X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=board%2Faltera%2Fdk1c20%2Fdk1c20.c;fp=board%2Faltera%2Fdk1c20%2Fdk1c20.c;h=0000000000000000000000000000000000000000;hb=1117cbf2adac59050af1751af6c6a524afa5c3ef;hp=0bcaa4fd1470b2faa5bd52e579ba87150b51637d;hpb=6803336c9f21ba428f5c1b1cf825bbbac0a762e5;p=oweals%2Fu-boot.git

diff --git a/board/altera/dk1c20/dk1c20.c b/board/altera/dk1c20/dk1c20.c
deleted file mode 100644
index 0bcaa4fd14..0000000000
--- a/board/altera/dk1c20/dk1c20.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * CompactFlash/IDE:
- * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <nios-io.h>
-#if	defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#endif
-
-void _default_hdlr (void)
-{
-	printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if	defined(CONFIG_SEVENSEG)
-	/* init seven segment led display and switch off */
-	sevenseg_set(SEVENSEG_OFF);
-#endif
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("Board: Altera Nios 1C20 Development Kit\n");
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return (0);
-}
-
-#if defined(CONFIG_CMD_IDE)
-int ide_preinit (void)
-{
-	nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT;
-	nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER;
-	nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL;
-
-	/* setup data direction registers */
-	present->direction = NIOS_PIO_IN;
-	power->direction = NIOS_PIO_OUT;
-	atasel->direction = NIOS_PIO_OUT;
-
-	/* Check for presence of card */
-	if (present->data)
-		return 1;
-	printf ("Ok\n");
-
-	/* Finish setup */
-	power->data = 1;	/* Turn on power FET */
-	atasel->data = 0;	/* Put in ATA mode */
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif