X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fsc520_cdp%2Fsc520_cdp.c;h=f6f0e7244377e282ddcfdccce3f8cd7785f87185;hb=a0dd99d51efa55fe023e19c97ead92683725eb11;hp=50a49e601a5e96ae98d6dc3231f76b42b6b8c249;hpb=7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed;p=oweals%2Fu-boot.git diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index 50a49e601a..f6f0e72443 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -1,5 +1,5 @@ /* - * + * * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB . * @@ -28,7 +28,9 @@ #include #include #include -#include +#include + +DECLARE_GLOBAL_DATA_PTR; #undef SC520_CDP_DEBUG @@ -40,11 +42,11 @@ /* ------------------------------------------------------------------------- */ - -/* + +/* * Theory: * We first set up all IRQs to be non-pci, edge triggered, - * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets + * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets * called we reallocate irqs to the pci bus with sc520_pci_set_irq() * as needed. Whe choose the irqs to gram from a configurable list * inside pci_sc520_fixup_irq() (If this list contains stupid irq's @@ -54,48 +56,48 @@ static void irq_init(void) { /* disable global interrupt mode */ - write_mmcr_byte(SC520_PICICR, 0x40); - + write_mmcr_byte(SC520_PICICR, 0x40); + /* set all irqs to edge */ write_mmcr_byte(SC520_MPICMODE, 0x00); write_mmcr_byte(SC520_SL1PICMODE, 0x00); write_mmcr_byte(SC520_SL2PICMODE, 0x00); - - /* active low polarity on PIC interrupt pins, + + /* active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ write_mmcr_word(SC520_INTPINPOL, 0x0000); /* set irq number mapping */ - write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ + write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */ write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */ - write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ + write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */ write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */ write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */ write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */ write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */ write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */ - write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ + write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ write_mmcr_byte(SC520_SSIMAP, SC520_IRQ_DISABLED); /* disable Synchronius serial INT */ write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */ write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */ write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */ write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */ write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */ - + if (CFG_USE_SIO_UART) { write_mmcr_byte(SC520_UART1MAP, SC520_IRQ_DISABLED); /* disable internal UART1 INT */ write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); /* disable internal UART2 INT */ - write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ + write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ4); /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */ } else { write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */ write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */ - write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ3 (ISA IRQ3) */ + write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ3 (ISA IRQ3) */ write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ4 (ISA IRQ4) */ } - + write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ1); /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */ write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ5); /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */ write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ6); /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */ @@ -104,14 +106,14 @@ static void irq_init(void) write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ9); /* Set GPIRQ9 (ISA IRQ2) to IRQ9 */ write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ11); /* Set GPIRQ0 (ISA IRQ11) to IRQ10 */ write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ12); /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */ - write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14); /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */ - + write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14); /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */ + write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */ write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */ - + } - + /* PCI stuff */ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { @@ -125,64 +127,63 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) CFG_FORTH_PCI_IRQ }; static int next_irq_index=0; - - char tmp_pin; + + char tmp_pin; int pin; - + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); pin = tmp_pin; - + pin-=1; /* pci config space use 1-based numbering */ if (-1 == pin) { return; /* device use no irq */ } - - - + + /* map device number + pin to a pin on the sc520 */ switch (PCI_DEV(dev)) { case 20: pin+=SC520_PCI_INTA; break; - + case 19: pin+=SC520_PCI_INTB; break; - + case 18: pin+=SC520_PCI_INTC; break; - + case 17: pin+=SC520_PCI_INTD; break; - - default: + + default: return; } - + pin&=3; /* wrap around */ - + if (sc520_pci_ints[pin] == -1) { - /* re-route one interrupt for us */ + /* re-route one interrupt for us */ if (next_irq_index > 3) { return; } - if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { + if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { return; } next_irq_index++; } - + if (-1 != sc520_pci_ints[pin]) { - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, sc520_pci_ints[pin]); } - PRINTF("fixup_irq: device %d pin %c irq %d\n", + PRINTF("fixup_irq: device %d pin %c irq %d\n", PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); } - + static struct pci_controller sc520_cdp_hose = { fixup_irq: pci_sc520_cdp_fixup_irq, }; @@ -201,7 +202,7 @@ static void silence_uart(int port) void setup_ali_sio(int uart_primary) { ali512x_init(); - + ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0); ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3); ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4); @@ -209,21 +210,21 @@ void setup_ali_sio(int uart_primary) ali512x_set_rtc(ALI_DISABLED, 0, 0); ali512x_set_kbc(ALI_ENABLED, 1, 12); ali512x_set_cio(ALI_ENABLED); - + /* IrDa pins */ ali512x_cio_function(12, 1, 0, 0); ali512x_cio_function(13, 1, 0, 0); - + /* SSI chip select pins */ ali512x_cio_function(14, 0, 0, 0); /* SSI_CS */ - ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */ + ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */ ali512x_cio_function(16, 0, 0, 0); /* SSI_SPI# */ /* Board REV pins */ ali512x_cio_function(20, 0, 0, 1); ali512x_cio_function(21, 0, 0, 1); ali512x_cio_function(22, 0, 0, 1); - ali512x_cio_function(23, 0, 0, 1); + ali512x_cio_function(23, 0, 0, 1); } @@ -232,54 +233,53 @@ static void bus_init(void) { /* set up the GP IO pins */ - write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */ write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */ write_mmcr_byte(SC520_CLKSEL, 0x70); - - write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ + + write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ - write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ + write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ - write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */ + write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */ write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up timing of ROMCS1 */ - write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */ - + write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */ + /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio - * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ - - - + * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ + + /* SRAM = GPCS3 128k @ d0000-effff*/ - write_mmcr_long(SC520_PAR2, 0x4e00400d); - + write_mmcr_long(SC520_PAR2, 0x4e00400d); + /* IDE0 = GPCS6 1f0-1f7 */ - write_mmcr_long(SC520_PAR3, 0x380801f0); + write_mmcr_long(SC520_PAR3, 0x380801f0); /* IDE1 = GPCS7 3f6 */ - write_mmcr_long(SC520_PAR4, 0x3c0003f6); + write_mmcr_long(SC520_PAR4, 0x3c0003f6); /* bootcs */ - write_mmcr_long(SC520_PAR12, 0x8bffe800); + write_mmcr_long(SC520_PAR12, 0x8bffe800); /* romcs2 */ - write_mmcr_long(SC520_PAR13, 0xcbfff000); + write_mmcr_long(SC520_PAR13, 0xcbfff000); /* romcs1 */ - write_mmcr_long(SC520_PAR14, 0xabfff800); + write_mmcr_long(SC520_PAR14, 0xabfff800); /* 680 LEDS */ - write_mmcr_long(SC520_PAR15, 0x30000640); - + write_mmcr_long(SC520_PAR15, 0x30000640); + write_mmcr_byte(SC520_ADDDECCTL, 0); - - asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ + + asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ if (CFG_USE_SIO_UART) { - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS); + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS); setup_ali_sio(1); } else { write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); @@ -321,21 +321,21 @@ static void bus_init(void) * PAR15 Port 0x680 LED display */ -/* +/* * This function should map a chunk of size bytes * of the system address space to the ISA bus - * + * * The function will return the memory address * as seen by the host (which may very will be the * same as the bus address) */ -u32 isa_map_rom(u32 bus_addr, int size) +u32 isa_map_rom(u32 bus_addr, int size) { u32 par; - - PRINTF("isa_map_rom asked to map %d bytes at %x\n", + + PRINTF("isa_map_rom asked to map %d bytes at %x\n", size, bus_addr); - + par = size; if (par < 0x80000) { par = 0x80000; @@ -346,12 +346,12 @@ u32 isa_map_rom(u32 bus_addr, int size) par <<= 18; par |= (bus_addr>>12); par |= 0x50000000; - + PRINTF ("setting PAR11 to %x\n", par); - + /* Map rom 0x10000 with PAR1 */ write_mmcr_long(SC520_PAR11, par); - + return bus_addr; } @@ -372,19 +372,19 @@ void isa_unmap_rom(u32 addr) #ifdef CONFIG_PCI #define PCI_ROM_TEMP_SPACE 0x10000 -/* +/* * This function should map a chunk of size bytes * of the system address space to the PCI bus, * suitable to map PCI ROMS (bus address < 16M) * the function will return the host memory address * which should be converted into a bus address - * before used to configure the PCI rom address + * before used to configure the PCI rom address * decoder */ -u32 pci_get_rom_window(struct pci_controller *hose, int size) +u32 pci_get_rom_window(struct pci_controller *hose, int size) { u32 par; - + par = size; if (par < 0x80000) { par = 0x80000; @@ -395,12 +395,12 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size) par <<= 14; par |= (PCI_ROM_TEMP_SPACE>>16); par |= 0x72000000; - + PRINTF ("setting PAR1 to %x\n", par); - + /* Map rom 0x10000 with PAR1 */ write_mmcr_long(SC520_PAR1, par); - + return PCI_ROM_TEMP_SPACE; } @@ -417,61 +417,61 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) return; } PRINTF(" not ours\n"); - + } /* * This function is called in order to provide acces to the - * legacy video I/O ports on the PCI bus. - * After this function accesses to I/O ports 0x3b0-0x3bb and + * legacy video I/O ports on the PCI bus. + * After this function accesses to I/O ports 0x3b0-0x3bb and * 0x3c0-0x3df shuld result in transactions on the PCI bus. - * + * */ int pci_enable_legacy_video_ports(struct pci_controller *hose) { /* Map video memory to 0xa0000*/ write_mmcr_long(SC520_PAR0, 0x7200400a); - + /* forward all I/O accesses to PCI */ - write_mmcr_byte(SC520_ADDDECCTL, - read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); - - + write_mmcr_byte(SC520_ADDDECCTL, + read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); + + /* so we map away all io ports to pci (only way to access pci io * below 0x400. But then we have to map back the portions that we dont * use so that the generate cycles on the GPIO bus where the sio and - * ISA slots are connected, this requre the use of several PAR registers + * ISA slots are connected, this requre the use of several PAR registers */ - + /* bring 0x100 - 0x1ef back to ISA using PAR5 */ - write_mmcr_long(SC520_PAR5, 0x30ef0100); - + write_mmcr_long(SC520_PAR5, 0x30ef0100); + /* IDE use 1f0-1f7 */ - + /* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */ - write_mmcr_long(SC520_PAR6, 0x30ff01f8); - + write_mmcr_long(SC520_PAR6, 0x30ff01f8); + /* com2 use 2f8-2ff */ - + /* bring 0x300 - 0x3af back to ISA using PAR7 */ - write_mmcr_long(SC520_PAR7, 0x30af0300); - + write_mmcr_long(SC520_PAR7, 0x30af0300); + /* vga use 3b0-3bb */ - + /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ - write_mmcr_long(SC520_PAR8, 0x300303bc); - + write_mmcr_long(SC520_PAR8, 0x300303bc); + /* vga use 3c0-3df */ - + /* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */ - write_mmcr_long(SC520_PAR9, 0x301503e0); - + write_mmcr_long(SC520_PAR9, 0x301503e0); + /* ide use 3f6 */ - + /* bring 0x3f7 back to ISA using PAR10 */ - write_mmcr_long(SC520_PAR10, 0x300003f7); - - /* com1 use 3f8-3ff */ + write_mmcr_long(SC520_PAR10, 0x300003f7); + + /* com1 use 3f8-3ff */ return 0; } @@ -483,21 +483,19 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - - init_sc520(); + init_sc520(); bus_init(); irq_init(); - + /* max drive current on SDRAM */ write_mmcr_word(SC520_DSCTL, 0x0100); - + /* enter debug mode after next reset (only if jumper is also set) */ write_mmcr_byte(SC520_RESCFG, 0x08); /* configure the software timer to 33.333MHz */ write_mmcr_byte(SC520_SWTMRCFG, 0); gd->bus_clk = 33333000; - + return 0; } @@ -509,6 +507,7 @@ int dram_init(void) void show_boot_progress(int val) { + if (val < -32) val = -1; /* let things compatible */ outb(val&0xff, 0x80); outb((val&0xff00)>>8, 0x680); } @@ -518,98 +517,115 @@ int last_stage_init(void) { int minor; int major; - + major = minor = 0; major |= ali512x_cio_in(23)?2:0; major |= ali512x_cio_in(22)?1:0; minor |= ali512x_cio_in(21)?2:0; minor |= ali512x_cio_in(20)?1:0; - + printf("AMD SC520 CDP revision %d.%d\n", major, minor); - + return 0; } - -void ssi_chip_select(int dev) +void ssi_chip_select(int dev) { - + /* Spunk board: SPI EEPROM is active-low, MW EEPROM and AUX are active high */ switch (dev) { case 1: /* SPI EEPROM */ ali512x_cio_out(16, 0); break; - + case 2: /* MW EEPROM */ ali512x_cio_out(15, 1); break; - - case 3: /* AUX */ + + case 3: /* AUX */ ali512x_cio_out(14, 1); break; - + case 0: ali512x_cio_out(16, 1); ali512x_cio_out(15, 0); ali512x_cio_out(14, 0); break; - + default: printf("Illegal SSI device requested: %d\n", dev); } } +void spi_eeprom_probe(int x) +{ +} + +int spi_eeprom_read(int x, int offset, char *buffer, int len) +{ + return 0; +} + +int spi_eeprom_write(int x, int offset, char *buffer, int len) +{ + return 0; +} -void spi_init_f(void) +void spi_init_f(void) { #ifdef CONFIG_SC520_CDP_USE_SPI - spi_eeprom_probe(1); -#endif + spi_eeprom_probe(1); +#endif #ifdef CONFIG_SC520_CDP_USE_MW mw_eeprom_probe(2); -#endif +#endif } -ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) +ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) { int offset; int i; ssize_t res; - + offset = 0; for (i=0;i