X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Fx86%2Fcpu%2Fcpu.c;h=d108ee5c4e25538bc60314f19d03e83caf0837fc;hb=8c38e4d0b8d37dcd3bfd2293481e220b1b4a3a42;hp=02e66d80dbeefd27b440f5af2f12b0e1c251d7a8;hpb=ff6a8f3c06eab0f0afb65d5e5925eee9860f0add;p=oweals%2Fu-boot.git

diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 02e66d80db..d108ee5c4e 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -21,10 +21,13 @@
 
 #include <common.h>
 #include <command.h>
+#include <dm.h>
 #include <errno.h>
 #include <malloc.h>
 #include <asm/control_regs.h>
 #include <asm/cpu.h>
+#include <asm/lapic.h>
+#include <asm/mp.h>
 #include <asm/post.h>
 #include <asm/processor.h>
 #include <asm/processor-flags.h>
@@ -133,6 +136,7 @@ static void load_gdt(const u64 *boot_gdt, u16 num_entries)
 
 void setup_gdt(gd_t *id, u64 *gdt_addr)
 {
+	id->arch.gdt = gdt_addr;
 	/* CS: code, read/execute, 4 GB, base 0 */
 	gdt_addr[X86_GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff);
 
@@ -161,6 +165,26 @@ void setup_gdt(gd_t *id, u64 *gdt_addr)
 	load_fs(X86_GDT_ENTRY_32BIT_FS);
 }
 
+#ifdef CONFIG_HAVE_FSP
+/*
+ * Setup FSP execution environment GDT
+ *
+ * Per Intel FSP external architecture specification, before calling any FSP
+ * APIs, we need make sure the system is in flat 32-bit mode and both the code
+ * and data selectors should have full 4GB access range. Here we reuse the one
+ * we used in arch/x86/cpu/start16.S, and reload the segement registers.
+ */
+void setup_fsp_gdt(void)
+{
+	load_gdt((const u64 *)(gdt_rom + CONFIG_RESET_SEG_START), 4);
+	load_ds(X86_GDT_ENTRY_32BIT_DS);
+	load_ss(X86_GDT_ENTRY_32BIT_DS);
+	load_es(X86_GDT_ENTRY_32BIT_DS);
+	load_fs(X86_GDT_ENTRY_32BIT_DS);
+	load_gs(X86_GDT_ENTRY_32BIT_DS);
+}
+#endif
+
 int __weak x86_cleanup_before_linux(void)
 {
 #ifdef CONFIG_BOOTSTAGE_STASH
@@ -599,3 +623,48 @@ int last_stage_init(void)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_SMP
+static int enable_smis(struct udevice *cpu, void *unused)
+{
+	return 0;
+}
+
+static struct mp_flight_record mp_steps[] = {
+	MP_FR_BLOCK_APS(mp_init_cpu, NULL, mp_init_cpu, NULL),
+	/* Wait for APs to finish initialization before proceeding */
+	MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL),
+};
+
+static int x86_mp_init(void)
+{
+	struct mp_params mp_params;
+
+	mp_params.parallel_microcode_load = 0,
+	mp_params.flight_plan = &mp_steps[0];
+	mp_params.num_records = ARRAY_SIZE(mp_steps);
+	mp_params.microcode_pointer = 0;
+
+	if (mp_init(&mp_params)) {
+		printf("Warning: MP init failure\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+#endif
+
+__weak int x86_init_cpus(void)
+{
+#ifdef CONFIG_SMP
+	debug("Init additional CPUs\n");
+	x86_mp_init();
+#endif
+
+	return 0;
+}
+
+int cpu_init_r(void)
+{
+	return x86_init_cpus();
+}