X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fesd%2Fcpci2dp%2Fcpci2dp.c;h=ecfcf5923cece04d54f0f4f6a81f19de8ea67f32;hb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;hp=517b1740a43e6650210d5b7eae591cb3075d97d9;hpb=ea393eb1d6a786fc2e895f90abb5f7e7541aef45;p=oweals%2Fu-boot.git

diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 517b1740a4..ecfcf5923c 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
 #include <malloc.h>
 
@@ -30,18 +31,20 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * Setup GPIO pins
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg |
+	      ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED |
+		CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
 
 	/* set output pins to high */
-	out32(GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
+	out_be32((void *)GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
 	/* setup for output (LED=off) */
-	out32(GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
+	out_be32((void *)GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -55,21 +58,21 @@ int board_early_init_f (void)
 	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
 	 * IRQ 31 (EXT IRQ 6) unused
 	 */
-	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(uicer, 0x00000000);	/* disable all ints */
-	mtdcr(uiccr, 0x00000000);	/* set all to be non-critical*/
-	mtdcr(uicpr, 0xFFFFFF81);	/* set int polarities */
+	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
+	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical*/
+	mtdcr(UIC0PR, 0xFFFFFF81);	/* set int polarities */
 
-	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
-	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority*/
-	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
+	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority*/
+	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
 
 	return 0;
 }
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -78,8 +81,8 @@ int misc_init_r (void)
 	/*
 	 * Select cts (and not dsr) on uart1
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return (0);
 }
@@ -91,7 +94,7 @@ int misc_init_r (void)
 int checkboard (void)
 {
 	char str[64];
-	int i = getenv_r ("serial#", str, sizeof(str));
+	int i = getenv_f("serial#", str, sizeof(str));
 
 	puts ("Board: ");
 
@@ -124,17 +127,20 @@ int eeprom_write_enable (unsigned dev_addr, int state) {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
+			out_be32((void *)GPIO0_OR,
+				 in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+			out_be32((void *)GPIO0_OR,
+				 in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
+			state = (0 == (in_be32((void *)GPIO0_OR) &
+				       CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -143,7 +149,7 @@ int eeprom_write_enable (unsigned dev_addr, int state) {
 #endif
 
 #if defined(CONFIG_SYS_EEPROM_WREN)
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int query = argc == 1;
 	int state = 0;
@@ -177,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
 	eepwren,	2,	0,	do_eep_wren,
 	"Enable / disable / query EEPROM write access",
-	NULL
-	);
+	""
+);
 #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */