X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fxilinx%2Fxupv2p%2Fxparameters.h;h=a96c693c551eeaa0bddf1365ed8524c4ad1a3c36;hb=bb701283a8dcb2521000fe437f19a83cadc98b02;hp=0bb7a805f4a9005088c103e0c74e6678c0d7eac4;hpb=19909edb97140a5ea3139705589bb90e023ab5e1;p=oweals%2Fu-boot.git

diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
index 0bb7a805f4..a96c693c55 100644
--- a/board/xilinx/xupv2p/xparameters.h
+++ b/board/xilinx/xupv2p/xparameters.h
@@ -28,24 +28,17 @@
 /* System Clock Frequency */
 #define XILINX_CLOCK_FREQ	100000000
 
-/* Microblaze is microblaze_0 */
-#define XILINX_USE_MSR_INSTR	1
-#define XILINX_PVR	0
-#define XILINX_FSL_NUMBER	0
-
 /* Interrupt controller is opb_intc_0 */
 #define XILINX_INTC_BASEADDR	0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS	7
+#define XILINX_INTC_NUM_INTR_INPUTS	11
 
 /* Timer pheriphery is opb_timer_1 */
 #define XILINX_TIMER_BASEADDR	0x41c00000
-#define XILINX_TIMER_IRQ	0
+#define XILINX_TIMER_IRQ	1
 
 /* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UARTLITE_BASEADDR	0x40600000
-#define XILINX_UARTLITE_BAUDRATE	115200
-
-/* IIC doesn't exist */
+#define XILINX_UART_BASEADDR	0x40600000
+#define XILINX_UART_BAUDRATE	115200
 
 /* GPIO is LEDs_4Bit*/
 #define XILINX_GPIO_BASEADDR	0x40000000
@@ -58,10 +51,14 @@
 
 /* Sysace Controller is SysACE_CompactFlash */
 #define XILINX_SYSACE_BASEADDR	0x41800000
+#define XILINX_SYSACE_HIGHADDR	0x4180ffff
 #define XILINX_SYSACE_MEM_WIDTH	16
 
 /* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMAC_BASEADDR	0x40c00000
-#define XILINX_EMAC_DMA_PRESENT	3
-#define XILINX_EMAC_HALF_DUPLEX_EXIST	1
-#define XILINX_EMAC_MII_EXIST	1
+#define XPAR_XEMAC_NUM_INSTANCES	1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID	0
+#define XPAR_OPB_ETHERNET_0_BASEADDR	0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR	0x40c0ffff
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT	1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST	1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST	1