X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fsamsung%2Fsmdk2400%2Fsmdk2400.c;h=895bd7789ab8fc5d0a50dd742dc4ce25ed4c0162;hb=d963e84c92a63b4e6c4f2f80482a5ecbe9b24fe0;hp=4d1f1a63cd3a711833bc79d9e795ca4095260ea2;hpb=ea393eb1d6a786fc2e895f90abb5f7e7541aef45;p=oweals%2Fu-boot.git

diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
index 4d1f1a63cd..895bd7789a 100644
--- a/board/samsung/smdk2400/smdk2400.c
+++ b/board/samsung/smdk2400/smdk2400.c
@@ -4,7 +4,7 @@
  * Marius Groeger <mgroeger@sysgo.de>
  *
  * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -26,7 +26,8 @@
  */
 
 #include <common.h>
-#include <s3c2400.h>
+#include <netdev.h>
+#include <asm/arch/s3c24x0_cpu.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -45,35 +46,36 @@ extern int do_mdm_init; /* defined in common/main.c */
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* memory and cpu-speed are setup before relocation */
 	/* change the clock to be 50 MHz 1:1:1 */
-	clk_power->MPLLCON = 0x5c042;
-	clk_power->CLKDIVN = 0;
+	clk_power->mpllcon = 0x5c042;
+	clk_power->clkdivn = 0;
 	/* set up the I/O ports */
-	gpio->PACON = 0x3ffff;
-	gpio->PBCON = 0xaaaaaaaa;
-	gpio->PBUP = 0xffff;
-	gpio->PECON = 0x0;
-	gpio->PEUP = 0x0;
+	gpio->pacon = 0x3ffff;
+	gpio->pbcon = 0xaaaaaaaa;
+	gpio->pbup = 0xffff;
+	gpio->pecon = 0x0;
+	gpio->peup = 0x0;
 #ifdef CONFIG_HWFLOW
 	/*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
 	/*   10,   10,   00,   00,    10,   00,    10 */
-	gpio->PFCON=0xa22;
+	gpio->pfcon = 0xa22;
 	/* Disable pull-up on Rx, Tx, CTS and RTS pins */
-	gpio->PFUP=0x35;
+	gpio->pfup = 0x35;
 #else
 	/*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
 	/*   00,   00,   00,   00,    10,   00,    10 */
-	gpio->PFCON = 0x22;
+	gpio->pfcon = 0x22;
 	/* Disable pull-up on Rx and Tx pins */
-	gpio->PFUP = 0x5;
+	gpio->pfup = 0x5;
 #endif	/* CONFIG_HWFLOW */
-	gpio->PGCON = 0x0;
-	gpio->PGUP = 0x0;
-	gpio->OPENCR = 0x0;
+	gpio->pgcon = 0x0;
+	gpio->pgup = 0x0;
+	gpio->opencr = 0x0;
 
 	/* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
 	gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
@@ -110,3 +112,14 @@ static int key_pressed(void)
 	return rc;
 }
 #endif	/* CONFIG_MODEM_SUPPORT */
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_CS8900
+	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
+#endif
+	return rc;
+}
+#endif