X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fsamsung%2Ftrats2%2Ftrats2.c;h=7b28ae8cc72c8adc7e20e8ad3ae8f66b823d14ca;hb=5d5716eebccaa9b9ab977b7d5a9fae2abb7a8829;hp=8df85ee39640b70a9ee9e800eba000b47cfc90f2;hpb=76a8265b4f54d1b9cd2b70efb46dcdeaa5d20bfb;p=oweals%2Fu-boot.git diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index 8df85ee396..7b28ae8cc7 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -8,15 +8,10 @@ #include #include -#include -#include -#include -#include -#include -#include -#include +#include #include #include +#include #include #include #include @@ -25,12 +20,12 @@ #include #include #include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; -static struct exynos4x12_gpio_part1 *gpio1; -static struct exynos4x12_gpio_part2 *gpio2; - static unsigned int board_rev = -1; static inline u32 get_model_rev(void); @@ -38,46 +33,41 @@ static inline u32 get_model_rev(void); static void check_hw_revision(void) { int modelrev = 0; + char str[12]; int i; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; - /* * GPM1[1:0]: MODEL_REV[1:0] * Don't set as pull-none for these N/C pin. * TRM say that it may cause unexcepted state and leakage current. * and pull-none is only for output function. */ - for (i = 0; i < 2; i++) - s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT); + for (i = 0; i < 2; i++) { + int pin = i + EXYNOS4X12_GPIO_M10; + + sprintf(str, "model_rev%d", i); + gpio_request(pin, str); + gpio_cfg_pin(pin, S5P_GPIO_INPUT); + } /* GPM1[5:2]: HW_REV[3:0] */ - for (i = 2; i < 6; i++) { - s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT); - s5p_gpio_set_pull(&gpio2->m1, i, GPIO_PULL_NONE); + for (i = 0; i < 4; i++) { + int pin = i + EXYNOS4X12_GPIO_M12; + + sprintf(str, "hw_rev%d", i); + gpio_request(pin, str); + gpio_cfg_pin(pin, S5P_GPIO_INPUT); + gpio_set_pull(pin, S5P_GPIO_PULL_NONE); } /* GPM1[1:0]: MODEL_REV[1:0] */ for (i = 0; i < 2; i++) - modelrev |= (s5p_gpio_get_value(&gpio2->m1, i) << i); + modelrev |= (gpio_get_value(EXYNOS4X12_GPIO_M10 + i) << i); /* board_rev[15:8] = model */ board_rev = modelrev << 8; } -#ifdef CONFIG_DISPLAY_BOARDINFO -int checkboard(void) -{ - puts("Board:\tTRATS2\n"); - return 0; -} -#endif - -static void show_hw_revision(void) -{ - printf("HW Revision:\t0x%04x\n", board_rev); -} - u32 get_board_rev(void) { return board_rev; @@ -90,26 +80,24 @@ static inline u32 get_model_rev(void) static void board_external_gpio_init(void) { - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; - /* * some pins which in alive block are connected with external pull-up * but it's default setting is pull-down. * if that pin set as input then that floated */ - s5p_gpio_set_pull(&gpio2->x0, 2, GPIO_PULL_NONE); /* PS_ALS_INT */ - s5p_gpio_set_pull(&gpio2->x0, 4, GPIO_PULL_NONE); /* TSP_nINT */ - s5p_gpio_set_pull(&gpio2->x0, 7, GPIO_PULL_NONE); /* AP_PMIC_IRQ*/ - s5p_gpio_set_pull(&gpio2->x1, 5, GPIO_PULL_NONE); /* IF_PMIC_IRQ*/ - s5p_gpio_set_pull(&gpio2->x2, 0, GPIO_PULL_NONE); /* VOL_UP */ - s5p_gpio_set_pull(&gpio2->x2, 1, GPIO_PULL_NONE); /* VOL_DOWN */ - s5p_gpio_set_pull(&gpio2->x2, 3, GPIO_PULL_NONE); /* FUEL_ALERT */ - s5p_gpio_set_pull(&gpio2->x2, 4, GPIO_PULL_NONE); /* ADC_INT */ - s5p_gpio_set_pull(&gpio2->x2, 7, GPIO_PULL_NONE); /* nPOWER */ - s5p_gpio_set_pull(&gpio2->x3, 0, GPIO_PULL_NONE); /* WPC_INT */ - s5p_gpio_set_pull(&gpio2->x3, 5, GPIO_PULL_NONE); /* OK_KEY */ - s5p_gpio_set_pull(&gpio2->x3, 7, GPIO_PULL_NONE); /* HDMI_HPD */ + gpio_set_pull(EXYNOS4X12_GPIO_X02, S5P_GPIO_PULL_NONE); /* PS_ALS_INT */ + gpio_set_pull(EXYNOS4X12_GPIO_X04, S5P_GPIO_PULL_NONE); /* TSP_nINT */ + gpio_set_pull(EXYNOS4X12_GPIO_X07, S5P_GPIO_PULL_NONE); /* AP_PMIC_IRQ*/ + gpio_set_pull(EXYNOS4X12_GPIO_X15, S5P_GPIO_PULL_NONE); /* IF_PMIC_IRQ*/ + gpio_set_pull(EXYNOS4X12_GPIO_X20, S5P_GPIO_PULL_NONE); /* VOL_UP */ + gpio_set_pull(EXYNOS4X12_GPIO_X21, S5P_GPIO_PULL_NONE); /* VOL_DOWN */ + gpio_set_pull(EXYNOS4X12_GPIO_X23, S5P_GPIO_PULL_NONE); /* FUEL_ALERT */ + gpio_set_pull(EXYNOS4X12_GPIO_X24, S5P_GPIO_PULL_NONE); /* ADC_INT */ + gpio_set_pull(EXYNOS4X12_GPIO_X27, S5P_GPIO_PULL_NONE); /* nPOWER */ + gpio_set_pull(EXYNOS4X12_GPIO_X30, S5P_GPIO_PULL_NONE); /* WPC_INT */ + gpio_set_pull(EXYNOS4X12_GPIO_X35, S5P_GPIO_PULL_NONE); /* OK_KEY */ + gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */ } #ifdef CONFIG_SYS_I2C_INIT_BOARD @@ -117,9 +105,6 @@ static void board_init_i2c(void) { int err; - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; - /* I2C_7 */ err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); if (err) { @@ -128,12 +113,16 @@ static void board_init_i2c(void) } /* I2C_8 */ - s5p_gpio_direction_output(&gpio1->f1, 4, 1); - s5p_gpio_direction_output(&gpio1->f1, 5, 1); + gpio_request(EXYNOS4X12_GPIO_F14, "i2c8_clk"); + gpio_request(EXYNOS4X12_GPIO_F15, "i2c8_data"); + gpio_direction_output(EXYNOS4X12_GPIO_F14, 1); + gpio_direction_output(EXYNOS4X12_GPIO_F15, 1); /* I2C_9 */ - s5p_gpio_direction_output(&gpio2->m2, 1, 1); - s5p_gpio_direction_output(&gpio2->m2, 0, 1); + gpio_request(EXYNOS4X12_GPIO_M21, "i2c9_clk"); + gpio_request(EXYNOS4X12_GPIO_M20, "i2c9_data"); + gpio_direction_output(EXYNOS4X12_GPIO_M21, 1); + gpio_direction_output(EXYNOS4X12_GPIO_M20, 1); } #endif @@ -141,47 +130,51 @@ static void board_init_i2c(void) int get_soft_i2c_scl_pin(void) { if (I2C_ADAP_HWNR) - return exynos4x12_gpio_part2_get_nr(m2, 1); /* I2C9 */ + return EXYNOS4X12_GPIO_M21; /* I2C9 */ else - return exynos4x12_gpio_part1_get_nr(f1, 4); /* I2C8 */ + return EXYNOS4X12_GPIO_F14; /* I2C8 */ } int get_soft_i2c_sda_pin(void) { if (I2C_ADAP_HWNR) - return exynos4x12_gpio_part2_get_nr(m2, 0); /* I2C9 */ + return EXYNOS4X12_GPIO_M20; /* I2C9 */ else - return exynos4x12_gpio_part1_get_nr(f1, 5); /* I2C8 */ + return EXYNOS4X12_GPIO_F15; /* I2C8 */ } #endif -int board_early_init_f(void) +int exynos_early_init_f(void) { - check_hw_revision(); board_external_gpio_init(); - gd->flags |= GD_FLG_DISABLE_CONSOLE; - return 0; } static int pmic_init_max77686(void); -int board_init(void) +int exynos_init(void) { struct exynos4_power *pwr = - (struct exynos4_power *)EXYNOS4X12_POWER_BASE; + (struct exynos4_power *)samsung_get_base_power(); - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + check_hw_revision(); + printf("HW Revision:\t0x%04x\n", board_rev); - /* workaround: clear INFORM4..5 */ - writel(0, (unsigned int)&pwr->inform4); - writel(0, (unsigned int)&pwr->inform5); + /* + * First bootloader on the TRATS2 platform uses + * INFORM4 and INFORM5 registers for recovery + * + * To indicate correct boot chain - those two + * registers must be cleared out + */ + writel(0, &pwr->inform4); + writel(0, &pwr->inform5); return 0; } -int power_init_board(void) +int exynos_power_init(void) { int chrg; struct power_battery *pb; @@ -192,9 +185,9 @@ int power_init_board(void) #endif pmic_init(I2C_7); /* I2C adapter 7 - bus name s3c24x0_7 */ pmic_init_max77686(); - pmic_init_max77693(I2C_9); /* I2C adapter 9 - bus name soft1 */ - power_muic_init(I2C_9); /* I2C adapter 9 - bus name soft1 */ - power_fg_init(I2C_8); /* I2C adapter 8 - bus name soft0 */ + pmic_init_max77693(I2C_10); /* I2C adapter 10 - bus name soft1 */ + power_muic_init(I2C_10); /* I2C adapter 10 - bus name soft1 */ + power_fg_init(I2C_9); /* I2C adapter 9 - bus name soft0 */ power_bat_init(0); p_chrg = pmic_get("MAX77693_PMIC"); @@ -236,7 +229,7 @@ int power_init_board(void) if (!p_chrg->chrg->chrg_bat_present(p_chrg)) { puts("No battery detected\n"); - return -1; + return 0; } p_fg->fg->fg_battery_check(p_fg, p_bat); @@ -247,90 +240,93 @@ int power_init_board(void) return 0; } -int dram_init(void) +#ifdef CONFIG_USB_GADGET +static int s5pc210_phy_control(int on) { - u32 size_mb; + int ret = 0; + unsigned int val; + struct pmic *p, *p_pmic, *p_muic; - size_mb = (get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + - get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) + - get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) + - get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)) >> 20; + p_pmic = pmic_get("MAX77686_PMIC"); + if (!p_pmic) + return -ENODEV; - gd->ram_size = size_mb << 20; + if (pmic_probe(p_pmic)) + return -1; - return 0; -} + p_muic = pmic_get("MAX77693_MUIC"); + if (!p_muic) + return -ENODEV; -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; -} + if (pmic_probe(p_muic)) + return -1; -int board_mmc_init(bd_t *bis) -{ - int err0, err2 = 0; + if (on) { + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON); + if (ret) + return -1; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + p = pmic_get("MAX77693_PMIC"); + if (!p) + return -ENODEV; - /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */ - s5p_gpio_direction_output(&gpio2->k0, 2, 1); - s5p_gpio_set_pull(&gpio2->k0, 2, GPIO_PULL_NONE); + if (pmic_probe(p)) + return -1; - /* - * eMMC GPIO: - * SDR 8-bit@48MHz at MMC0 - * GPK0[0] SD_0_CLK(2) - * GPK0[1] SD_0_CMD(2) - * GPK0[2] SD_0_CDn -> Not used - * GPK0[3:6] SD_0_DATA[0:3](2) - * GPK1[3:6] SD_0_DATA[0:3](3) - * - * DDR 4-bit@26MHz at MMC4 - * GPK0[0] SD_4_CLK(3) - * GPK0[1] SD_4_CMD(3) - * GPK0[2] SD_4_CDn -> Not used - * GPK0[3:6] SD_4_DATA[0:3](3) - * GPK1[3:6] SD_4_DATA[4:7](4) - */ + /* SAFEOUT */ + ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val); + if (ret) + return -1; - err0 = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); + val |= MAX77693_ENSAFEOUT1; + ret = pmic_reg_write(p, MAX77693_SAFEOUT, val); + if (ret) + return -1; - /* - * MMC device init - * mmc0 : eMMC (8-bit buswidth) - * mmc2 : SD card (4-bit buswidth) - */ - if (err0) - debug("SDMMC0 not configured\n"); - else - err0 = s5p_mmc_init(0, 8); + /* PATH: USB */ + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, + MAX77693_MUIC_CTRL1_DN1DP2); - /* T-flash detect */ - s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf); - s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP); + } else { + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM); + if (ret) + return -1; - /* - * Check the T-flash detect pin - * GPX3[4] T-flash detect pin - */ - if (!s5p_gpio_get_value(&gpio2->x3, 4)) { - err2 = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); - if (err2) - debug("SDMMC2 not configured\n"); - else - err2 = s5p_mmc_init(2, 4); + /* PATH: UART */ + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, + MAX77693_MUIC_CTRL1_UT1UR2); } - return err0 & err2; + if (ret) + return -1; + + return 0; } +struct dwc2_plat_otg_data s5pc210_otg_data = { + .phy_control = s5pc210_phy_control, + .regs_phy = EXYNOS4X12_USBPHY_BASE, + .regs_otg = EXYNOS4X12_USBOTG_BASE, + .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, + .usb_flags = PHY0_SLEEP, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + debug("USB_udc_probe\n"); + return dwc2_udc_probe(&s5pc210_otg_data); +} + +int g_dnl_board_usb_cable_connected(void) +{ + struct pmic *muic = pmic_get("MAX77693_MUIC"); + if (!muic) + return 0; + + return !!muic->chrg->chrg_type(muic); +} +#endif + static int pmic_init_max77686(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); @@ -389,46 +385,7 @@ static int pmic_init_max77686(void) */ #ifdef CONFIG_LCD -static struct mipi_dsim_config dsim_config = { - .e_interface = DSIM_VIDEO, - .e_virtual_ch = DSIM_VIRTUAL_CH_0, - .e_pixel_format = DSIM_24BPP_888, - .e_burst_mode = DSIM_BURST_SYNC_EVENT, - .e_no_data_lane = DSIM_DATA_LANE_4, - .e_byte_clk = DSIM_PLL_OUT_DIV8, - .hfp = 1, - - .p = 3, - .m = 120, - .s = 1, - - /* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */ - .pll_stable_time = 500, - - /* escape clk : 10MHz */ - .esc_clk = 20 * 1000000, - - /* stop state holding counter after bta change count 0 ~ 0xfff */ - .stop_holding_cnt = 0x7ff, - /* bta timeout 0 ~ 0xff */ - .bta_timeout = 0xff, - /* lp rx timeout 0 ~ 0xffff */ - .rx_timeout = 0xffff, -}; - -static struct exynos_platform_mipi_dsim dsim_platform_data = { - .lcd_panel_info = NULL, - .dsim_config = &dsim_config, -}; - -static struct mipi_dsim_lcd_device mipi_lcd_device = { - .name = "s6e8ax0", - .id = -1, - .bus_id = 0, - .platform_data = (void *)&dsim_platform_data, -}; - -static int mipi_power(void) +int mipi_power(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); @@ -444,11 +401,10 @@ void exynos_lcd_power_on(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; - /* LCD_2.2V_EN: GPC0[1] */ - s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP); - s5p_gpio_direction_output(&gpio1->c0, 1, 1); + gpio_request(EXYNOS4X12_GPIO_C01, "lcd_2v2_en"); + gpio_set_pull(EXYNOS4X12_GPIO_C01, S5P_GPIO_PULL_UP); + gpio_direction_output(EXYNOS4X12_GPIO_C01, 1); /* LDO25 VCC_3.1V_LCD */ pmic_probe(p); @@ -458,79 +414,20 @@ void exynos_lcd_power_on(void) void exynos_reset_lcd(void) { - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; - /* reset lcd */ - s5p_gpio_direction_output(&gpio1->f2, 1, 0); + gpio_request(EXYNOS4X12_GPIO_F21, "lcd_reset"); + gpio_direction_output(EXYNOS4X12_GPIO_F21, 0); udelay(10); - s5p_gpio_set_value(&gpio1->f2, 1, 1); + gpio_set_value(EXYNOS4X12_GPIO_F21, 1); } -vidinfo_t panel_info = { - .vl_freq = 60, - .vl_col = 720, - .vl_row = 1280, - .vl_width = 720, - .vl_height = 1280, - .vl_clkp = CONFIG_SYS_HIGH, - .vl_hsp = CONFIG_SYS_LOW, - .vl_vsp = CONFIG_SYS_LOW, - .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ - - /* s6e8ax0 Panel infomation */ - .vl_hspw = 5, - .vl_hbpd = 10, - .vl_hfpd = 10, - - .vl_vspw = 2, - .vl_vbpd = 1, - .vl_vfpd = 13, - .vl_cmd_allow_len = 0xf, - .mipi_enabled = 1, - - .dual_lcd_enabled = 0, - - .init_delay = 0, - .power_on_delay = 25, - .reset_delay = 0, - .interface_mode = FIMD_RGB_INTERFACE, -}; - -void init_panel_info(vidinfo_t *vid) +void exynos_lcd_misc_init(vidinfo_t *vid) { - vid->logo_on = 1; - vid->resolution = HD_RESOLUTION; - vid->rgb_mode = MODE_RGB_P; - - vid->power_on_delay = 30; - - mipi_lcd_device.reverse_panel = 1; - #ifdef CONFIG_TIZEN get_tizen_logo_info(vid); #endif - - strcpy(dsim_platform_data.lcd_panel_name, mipi_lcd_device.name); - dsim_platform_data.mipi_power = mipi_power; - dsim_platform_data.phy_enable = set_mipi_phy_ctrl; - dsim_platform_data.lcd_panel_info = (void *)vid; - exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device); - +#ifdef CONFIG_S6E8AX0 s6e8ax0_init(); - - exynos_set_dsim_platform_data(&dsim_platform_data); +#endif } #endif /* LCD */ - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - setenv("model", "GT-I8800"); - setenv("board", "TRATS2"); - - show_hw_revision(); - - return 0; -} -#endif