X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fesd%2Fash405%2Fash405.c;h=8a5b03bcedb3d35a8ac79e247028a2cb2f27dea8;hb=81735b2568cf634d601c0d4a1bbc3a3882bc8eda;hp=4cb5183232871aa0318a0447bc498075c6ee5185;hpb=e118e233a89ac021ffc69e8995638cc27feec99d;p=oweals%2Fu-boot.git

diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index 4cb5183232..8a5b03bced 100644
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -23,8 +23,8 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
-#include <cmd_boot.h>
 #include <malloc.h>
 
 /* ------------------------------------------------------------------------- */
@@ -33,6 +33,9 @@
 #define FPGA_DEBUG
 #endif
 
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern void lxt971_no_sleep(void);
+
 /* fpga configuration data - gzip compressed and generated by bin2c */
 const unsigned char fpgadata[] =
 {
@@ -46,10 +49,10 @@ const unsigned char fpgadata[] =
 
 
 /* Prototypes */
-int gunzip(void *, int, unsigned char *, int *);
+int gunzip(void *, int, unsigned char *, unsigned long *);
 
 
-int board_pre_init (void)
+int board_early_init_f (void)
 {
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -66,7 +69,7 @@ int board_pre_init (void)
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
 	mtdcr(uicer, 0x00000000);       /* disable all ints */
 	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+	mtdcr(uicpr, 0xFFFFFF9F);       /* set int polarities */
 	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
 	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
@@ -101,7 +104,7 @@ int misc_init_r (void)
 	int i;
 
 	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -163,17 +166,11 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
 	udelay(1000); /* wait 1ms */
 
-	/*
-	 * Set NAND-FLASH GPIO signals to default
-	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
-
 	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
@@ -192,7 +189,7 @@ int misc_init_r (void)
 
 int checkboard (void)
 {
-	unsigned char str[64];
+	char str[64];
 	int i = getenv_r ("serial#", str, sizeof(str));
 
 	puts ("Board: ");
@@ -217,36 +214,17 @@ long int initdram (int board_type)
 	mtdcr(memcfga, mem_mb0cf);
 	val = mfdcr(memcfgd);
 
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
 	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
 }
 
 /* ------------------------------------------------------------------------- */
 
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-#include <linux/mtd/nand.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
+void reset_phy(void)
 {
-	nand_probe(CFG_NAND_BASE);
-	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
-		puts("NAND:  ");
-		print_size(nand_dev_desc[0].totlen, "\n");
-	}
-}
+#ifdef CONFIG_LXT971_NO_SLEEP
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
 #endif
+}