X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fti%2Fbeagle%2Fbeagle.c;h=826aace3fba24ee91216d63d4f6dde7ddc3a3cd3;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=ff317efc2c75de39a88f32b39c7d45a81753ab6a;hpb=c7b9686d5d482c8e952598841ea467e6ec0ec0de;p=oweals%2Fu-boot.git

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ff317efc2c..826aace3fb 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2004-2011
  * Texas Instruments, <www.ti.com>
@@ -10,17 +11,15 @@
  *	Richard Woodruff <r-woodruff2@ti.com>
  *	Syed Mohammed Khasim <khasim@ti.com>
  *
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
 #include <dm.h>
 #include <ns16550.h>
-#ifdef CONFIG_STATUS_LED
+#ifdef CONFIG_LED_STATUS
 #include <status_led.h>
 #endif
 #include <twl4030.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <asm/io.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/mux.h>
@@ -29,14 +28,14 @@
 #include <asm/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/omap_musb.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/musb.h>
 #include "beagle.h"
 #include <command.h>
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -73,9 +72,10 @@ static struct {
 } expansion_config;
 
 static const struct ns16550_platdata beagle_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK,
+	.fcr = UART_FCR_DEFVAL,
 };
 
 U_BOOT_DEVICE(beagle_uart) = {
@@ -95,13 +95,24 @@ int board_init(void)
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-	status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
+#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
+	status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
 #endif
 
 	return 0;
 }
 
+#if defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+	return 0;
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
 /*
  * Routine: get_board_revision
  * Description: Detect if we are running on a Beagle revision Ax/Bx,
@@ -340,16 +351,16 @@ int misc_init_r(void)
 	switch (get_board_revision()) {
 	case REVISION_AXBX:
 		printf("Beagle Rev Ax/Bx\n");
-		setenv("beaglerev", "AxBx");
+		env_set("beaglerev", "AxBx");
 		break;
 	case REVISION_CX:
 		printf("Beagle Rev C1/C2/C3\n");
-		setenv("beaglerev", "Cx");
+		env_set("beaglerev", "Cx");
 		MUX_BEAGLE_C();
 		break;
 	case REVISION_C4:
 		printf("Beagle Rev C4\n");
-		setenv("beaglerev", "C4");
+		env_set("beaglerev", "C4");
 		MUX_BEAGLE_C();
 		/* Set VAUX2 to 1.8V for EHCI PHY */
 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -359,7 +370,7 @@ int misc_init_r(void)
 		break;
 	case REVISION_XM_AB:
 		printf("Beagle xM Rev A/B\n");
-		setenv("beaglerev", "xMAB");
+		env_set("beaglerev", "xMAB");
 		MUX_BEAGLE_XM();
 		/* Set VAUX2 to 1.8V for EHCI PHY */
 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -370,7 +381,7 @@ int misc_init_r(void)
 		break;
 	case REVISION_XM_C:
 		printf("Beagle xM Rev C\n");
-		setenv("beaglerev", "xMC");
+		env_set("beaglerev", "xMC");
 		MUX_BEAGLE_XM();
 		/* Set VAUX2 to 1.8V for EHCI PHY */
 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -396,14 +407,14 @@ int misc_init_r(void)
 			expansion_config.revision,
 			expansion_config.fab_revision);
 		MUX_TINCANTOOLS_ZIPPY();
-		setenv("buddy", "zippy");
+		env_set("buddy", "zippy");
 		break;
 	case TINCANTOOLS_ZIPPY2:
 		printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
 			expansion_config.revision,
 			expansion_config.fab_revision);
 		MUX_TINCANTOOLS_ZIPPY();
-		setenv("buddy", "zippy2");
+		env_set("buddy", "zippy2");
 		break;
 	case TINCANTOOLS_TRAINER:
 		printf("Recognized Tincantools Trainer board (rev %d %s)\n",
@@ -411,44 +422,44 @@ int misc_init_r(void)
 			expansion_config.fab_revision);
 		MUX_TINCANTOOLS_ZIPPY();
 		MUX_TINCANTOOLS_TRAINER();
-		setenv("buddy", "trainer");
+		env_set("buddy", "trainer");
 		break;
 	case TINCANTOOLS_SHOWDOG:
 		printf("Recognized Tincantools Showdow board (rev %d %s)\n",
 			expansion_config.revision,
 			expansion_config.fab_revision);
 		/* Place holder for DSS2 definition for showdog lcd */
-		setenv("defaultdisplay", "showdoglcd");
-		setenv("buddy", "showdog");
+		env_set("defaultdisplay", "showdoglcd");
+		env_set("buddy", "showdog");
 		break;
 	case KBADC_BEAGLEFPGA:
 		printf("Recognized KBADC Beagle FPGA board\n");
 		MUX_KBADC_BEAGLEFPGA();
-		setenv("buddy", "beaglefpga");
+		env_set("buddy", "beaglefpga");
 		break;
 	case LW_BEAGLETOUCH:
 		printf("Recognized Liquidware BeagleTouch board\n");
-		setenv("buddy", "beagletouch");
+		env_set("buddy", "beagletouch");
 		break;
 	case BRAINMUX_LCDOG:
 		printf("Recognized Brainmux LCDog board\n");
-		setenv("buddy", "lcdog");
+		env_set("buddy", "lcdog");
 		break;
 	case BRAINMUX_LCDOGTOUCH:
 		printf("Recognized Brainmux LCDog Touch board\n");
-		setenv("buddy", "lcdogtouch");
+		env_set("buddy", "lcdogtouch");
 		break;
 	case BBTOYS_WIFI:
 		printf("Recognized BeagleBoardToys WiFi board\n");
 		MUX_BBTOYS_WIFI()
-		setenv("buddy", "bbtoys-wifi");
-		break;;
+		env_set("buddy", "bbtoys-wifi");
+		break;
 	case BBTOYS_VGA:
 		printf("Recognized BeagleBoardToys VGA board\n");
-		break;;
+		break;
 	case BBTOYS_LCD:
 		printf("Recognized BeagleBoardToys LCD board\n");
-		break;;
+		break;
 	case BCT_BRETTL3:
 		printf("Recognized bct electronic GmbH brettl3 board\n");
 		break;
@@ -458,20 +469,20 @@ int misc_init_r(void)
 	case LSR_COM6L_ADPT:
 		printf("Recognized LSR COM6L Adapter Board\n");
 		MUX_BBTOYS_WIFI()
-		setenv("buddy", "lsr-com6l-adpt");
+		env_set("buddy", "lsr-com6l-adpt");
 		break;
 	case BEAGLE_NO_EEPROM:
 		printf("No EEPROM on expansion board\n");
-		setenv("buddy", "none");
+		env_set("buddy", "none");
 		break;
 	default:
 		printf("Unrecognized expansion board: %x\n",
 			expansion_config.device_vendor);
-		setenv("buddy", "unknown");
+		env_set("buddy", "unknown");
 	}
 
 	if (expansion_config.content == 1)
-		setenv(expansion_config.env_var, expansion_config.env_setting);
+		env_set(expansion_config.env_var, expansion_config.env_setting);
 
 	twl4030_power_init();
 	switch (get_board_revision()) {
@@ -509,6 +520,14 @@ int misc_init_r(void)
 	if (generate_fake_mac)
 		omap_die_id_usbethaddr();
 
+#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)
+	if (strlen(CONFIG_MTDIDS_DEFAULT))
+		env_set("mtdids", CONFIG_MTDIDS_DEFAULT);
+
+	if (strlen(CONFIG_MTDPARTS_DEFAULT))
+		env_set("mtdparts", CONFIG_MTDPARTS_DEFAULT);
+#endif
+
 	return 0;
 }
 
@@ -523,21 +542,21 @@ void set_muxconf_regs(void)
 	MUX_BEAGLE();
 }
 
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_MMC)
 int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
 #endif
 
-#if defined(CONFIG_GENERIC_MMC)
+#if defined(CONFIG_MMC)
 void board_mmc_power_init(void)
 {
 	twl4030_power_mmc_init(0);
 }
 #endif
 
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
 /* Call usb_stop() before starting the kernel */
 void show_boot_progress(int val)
 {
@@ -562,7 +581,7 @@ int ehci_hcd_stop(int index)
 	return omap_ehci_hcd_stop();
 }
 
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
 
 #if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
 int board_eth_init(bd_t *bis)