X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fronetix%2Fpm9261%2Fpm9261.c;h=b96f745773128d9aa4a619deb42e24065468b7e4;hb=c9bb942e2f91d9f8e5f25ed1961eba2d64f65b8d;hp=b26e33a65f4f351d986ac2d910f6172ada90c9e9;hpb=f9342e2c3e81d62e42393c0c1a8179c309ef3a20;p=oweals%2Fu-boot.git

diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index b26e33a65f..b96f745773 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -1,32 +1,17 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
  * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -89,10 +74,10 @@ static void pm9261_nand_hw_init(void)
 		&pmc->pcer);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 
 	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* NANDOE */
 	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* NANDWE */
@@ -132,20 +117,20 @@ static void pm9261_dm9000_hw_init(void)
 
 #ifdef CONFIG_LCD
 vidinfo_t panel_info = {
-	vl_col:		240,
-	vl_row:		320,
-	vl_clk:		4965000,
-	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
-			ATMEL_LCDC_INVFRAME_INVERTED,
-	vl_bpix:	3,
-	vl_tft:		1,
-	vl_hsync_len:	5,
-	vl_left_margin:	1,
-	vl_right_margin:33,
-	vl_vsync_len:	1,
-	vl_upper_margin:1,
-	vl_lower_margin:0,
-	mmio:		ATMEL_BASE_LCDC,
+	.vl_col =		240,
+	.vl_row =		320,
+	.vl_clk =		4965000,
+	.vl_sync =		ATMEL_LCDC_INVLINE_INVERTED |
+				ATMEL_LCDC_INVFRAME_INVERTED,
+	.vl_bpix =		3,
+	.vl_tft =		1,
+	.vl_hsync_len =		5,
+	.vl_left_margin =	1,
+	.vl_right_margin =	33,
+	.vl_vsync_len =		1,
+	.vl_upper_margin =	1,
+	.vl_lower_margin =	0,
+	.mmio =			ATMEL_BASE_LCDC,
 };
 
 void lcd_enable(void)
@@ -237,21 +222,28 @@ void lcd_show_board_info(void)
 
 #endif /* CONFIG_LCD */
 
-int board_init(void)
+int board_early_init_f(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-	/* Enable Ctrlc */
-	console_init_f();
-
+	/* Enable clocks for some PIOs */
 	writel(1 << ATMEL_ID_PIOA |
 		1 << ATMEL_ID_PIOC,
 		&pmc->pcer);
 
+	at91_seriald_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of PM9261-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_PM9261;
+
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	pm9261_nand_hw_init();
 #endif
@@ -296,7 +288,7 @@ void reset_phy(void)
 	 * Initialize ethernet HW addr prior to starting Linux,
 	 * needed for nfsroot
 	 */
-	eth_init(gd->bd);
+	eth_init();
 #endif
 }
 #endif