X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fxilinx%2Fxupv2p%2Fxparameters.h;h=0bb7a805f4a9005088c103e0c74e6678c0d7eac4;hb=9c73f4b81172bc9f1b8f132450e69bcfb5b960ca;hp=a96c693c551eeaa0bddf1365ed8524c4ad1a3c36;hpb=e8aac8e7bfc7cfdef5780f8f1d4c85184f59a06f;p=oweals%2Fu-boot.git

diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
index a96c693c55..0bb7a805f4 100644
--- a/board/xilinx/xupv2p/xparameters.h
+++ b/board/xilinx/xupv2p/xparameters.h
@@ -28,17 +28,24 @@
 /* System Clock Frequency */
 #define XILINX_CLOCK_FREQ	100000000
 
+/* Microblaze is microblaze_0 */
+#define XILINX_USE_MSR_INSTR	1
+#define XILINX_PVR	0
+#define XILINX_FSL_NUMBER	0
+
 /* Interrupt controller is opb_intc_0 */
 #define XILINX_INTC_BASEADDR	0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS	11
+#define XILINX_INTC_NUM_INTR_INPUTS	7
 
 /* Timer pheriphery is opb_timer_1 */
 #define XILINX_TIMER_BASEADDR	0x41c00000
-#define XILINX_TIMER_IRQ	1
+#define XILINX_TIMER_IRQ	0
 
 /* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UART_BASEADDR	0x40600000
-#define XILINX_UART_BAUDRATE	115200
+#define XILINX_UARTLITE_BASEADDR	0x40600000
+#define XILINX_UARTLITE_BAUDRATE	115200
+
+/* IIC doesn't exist */
 
 /* GPIO is LEDs_4Bit*/
 #define XILINX_GPIO_BASEADDR	0x40000000
@@ -51,14 +58,10 @@
 
 /* Sysace Controller is SysACE_CompactFlash */
 #define XILINX_SYSACE_BASEADDR	0x41800000
-#define XILINX_SYSACE_HIGHADDR	0x4180ffff
 #define XILINX_SYSACE_MEM_WIDTH	16
 
 /* Ethernet controller is Ethernet_MAC */
-#define XPAR_XEMAC_NUM_INSTANCES	1
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID	0
-#define XPAR_OPB_ETHERNET_0_BASEADDR	0x40c00000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR	0x40c0ffff
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT	1
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST	1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST	1
+#define XILINX_EMAC_BASEADDR	0x40c00000
+#define XILINX_EMAC_DMA_PRESENT	3
+#define XILINX_EMAC_HALF_DUPLEX_EXIST	1
+#define XILINX_EMAC_MII_EXIST	1