X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fdelta%2Fdelta.c;h=a2942135fd33dddd2bd06c9bc6a43bda9c5a33d4;hb=81c0ebf623ddbb6a4da8e051441c83e99a01b00b;hp=b127ac8cab7b1e9b5569c3618cdfb6ad9362a177;hpb=e80e82cbb9995a622dcdc2d60a94d929814a700a;p=oweals%2Fu-boot.git

diff --git a/board/delta/delta.c b/board/delta/delta.c
index b127ac8cab..a2942135fd 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -1,10 +1,6 @@
 /*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2006
+ * DENX Software Engineering
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -26,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <i2c.h>
 #include <da9030.h>
 #include <malloc.h>
@@ -98,7 +95,6 @@ int board_late_init(void)
 	return 0;
 }
 
-
 /*
  * Magic Key Handling, mainly copied from board/lwmon/lwmon.c
  */
@@ -264,8 +260,8 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
 	   kbd,	1,	1,	do_kbd,
-	   "kbd     - read keyboard status\n",
-	   NULL
+	   "read keyboard status",
+	   ""
 );
 
 #endif /* DELTA_CHECK_KEYBD */
@@ -309,8 +305,8 @@ static void init_DA9030()
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 	GPSR0 = (1<<17);	/* drive GPIO17 high */
 
-#if CFG_DA9030_EXTON_DELAY
-	udelay((unsigned long) CFG_DA9030_EXTON_DELAY);	/* wait for DA9030 */
+#if CONFIG_SYS_DA9030_EXTON_DELAY
+	udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY);	/* wait for DA9030 */
 #endif
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 
@@ -324,6 +320,12 @@ static void init_DA9030()
 		return;
 	}
 
+	val = 0x80;
+	if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) {
+		printf("Error accessing DA9030 via i2c.\n");
+		return;
+	}
+
 	i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
 	i2c_reg_write(addr, LDO2_3, 0xd1);	/* LDO2 =1,9V, LDO3=3,1V */
 	i2c_reg_write(addr, LDO4_5, 0xcc);	/* LDO2 =1,9V, LDO3=3,1V */
@@ -362,3 +364,14 @@ void hw_watchdog_reset(void)
 	i2c_reg_write(addr, SYS_CONTROL_A, val);
 }
 #endif
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC91111
+	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+	return rc;
+}
+#endif