X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fesd%2Fcanbt%2Fcanbt.c;h=418d3e237edcee14762755adf27c1ac623f7670d;hb=297a65873d2cb2bd296253af51f59cc1391afbff;hp=30fa605abb62ae5bce1468f7bc7b299d60c752a3;hpb=1859e42fbf996e0e883cdb9829ef6d260bf4cdd6;p=oweals%2Fu-boot.git

diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c
index 30fa605abb..418d3e237e 100644
--- a/board/esd/canbt/canbt.c
+++ b/board/esd/canbt/canbt.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include "canbt.h"
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -51,16 +52,16 @@ const unsigned char fpgadata[] = {
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	int index, len, i;
 	int status;
 
 	/*
 	 * Setup GPIO pins
 	 */
-	cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff;
-	cntrl0Reg |= 0x0070f000;
-	mtdcr (cntrl0, cntrl0Reg);
+	CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff;
+	CPC0_CR0Reg |= 0x0070f000;
+	mtdcr (CPC0_CR0, CPC0_CR0Reg);
 
 #ifdef FPGA_DEBUG
 	/* set up serial port with default baudrate */
@@ -117,9 +118,9 @@ int board_early_init_f (void)
 	/*
 	 * Setup port pins for normal operation
 	 */
-	out32 (GPIO0_ODR, 0x00000000);	/* no open drain pins */
-	out32 (GPIO0_TCR, 0x07038100);	/* setup for output */
-	out32 (GPIO0_OR, 0x07030100);	/* set output pins to high (default) */
+	out_be32 ((void *)GPIO0_ODR, 0x00000000);	/* no open drain pins */
+	out_be32 ((void *)GPIO0_TCR, 0x07038100);	/* setup for output */
+	out_be32 ((void *)GPIO0_OR, 0x07030100);	/* set output pins to high (default) */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive