X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fcpu%2Fmpc512x%2Fiopin.c;h=0b53c7b98e93b1f34e6700d9b0bd33866957fdc8;hb=a7a97fddb390b998449264a005ce32a95dfd068b;hp=be209476232603c33968a77621774a82fb0e8a1d;hpb=a47a12becf66f02a56da91c161e2edb625e9f20c;p=oweals%2Fu-boot.git

diff --git a/arch/powerpc/cpu/mpc512x/iopin.c b/arch/powerpc/cpu/mpc512x/iopin.c
index be20947623..0b53c7b98e 100644
--- a/arch/powerpc/cpu/mpc512x/iopin.c
+++ b/arch/powerpc/cpu/mpc512x/iopin.c
@@ -2,23 +2,7 @@
  * (C) Copyright 2008
  * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
  * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -47,3 +31,57 @@ void iopin_initialize(iopin_t *ioregs_init, int len)
 	}
 	return;
 }
+
+void iopin_initialize_bits(iopin_t *ioregs_init, int len)
+{
+	short i, j, p;
+	u32 *reg, mask;
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+	reg = (u32 *)&(im->io_ctrl);
+
+	/* iterate over table entries */
+	for (i = 0; i < len; i++) {
+		/* iterate over pins within a table entry */
+		for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+			p < ioregs_init[i].nr_pins; p++, j++) {
+			if (ioregs_init[i].bit_or & IO_PIN_OVER_EACH) {
+				/* replace all settings at once */
+				out_be32(reg + j, ioregs_init[i].val);
+			} else {
+				/*
+				 * only replace individual parts, but
+				 * REPLACE them instead of just ORing
+				 * them in and "inheriting" previously
+				 * set bits which we don't want
+				 */
+				mask = 0;
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_FMUX)
+					mask |= IO_PIN_FMUX(3);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_HOLD)
+					mask |= IO_PIN_HOLD(3);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_PULL)
+					mask |= IO_PIN_PUD(1) | IO_PIN_PUE(1);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_STRIG)
+					mask |= IO_PIN_ST(1);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_DRVSTR)
+					mask |= IO_PIN_DS(3);
+				/*
+				 * DON'T do the "mask, then insert"
+				 * in place on the register, it may
+				 * break access to external hardware
+				 * (like boot ROMs) when configuring
+				 * LPB related pins, while the code to
+				 * configure the pin is read from this
+				 * very address region
+				 */
+				clrsetbits_be32(reg + j, mask,
+						ioregs_init[i].val & mask);
+			}
+		}
+	}
+}