X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fti%2Fbeagle%2Fled.c;h=ac21a95732262b8e807d89ca7cf3d8f95cca7a6c;hb=895f3e0542015b347298c8b501e63d5f32002c04;hp=f08c08ad884f3881ea3ebb2ca38ff16e9539df68;hpb=6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833;p=oweals%2Fu-boot.git

diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
index f08c08ad88..ac21a95732 100644
--- a/board/ti/beagle/led.c
+++ b/board/ti/beagle/led.c
@@ -22,19 +22,19 @@
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 
 /* GPIO pins for the LEDs */
 #define BEAGLE_LED_USR0	150
 #define BEAGLE_LED_USR1	149
 
 #ifdef STATUS_LED_GREEN
-void green_LED_off (void)
+void green_led_off(void)
 {
 	__led_set (STATUS_LED_GREEN, 0);
 }
 
-void green_LED_on (void)
+void green_led_on(void)
 {
 	__led_set (STATUS_LED_GREEN, 1);
 }
@@ -57,10 +57,10 @@ void __led_toggle (led_id_t mask)
 		toggle_gpio = BEAGLE_LED_USR1;
 #endif
 	if (toggle_gpio) {
-		if (!omap_request_gpio(toggle_gpio)) {
-			omap_set_gpio_direction(toggle_gpio, 0);
-			state = omap_get_gpio_dataout(toggle_gpio);
-			omap_set_gpio_dataout(toggle_gpio, !state);
+		if (!gpio_request(toggle_gpio, "")) {
+			gpio_direction_output(toggle_gpio, 0);
+			state = gpio_get_value(toggle_gpio);
+			gpio_set_value(toggle_gpio, !state);
 		}
 	}
 }
@@ -69,17 +69,17 @@ void __led_set (led_id_t mask, int state)
 {
 #ifdef STATUS_LED_BIT
 	if (STATUS_LED_BIT & mask) {
-		if (!omap_request_gpio(BEAGLE_LED_USR0)) {
-			omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
-			omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
+		if (!gpio_request(BEAGLE_LED_USR0, "")) {
+			gpio_direction_output(BEAGLE_LED_USR0, 0);
+			gpio_set_value(BEAGLE_LED_USR0, state);
 		}
 	}
 #endif
 #ifdef STATUS_LED_BIT1
 	if (STATUS_LED_BIT1 & mask) {
-		if (!omap_request_gpio(BEAGLE_LED_USR1)) {
-			omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
-			omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
+		if (!gpio_request(BEAGLE_LED_USR1, "")) {
+			gpio_direction_output(BEAGLE_LED_USR1, 0);
+			gpio_set_value(BEAGLE_LED_USR1, state);
 		}
 	}
 #endif