X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fxilinx%2Fml401%2Fxparameters.h;h=1a116ead1b78c211e93c5f3fd8d7e00508f82885;hb=9c73f4b81172bc9f1b8f132450e69bcfb5b960ca;hp=18d24f9c1d1ed07d195531dc133f800db6d023f4;hpb=61ea75aa07838435ec570ac85a2e3fc038844596;p=oweals%2Fu-boot.git

diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h
index 18d24f9c1d..1a116ead1b 100644
--- a/board/xilinx/ml401/xparameters.h
+++ b/board/xilinx/ml401/xparameters.h
@@ -21,47 +21,55 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
- *
  * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+ * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
  */
 
 /* System Clock Frequency */
-#define XILINX_CLOCK_FREQ	66666667
+#define XILINX_CLOCK_FREQ	100000000
+
+/* Microblaze is microblaze_0 */
+#define XILINX_USE_MSR_INSTR	1
+#define XILINX_FSL_NUMBER	3
 
-/* Interrupt controller is intc_0 */
-#define XILINX_INTC_BASEADDR	0xd1000fc0
-#define XILINX_INTC_NUM_INTR_INPUTS	12
+/* Interrupt controller is opb_intc_0 */
+#define XILINX_INTC_BASEADDR	0x41200000
+#define XILINX_INTC_NUM_INTR_INPUTS	6
 
-/* Timer pheriphery is opb_timer_0 */
-#define XILINX_TIMER_BASEADDR	0xa2000000
+/* Timer pheriphery is opb_timer_1 */
+#define XILINX_TIMER_BASEADDR	0x41c00000
 #define XILINX_TIMER_IRQ	0
 
-/* Uart pheriphery is console_uart */
-#define XILINX_UART_BASEADDR	0xa0000000
+/* Uart pheriphery is RS232_Uart */
+#define XILINX_UART_BASEADDR	0x40600000
 #define XILINX_UART_BAUDRATE	115200
 
-/* GPIO is opb_gpio_0*/
-#define XILINX_GPIO_BASEADDR	0x90000000
+/* IIC pheriphery is IIC_EEPROM */
+#define XILINX_IIC_0_BASEADDR	0x40800000
+#define XILINX_IIC_0_FREQ	100000
+#define XILINX_IIC_0_BIT	0
+
+/* GPIO is LEDs_4Bit*/
+#define XILINX_GPIO_BASEADDR	0x40000000
 
-/* Flash Memory is opb_emc_0 */
-#define XILINX_FLASH_START	0x28000000
+/* Flash Memory is FLASH_2Mx32 */
+#define XILINX_FLASH_START	0x2c000000
 #define XILINX_FLASH_SIZE	0x00800000
 
-/* Main Memory is plb_ddr_0 */
-#define XILINX_RAM_START	0x10000000
-#define XILINX_RAM_SIZE	0x10000000
+/* Main Memory is DDR_SDRAM_64Mx32 */
+#define XILINX_RAM_START	0x28000000
+#define XILINX_RAM_SIZE	0x04000000
 
-/* Sysace Controller is opb_sysace_0 */
-#define XILINX_SYSACE_BASEADDR	0xCF000000
-#define XILINX_SYSACE_HIGHADDR	0xCF0001FF
+/* Sysace Controller is SysACE_CompactFlash */
+#define XILINX_SYSACE_BASEADDR	0x41800000
+#define XILINX_SYSACE_HIGHADDR	0x4180ffff
 #define XILINX_SYSACE_MEM_WIDTH	16
 
-/* Ethernet controller is opb_ethernet_0 */
+/* Ethernet controller is Ethernet_MAC */
 #define XPAR_XEMAC_NUM_INSTANCES	1
 #define XPAR_OPB_ETHERNET_0_DEVICE_ID	0
-#define XPAR_OPB_ETHERNET_0_BASEADDR	0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR	0x60003FFF
+#define XPAR_OPB_ETHERNET_0_BASEADDR	0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR	0x40c0ffff
 #define XPAR_OPB_ETHERNET_0_DMA_PRESENT	1
 #define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST	1
 #define XPAR_OPB_ETHERNET_0_MII_EXIST	1