOS via the bootm command.
+
+config BOOTM_OSE
+	bool "Support booting Enea OSE images"
+	depends on CMD_BOOTM
+	help
+	  Support booting Enea OSE images via the bootm command.
+
+config BOOTM_PLAN9
+	bool "Support booting Plan9 OS images"
+	depends on CMD_BOOTM
+	default y
+	help
+	  Support booting Plan9 images via the bootm command.
+
+config BOOTM_RTEMS
+	bool "Support booting RTEMS OS images"
+	depends on CMD_BOOTM
+	default y
+	help
+	  Support booting RTEMS images via the bootm command.
+
+config BOOTM_VXWORKS
+	bool "Support booting VxWorks OS images"
+	depends on CMD_BOOTM
+	default y
+	help
+	  Support booting VxWorks images via the bootm command.
+
 config CMD_BOOTEFI_HELLO_COMPILE
 	bool "Compile a standard EFI hello world binary for testing"
 	depends on CMD_BOOTEFI && !CPU_V7M && !SANDBOX
@@ -474,7 +533,6 @@ config CMD_ENV_FLAGS
 config CMD_NVEDIT_EFI
 	bool "env [set|print] -e - set/print UEFI variables"
 	depends on EFI_LOADER
-	default y
 	imply HEXDUMP
 	help
 	  UEFI variables are encoded as some form of U-Boot variables.
@@ -603,6 +661,20 @@ config CMD_MEMORY
 	    base - print or set address offset
 	    loop - initialize loop on address range
 
+config MX_CYCLIC
+	bool "Enable cyclic md/mw commands"
+	depends on CMD_MEMORY
+	help
+          Add the "mdc" and "mwc" memory commands. These are cyclic
+          "md/mw" commands.
+          Examples:
+
+	  => mdc.b 10 4 500
+	  This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+	  => mwc.l 100 12345678 10
+	  This command will write 12345678 to address 100 all 10 ms.
+
 config CMD_RANDOM
 	bool "random"
 	default y
@@ -1034,14 +1106,6 @@ config CMD_PCI
 	  peripherals. Sub-commands allow bus enumeration, displaying and
 	  changing configuration space and a few other features.
 
-config CMD_PCMCIA
-	bool "pinit - Set up PCMCIA device"
-	help
-	  Provides a means to initialise a PCMCIA (Personal Computer Memory
-	  Card International Association) device. This is an old standard from
-	  about 1990. These devices are typically removable memory or network
-	  cards using a standard 68-pin connector.
-
 config CMD_PINMUX
 	bool "pinmux - show pins muxing"
 	default y if PINCTRL
@@ -1325,6 +1389,13 @@ config BOOTP_NTPSERVER
 	bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
 	depends on CMD_BOOTP
 
+config CMD_PCAP
+	bool "pcap capture"
+	help
+	  Selecting this will allow capturing all Ethernet packets and store
+	  them in physical memory in a PCAP formated file,
+	  later to be analyzed by PCAP reader application (IE. WireShark).
+
 config BOOTP_PXE
 	bool "Send PXE client arch to BOOTP/DHCP server"
 	default y
@@ -1447,7 +1518,7 @@ config CMD_BMP
 	bool "Enable 'bmp' command"
 	depends on LCD || DM_VIDEO || VIDEO
 	help
-	  This provides a way to obtain information about a BMP-format iamge
+	  This provides a way to obtain information about a BMP-format image
 	  and to display it. BMP (which presumably stands for BitMaP) is a
 	  file format defined by Microsoft which supports images of various
 	  depths, formats and compression methods. Headers on the file