X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fnetstal%2Fhcu5%2FREADME.txt;h=f64987637a883c1c1e2d4ccfb2a7bf6dbe7c4232;hb=1d96cfe8f5eebfc6ea39d1a387f35ca4499e6b67;hp=3118da9e06ef1a97d793c6a4ee2a70d7184c4536;hpb=3b3bff4cbf2cb14f9a3e7d03f26ebab900efe4ae;p=oweals%2Fu-boot.git

diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt
index 3118da9e06..f64987637a 100644
--- a/board/netstal/hcu5/README.txt
+++ b/board/netstal/hcu5/README.txt
@@ -10,9 +10,6 @@ TODO:
 - Fix RTS/CTS problem (HW?)
   CONFIG_SERIAL_MULTI/CONFIG_SERIAL_SOFTWARE_FIFO hangs after
   Switching to interrupt driven serial input mode
-- Make vxWorks start from u-boot. Possible reasons
-    - Does vxWorks need an entry for the Machine Check interrupt like this
-      tlbentry( 0x40000000, SZ_256M, 0, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) ?
 
 Caveats:
 --------
@@ -36,7 +33,7 @@ vector and start running.
 On-Chip Memory
 --------------
 
-0xe0010000- 0xe0013fff   CFG_OCM_BASE
+0xe0010000- 0xe0013fff   CONFIG_SYS_OCM_BASE
 The 440EPx includes a 16K on-chip memory that can be placed however
 software chooses.
 
@@ -152,10 +149,10 @@ From now on our copy is in RAM and we will run from there,
 	setup bd flash info
 	cpu_init_r: (cpu/ppc4xx/cpu_init.c)
 	    peripheral chip select in using defines like
-	    CFG_EBC_PB0A, CFG_EBC_PB0C from hcu5.h
+	    CONFIG_SYS_EBC_PB0A, CONFIG_SYS_EBC_PB0C from hcu5.h
 	mem_malloc_init
 	malloc_bin_reloc
-	spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+	spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 	env_relocated
 	misc_init_r(bd): (board/netstal/hcu5.c)
 	    ethaddr mit serial number ergänzen
@@ -171,4 +168,4 @@ include/ppc440.h
 Drivers for serial etc are found under drivers/
 
 Don't ask question if you did not look at the README !!
-Most CFG_* and CONFIG_* switches are mentioned/explained there.
+Most CONFIG_SYS_* and CONFIG_* switches are mentioned/explained there.