X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Flwmon%2Fpcmcia.c;h=ad2e60d590fe72b3657028e726f3678d7ced5806;hb=48f27919aa85c6f545d42093f389bd1d312d5744;hp=ebca7a2ca121f75a6f32f63e97d8190311755e75;hpb=d39b57415838c73fb0a37eca84de3c68ba990586;p=oweals%2Fu-boot.git

diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
index ebca7a2ca1..ad2e60d590 100644
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@@ -51,10 +51,10 @@ int pcmcia_hardware_enable(int slot)
 #endif
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	 * Configure SIUMCR to enable PCMCIA port B
@@ -108,8 +108,8 @@ int pcmcia_hardware_enable(int slot)
 
 	/*  switch VCC on */
 	val |= MAX1604_OP_SUS | MAX1604_VCCBON;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	udelay(500000);
 
@@ -137,13 +137,13 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* remove all power, put output in high impedance state */
 	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	/* Configure PCMCIA General Control Register */
 	debug ("Disable PCMCIA buffers and assert RESET\n");
@@ -181,8 +181,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	 * Disable PCMCIA buffers (isolate the interface)
 	 * and assert RESET signal
@@ -199,15 +199,15 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	 */
 	debug ("PCMCIA power OFF\n");
 	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	val = 0;
 	switch(vcc) {
-	case  0: 			break;
+	case  0:			break;
 	case 33: val = MAX1604_VCC_35;	break;
-	case 50: 			break;
-	default: 			goto done;
+	case 50:			break;
+	default:			goto done;
 	}
 
 	/* Checking supported voltages */
@@ -216,7 +216,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 		pcmp->pcmc_pipr,
 		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
 
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 	if (val) {
 		debug ("PCMCIA powered at %sV\n",
 			(val & MAX1604_VCC_35) ? "3.3" : "5.0");