X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Fatmel%2Fatngw100%2Fatngw100.c;h=dacd4278314c5b3ed0c0c10a44f0c951da621e3c;hb=747c4c68c042babb2179b52b60bc78611e3e1183;hp=f2c3e79799616ea4cb6c7be67490ae235c14e80e;hpb=5f723a3b98c630bde33de74351f2121691fdef14;p=oweals%2Fu-boot.git diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index f2c3e79799..dacd427831 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -1,23 +1,7 @@ /* * Copyright (C) 2006 Atmel Corporation * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include @@ -26,9 +10,26 @@ #include #include #include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; +struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { + { + .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT, + .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT, + .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT) + | MMU_VMR_CACHE_NONE, + }, { + .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT, + .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT, + .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT) + | MMU_VMR_CACHE_WRBACK, + }, +}; + static const struct sdram_config sdram_config = { .data_bits = SDRAM_DATA_16BIT, .row_bits = 13, @@ -50,54 +51,46 @@ int board_early_init_f(void) /* Enable SDRAM in the EBI mux */ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); - gpio_enable_ebi(); - gpio_enable_usart1(); + portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH); + sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config); + + portmux_enable_usart1(PORTMUX_DRIVE_MIN); #if defined(CONFIG_MACB) - gpio_enable_macb0(); - gpio_enable_macb1(); + portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); + portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); #endif #if defined(CONFIG_MMC) - gpio_enable_mmci(); + portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); #endif #if defined(CONFIG_ATMEL_SPI) - gpio_enable_spi0(1 << 0); + portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW); #endif return 0; } -phys_size_t initdram(int board_type) +int board_early_init_r(void) { - unsigned long expected_size; - unsigned long actual_size; - void *sdram_base; - - sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); - - expected_size = sdram_init(sdram_base, &sdram_config); - actual_size = get_ram_size(sdram_base, expected_size); - - unmap_physmem(sdram_base, EBI_SDRAM_SIZE); - - if (expected_size != actual_size) - printf("Warning: Only %u of %u MiB SDRAM is working\n", - actual_size >> 20, expected_size >> 20); - - return actual_size; + gd->bd->bi_phy_id[0] = 0x01; + gd->bd->bi_phy_id[1] = 0x03; + return 0; } -void board_init_info(void) +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bi) { - gd->bd->bi_phy_id[0] = 0x01; - gd->bd->bi_phy_id[1] = 0x03; + macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]); + macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]); + return 0; } +#endif /* SPI chip select control */ #ifdef CONFIG_ATMEL_SPI #include -#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA3 +#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3) int spi_cs_is_valid(unsigned int bus, unsigned int cs) {