X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fcpu%2Fmpc85xx%2Fu-boot-spl.lds;h=04951825d49d456a4f55817820066370235d022a;hb=de76610545f4350f8e3eac7c0c4ff6349106a9bf;hp=bc132673a51a73f8c8cac62440c35bdf685a104d;hpb=3be2bdf5dc69b3142c1162a59bc67191c9077567;p=oweals%2Fu-boot.git

diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index bc132673a5..04951825d4 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -1,13 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de
  *
  * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#include "config.h"	/* CONFIG_BOARDDIR */
+#include "config.h"
 
 OUTPUT_ARCH(powerpc)
 #ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
@@ -29,7 +28,6 @@ SECTIONS
 		_GOT2_TABLE_ = .;
 		KEEP(*(.got2))
 		KEEP(*(.got))
-		PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
 		_FIXUP_TABLE_ = .;
 		KEEP(*(.fixup))
 	}
@@ -57,29 +55,46 @@ SECTIONS
 	. = ALIGN(8);
 	__init_begin = .;
 	__init_end = .;
-/* FIXME for non-NAND SPL */
+#ifdef CONFIG_SPL_SKIP_RELOCATE
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : {
+		*(.sbss*)
+		*(.bss*)
+	}
+	. = ALIGN(4);
+	__bss_end = .;
+#endif
+
+/* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+	.bootpg ADDR(.text) - 0x1000 :
+	{
+		KEEP(*(.bootpg))
+	} :text = 0xffff
+#else
 #if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
-	.bootpg ADDR(.text) + 0x1000 :
+#ifndef BOOT_PAGE_OFFSET
+#define BOOT_PAGE_OFFSET 0x1000
+#endif
+	.bootpg ADDR(.text) + BOOT_PAGE_OFFSET :
 	{
 		arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
 	}
+#ifndef RESET_VECTOR_OFFSET
 #define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
+#endif
 #elif defined(CONFIG_FSL_ELBC)
 #define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
 #else
 #error unknown NAND controller
 #endif
-#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
-	.bootpg ADDR(.text) - 0x1000 :
-	{
-		KEEP(*(.bootpg))
-	} :text = 0xffff
-#else
 	.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
 		KEEP(*(.resetvec))
 	} = 0xffff
 #endif
 
+#ifndef CONFIG_SPL_SKIP_RELOCATE
 	/*
 	 * Make sure that the bss segment isn't linked at 0x0, otherwise its
 	 * address won't be updated during relocation fixups.
@@ -94,4 +109,5 @@ SECTIONS
 	}
 	. = ALIGN(4);
 	__bss_end = .;
+#endif
 }