X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fbmw%2Fns16550.h;h=210aea4b2fd5791f44b562b246edc086ec4e1d7a;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=0b7b3896f9c4b4cbb97d0fe5e5d354d5f19030d7;hpb=8bde7f776c77b343aca29b8c7b58464d915ac245;p=oweals%2Fu-boot.git

diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
index 0b7b3896f9..210aea4b2f 100644
--- a/board/bmw/ns16550.h
+++ b/board/bmw/ns16550.h
@@ -2,7 +2,7 @@
  * NS16550 Serial Port
  * originally from linux source (arch/ppc/boot/ns16550.h)
  * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
  * added a few more definitions
  * added prototypes for ns16550.c
  * reduced no of com ports to 2
@@ -12,20 +12,19 @@
  */
 
 
-struct NS16550
- {
-  unsigned char rbrthrdlb;  /* 0 */
-  unsigned char ierdmb;     /* 1 */
-  unsigned char iirfcrafr;  /* 2 */
-  unsigned char lcr;         /* 3 */
-  unsigned char mcr;         /* 4 */
-  unsigned char lsr;         /* 5 */
-  unsigned char msr;         /* 6 */
-  unsigned char scr;         /* 7 */
-  unsigned char reserved[2]; /* 8 & 9 */
-  unsigned char dsr;         /* 10 */
-  unsigned char dcr;         /* 11 */
- };
+struct NS16550 {
+	unsigned char rbrthrdlb;	/* 0 */
+	unsigned char ierdmb;		/* 1 */
+	unsigned char iirfcrafr;	/* 2 */
+	unsigned char lcr;		/* 3 */
+	unsigned char mcr;		/* 4 */
+	unsigned char lsr;		/* 5 */
+	unsigned char msr;		/* 6 */
+	unsigned char scr;		/* 7 */
+	unsigned char reserved[2];	/* 8 & 9 */
+	unsigned char dsr;		/* 10 */
+	unsigned char dcr;		/* 11 */
+};
 
 
 #define rbr rbrthrdlb
@@ -37,44 +36,44 @@ struct NS16550
 #define fcr iirfcrafr
 #define afr iirfcrafr
 
-#define FCR_FIFO_EN     0x01    /*fifo enable*/
-#define FCR_RXSR        0x02    /*reciever soft reset*/
-#define FCR_TXSR        0x04    /*transmitter soft reset*/
-#define FCR_DMS		0x08    /* DMA Mode Select */
+#define FCR_FIFO_EN     0x01	/*fifo enable */
+#define FCR_RXSR        0x02	/*reciever soft reset */
+#define FCR_TXSR        0x04	/*transmitter soft reset */
+#define FCR_DMS		0x08	/* DMA Mode Select */
 
-#define MCR_RTS         0x02    /* Readyu to Send */
+#define MCR_RTS         0x02	/* Readyu to Send */
 #define MCR_LOOP	0x10	/* Local loopback mode enable */
 /* #define MCR_DTR         0x01    noton 8245 duart */
 /* #define MCR_DMA_EN      0x04    noton 8245 duart */
 /* #define MCR_TX_DFR      0x08    noton 8245 duart */
 
-#define LCR_WLS_MSK 0x03    /* character length slect mask*/
-#define LCR_WLS_5   0x00    /* 5 bit character length */
-#define LCR_WLS_6   0x01    /* 6 bit character length */
-#define LCR_WLS_7   0x02    /* 7 bit character length */
-#define LCR_WLS_8   0x03    /* 8 bit character length */
-#define LCR_STB     0x04    /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN     0x08    /* Parity eneble*/
-#define LCR_EPS     0x10    /* Even Parity Select*/
-#define LCR_STKP    0x20    /* Stick Parity*/
-#define LCR_SBRK    0x40    /* Set Break*/
-#define LCR_BKSE    0x80    /* Bank select enable - aka DLAB on 8245 */
+#define LCR_WLS_MSK 0x03	/* character length slect mask */
+#define LCR_WLS_5   0x00	/* 5 bit character length */
+#define LCR_WLS_6   0x01	/* 6 bit character length */
+#define LCR_WLS_7   0x02	/* 7 bit character length */
+#define LCR_WLS_8   0x03	/* 8 bit character length */
+#define LCR_STB     0x04	/* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define LCR_PEN     0x08	/* Parity eneble */
+#define LCR_EPS     0x10	/* Even Parity Select */
+#define LCR_STKP    0x20	/* Stick Parity */
+#define LCR_SBRK    0x40	/* Set Break */
+#define LCR_BKSE    0x80	/* Bank select enable - aka DLAB on 8245 */
 
-#define LSR_DR      0x01    /* Data ready */
-#define LSR_OE      0x02    /* Overrun */
-#define LSR_PE      0x04    /* Parity error */
-#define LSR_FE      0x08    /* Framing error */
-#define LSR_BI      0x10    /* Break */
-#define LSR_THRE    0x20    /* Xmit holding register empty */
-#define LSR_TEMT    0x40    /* Xmitter empty */
-#define LSR_ERR     0x80    /* Error */
+#define LSR_DR      0x01	/* Data ready */
+#define LSR_OE      0x02	/* Overrun */
+#define LSR_PE      0x04	/* Parity error */
+#define LSR_FE      0x08	/* Framing error */
+#define LSR_BI      0x10	/* Break */
+#define LSR_THRE    0x20	/* Xmit holding register empty */
+#define LSR_TEMT    0x40	/* Xmitter empty */
+#define LSR_ERR     0x80	/* Error */
 
 /* useful defaults for LCR*/
 #define LCR_8N1     0x03
 
 
-volatile struct NS16550 * NS16550_init(int chan, int baud_divisor);
-void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc(volatile struct NS16550 *com_port);
-int NS16550_tstc(volatile struct NS16550 *com_port);
-void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
+volatile struct NS16550 *NS16550_init (int chan, int baud_divisor);
+void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c);
+unsigned char NS16550_getc (volatile struct NS16550 *com_port);
+int NS16550_tstc (volatile struct NS16550 *com_port);
+void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor);