X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fcpu%2Fmpc85xx%2Frelease.S;h=e1f12089c33e1139ee957f338d811ab38a0bc2db;hb=9925f1dbc38c0ef7220c6fca5968c708b8e48764;hp=6678ed4118c02403b129f7f49c00b96a29a2af3e;hpb=dd620b26332eb1e9fc0216760909c4046ba09745;p=oweals%2Fu-boot.git diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 6678ed4118..e1f12089c3 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -1,32 +1,13 @@ /* - * Copyright 2008-2011 Freescale Semiconductor, Inc. + * Copyright 2008-2012 Freescale Semiconductor, Inc. * Kumar Gala * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include -#include - -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include #include @@ -68,6 +49,39 @@ __secondary_start_page: mtspr SPRN_HID1,r3 #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 + mfspr r3,SPRN_HDBCR1 + oris r3,r3,0x0100 + mtspr SPRN_HDBCR1,r3 +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004510 + mfspr r3,SPRN_SVR + rlwinm r3,r3,0,0xff + li r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV + cmpw r3,r4 + beq 1f + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 + li r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 + cmpw r3,r4 + beq 1f +#endif + + /* Not a supported revision affected by erratum */ + b 2f + +1: /* Erratum says set bits 55:60 to 001001 */ + msync + isync + mfspr r3,SPRN_HDBCR0 + li r4,0x48 + rlwimi r3,r4,0,0x1f8 + mtspr SPRN_HDBCR0,r3 + isync +2: +#endif + /* Enable branch prediction */ lis r3,BUCSR_ENABLE@h ori r3,r3,BUCSR_ENABLE@l @@ -117,43 +131,127 @@ __secondary_start_page: #define toreset(x) (x - __secondary_start_page + 0xfffff000) /* get our PIR to figure out our table entry */ - lis r3,toreset(__spin_table)@h - ori r3,r3,toreset(__spin_table)@l + lis r3,toreset(__spin_table_addr)@h + ori r3,r3,toreset(__spin_table_addr)@l + lwz r3,0(r3) - /* r10 has the base address for the entry */ mfspr r0,SPRN_PIR -#ifdef CONFIG_E500MC +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +/* + * PIR definition for Chassis 2 + * 0-17 Reserved (logic 0s) + * 18-19 CHIP_ID, 2'b00 - SoC 1 + * all others - reserved + * 20-24 CLUSTER_ID 5'b00000 - CCM 1 + * all others - reserved + * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1 + * 2'b01 - cluster 2 + * 2'b10 - cluster 3 + * 2'b11 - cluster 4 + * 27-28 CORE_ID 2'b00 - core 0 + * 2'b01 - core 1 + * 2'b10 - core 2 + * 2'b11 - core 3 + * 29-31 THREAD_ID 3'b000 - thread 0 + * 3'b001 - thread 1 + * + * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08 + * and clusters by 0x20. + * + * We renumber PIR so that all threads in the system are consecutive. + */ + + rlwinm r8,r0,29,0x03 /* r8 = core within cluster */ + srwi r10,r0,5 /* r10 = cluster */ + + mulli r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER + add r5,r5,r8 /* for spin table index */ + mulli r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE /* for PIR */ +#elif defined(CONFIG_E500MC) rlwinm r4,r0,27,27,31 + mr r5,r4 #else mr r4,r0 + mr r5,r4 #endif - slwi r8,r4,5 + + /* + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB + */ + slwi r8,r5,6 /* spin table is padded to 64 byte */ add r10,r3,r8 -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) + mtspr SPRN_PIR,r4 /* write to PIR register */ + +#ifdef CONFIG_SYS_FSL_ERRATUM_A007907 + mfspr r8, L1CSR2 + clrrwi r8, r8, 10 /* clear bit [54-63] DCSTASHID */ + mtspr L1CSR2, r8 +#else +#ifdef CONFIG_SYS_CACHE_STASHING /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ slwi r8,r4,1 addi r8,r8,32 mtspr L1CSR2,r8 #endif +#endif /* CONFIG_SYS_FSL_ERRATUM_A007907 */ -#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) - mfspr r8,L1CSR2 - oris r8,r8,(L1CSR2_DCWS)@h - mtspr L1CSR2,r8 +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ + defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) + /* + * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0 + * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0 + * also appleis to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1 + */ + mfspr r3,SPRN_SVR + rlwinm r6,r3,24,~0x800 /* clear E bit */ + + lis r5,SVR_P4080@h + ori r5,r5,SVR_P4080@l + cmpw r6,r5 + bne 1f + + rlwinm r3,r3,0,0xf0 + li r5,0x30 + cmpw r3,r5 + bge 2f +1: +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 + lis r3,toreset(enable_cpu_a011_workaround)@ha + lwz r3,toreset(enable_cpu_a011_workaround)@l(r3) + cmpwi r3,0 + beq 2f +#endif + mfspr r3,L1CSR2 + oris r3,r3,(L1CSR2_DCWS)@h + mtspr L1CSR2,r3 +2: +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in + * write shadow mode. This code should run after other code setting + * DCWS. + */ + mfspr r3,L1CSR2 + andis. r3,r3,(L1CSR2_DCWS)@h + beq 1f + mfspr r3, SPRN_HDBCR0 + oris r3, r3, 0x8000 + mtspr SPRN_HDBCR0, r3 +1: #endif #ifdef CONFIG_BACKSIDE_L2_CACHE /* skip L2 setup on P2040/P2040E as they have no L2 */ - mfspr r2,SPRN_SVR + mfspr r3,SPRN_SVR + rlwinm r6,r3,24,~0x800 /* clear E bit of SVR */ + lis r3,SVR_P2040@h ori r3,r3,SVR_P2040@l - cmpw r2,r3 - beq 3f - - lis r3,SVR_P2040_E@h - ori r3,r3,SVR_P2040_E@l - cmpw r2,r3 + cmpw r6,r3 beq 3f /* Enable/invalidate the L2 cache */ @@ -182,78 +280,136 @@ __secondary_start_page: beq 2b #endif 3: - -#define EPAPR_MAGIC (0x45504150) -#define ENTRY_ADDR_UPPER 0 -#define ENTRY_ADDR_LOWER 4 -#define ENTRY_R3_UPPER 8 -#define ENTRY_R3_LOWER 12 -#define ENTRY_RESV 16 -#define ENTRY_PIR 20 -#define ENTRY_R6_UPPER 24 -#define ENTRY_R6_LOWER 28 -#define ENTRY_SIZE 32 - - /* setup the entry */ - li r3,0 - li r8,1 - stw r0,ENTRY_PIR(r10) - stw r3,ENTRY_ADDR_UPPER(r10) - stw r8,ENTRY_ADDR_LOWER(r10) - stw r3,ENTRY_R3_UPPER(r10) - stw r4,ENTRY_R3_LOWER(r10) - stw r3,ENTRY_R6_UPPER(r10) - stw r3,ENTRY_R6_LOWER(r10) - - /* load r13 with the address of the 'bootpg' in SDRAM */ - lis r13,toreset(__bootpg_addr)@h - ori r13,r13,toreset(__bootpg_addr)@l + /* setup mapping for the spin table, WIMGE=0b00100 */ + lis r13,toreset(__spin_table_addr)@h + ori r13,r13,toreset(__spin_table_addr)@l lwz r13,0(r13) + /* mask by 4K */ + rlwinm r13,r13,0,0,19 - /* setup mapping for AS = 1, and jump there */ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h mtspr SPRN_MAS0,r11 lis r11,(MAS1_VALID|MAS1_IPROT)@h ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r11 - oris r11,r13,(MAS2_I|MAS2_G)@h - ori r11,r13,(MAS2_I|MAS2_G)@l + oris r11,r13,(MAS2_M|MAS2_G)@h + ori r11,r13,(MAS2_M|MAS2_G)@l mtspr SPRN_MAS2,r11 oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l mtspr SPRN_MAS3,r11 + li r11,0 + mtspr SPRN_MAS7,r11 tlbwe - bl 1f -1: mflr r11 /* - * OR in 0xfff to create a mask of the bootpg SDRAM address. We use - * this mask to fixup the cpu spin table and the address that we want - * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the - * bootpg is at 0x7ffff000 in SDRAM. + * __bootpg_addr has the address of __second_half_boot_page + * jump there in AS=1 space with cache enabled */ - ori r13,r13,0xfff - and r11, r11, r13 - and r10, r10, r13 - - addi r11,r11,(2f-1b) + lis r13,toreset(__bootpg_addr)@h + ori r13,r13,toreset(__bootpg_addr)@l + lwz r11,0(r13) + mtspr SPRN_SRR0,r11 mfmsr r13 ori r12,r13,MSR_IS|MSR_DS@l - - mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 rfi + /* + * Allocate some space for the SDRAM address of the bootpg. + * This variable has to be in the boot page so that it can + * be accessed by secondary cores when they come out of reset. + */ + .align L1_CACHE_SHIFT + .globl __bootpg_addr +__bootpg_addr: + .long 0 + + .global __spin_table_addr +__spin_table_addr: + .long 0 + + /* + * This variable is set by cpu_init_r() after parsing hwconfig + * to enable workaround for erratum NMG_CPU_A011. + */ + .align L1_CACHE_SHIFT + .global enable_cpu_a011_workaround +enable_cpu_a011_workaround: + .long 1 + + /* Fill in the empty space. The actual reset vector is + * the last word of the page */ +__secondary_start_code_end: + .space 4092 - (__secondary_start_code_end - __secondary_start_page) +__secondary_reset_vector: + b __secondary_start_page + + +/* this is a separated page for the spin table and cacheable boot code */ + .align L1_CACHE_SHIFT + .global __second_half_boot_page +__second_half_boot_page: +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + lis r3,(spin_table_compat - __second_half_boot_page)@h + ori r3,r3,(spin_table_compat - __second_half_boot_page)@l + add r3,r3,r11 /* r11 has the address of __second_half_boot_page */ + lwz r14,0(r3) +#endif + +#define ENTRY_ADDR_UPPER 0 +#define ENTRY_ADDR_LOWER 4 +#define ENTRY_R3_UPPER 8 +#define ENTRY_R3_LOWER 12 +#define ENTRY_RESV 16 +#define ENTRY_PIR 20 +#define ENTRY_SIZE 64 + /* + * setup the entry + * r10 has the base address of the spin table. + * spin table is defined as + * struct { + * uint64_t entry_addr; + * uint64_t r3; + * uint32_t rsvd1; + * uint32_t pir; + * }; + * we pad this struct to 64 bytes so each entry is in its own cacheline + */ + li r3,0 + li r8,1 + mfspr r4,SPRN_PIR + stw r3,ENTRY_ADDR_UPPER(r10) + stw r3,ENTRY_R3_UPPER(r10) + stw r4,ENTRY_R3_LOWER(r10) + stw r3,ENTRY_RESV(r10) + stw r4,ENTRY_PIR(r10) + msync + stw r8,ENTRY_ADDR_LOWER(r10) + /* spin waiting for addr */ -2: +3: +/* + * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled + * memory. Old OS may not work with this change. A patch is waiting to be + * accepted for Linux kernel. Other OS needs similar fix to spin table. + * For OSes with old spin table code, we can enable this temporary fix by + * setting environmental variable "spin_table_compat". For new OSes, set + * "spin_table_compat=no". After Linux is fixed, we can remove this macro + * and related code. For now, it is enabled by default. + */ +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + cmpwi r14,0 + beq 4f + dcbf 0, r10 + sync +4: +#endif lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 - bne 2b + bne 3b isync - /* setup IVORs to match fixed offsets */ -#include "fixed_ivor.S" - /* get the upper bits of the addr */ lwz r11,ENTRY_ADDR_UPPER(r10) @@ -267,11 +423,20 @@ __secondary_start_page: /* mask by ~64M to setup our tlb we will jump to */ rlwinm r12,r4,0,0,5 - /* setup r3, r4, r5, r6, r7, r8, r9 */ + /* + * setup r3, r4, r5, r6, r7, r8, r9 + * r3 contains the value to put in the r3 register at secondary cpu + * entry. The high 32-bits are ignored on 32-bit chip implementations. + * 64-bit chip implementations however shall load all 64-bits + */ +#ifdef CONFIG_SYS_PPC64 + ld r3,ENTRY_R3_UPPER(r10) +#else lwz r3,ENTRY_R3_LOWER(r10) +#endif li r4,0 li r5,0 - lwz r6,ENTRY_R6_LOWER(r10) + li r6,0 lis r7,(64*1024*1024)@h li r8,0 li r9,0 @@ -309,23 +474,19 @@ __secondary_start_page: mtspr SPRN_SRR1,r13 rfi - /* - * Allocate some space for the SDRAM address of the bootpg. - * This variable has to be in the boot page so that it can - * be accessed by secondary cores when they come out of reset. - */ - .globl __bootpg_addr -__bootpg_addr: - .long 0 - .align L1_CACHE_SHIFT + .align 6 .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE - /* Fill in the empty space. The actual reset vector is - * the last word of the page */ -__secondary_start_code_end: - .space 4092 - (__secondary_start_code_end - __secondary_start_page) -__secondary_reset_vector: - b __secondary_start_page +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + .align L1_CACHE_SHIFT + .global spin_table_compat +spin_table_compat: + .long 1 + +#endif + +__spin_table_end: + .space 4096 - (__spin_table_end - __spin_table)