X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Fblackfin%2Finclude%2Fasm%2Fconfig.h;h=1da386ea49cf789f688607971bdf6477e01a721f;hb=6853e6aa77b388998a5368b400aee3ae7776b1c2;hp=215e0f29183fbb51e0631b0d9c28d68a6e71e8fb;hpb=d6288664743cdd4824cb877ca424619c827c1256;p=oweals%2Fu-boot.git

diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index 215e0f2918..1da386ea49 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -9,12 +9,20 @@
 #ifndef __ASM_BLACKFIN_CONFIG_POST_H__
 #define __ASM_BLACKFIN_CONFIG_POST_H__
 
+/* Some of our defines use this (like CONFIG_SYS_GBL_DATA_ADDR) */
+#include <asm-offsets.h>
+
+/* Sanity check CONFIG_BFIN_CPU */
+#ifndef CONFIG_BFIN_CPU
+# error CONFIG_BFIN_CPU: your board config needs to define this
+#endif
+
 #ifndef CONFIG_BFIN_SCRATCH_REG
 # define CONFIG_BFIN_SCRATCH_REG retn
 #endif
 
-/* Relocation to SDRAM works on all Blackfin boards */
-#define CONFIG_RELOC_FIXUP_WORKS
+/* U-Boot wants this config name */
+#define CONFIG_SYS_CACHELINE_SIZE L1_CACHE_BYTES
 
 /* Make sure the structure is properly aligned */
 #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
@@ -101,14 +109,8 @@
 #ifndef CONFIG_SYS_MALLOC_BASE
 # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
 #endif
-#ifndef CONFIG_SYS_GBL_DATA_SIZE
-# define CONFIG_SYS_GBL_DATA_SIZE (128)
-#endif
-#ifndef CONFIG_SYS_GBL_DATA_ADDR
-# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#endif
 #ifndef CONFIG_STACKBASE
-# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4)
+# define CONFIG_STACKBASE (CONFIG_SYS_MALLOC_BASE - 4)
 #endif
 #ifndef CONFIG_SYS_MEMTEST_START
 # define CONFIG_SYS_MEMTEST_START 0
@@ -116,6 +118,9 @@
 #ifndef CONFIG_SYS_MEMTEST_END
 # define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4)
 #endif
+#ifndef CONFIG_SYS_POST_WORD_ADDR
+# define CONFIG_SYS_POST_WORD_ADDR (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE - 4)
+#endif
 
 /* Check to make sure everything fits in external RAM */
 #if CONFIG_SYS_MAX_RAM_SIZE && \
@@ -150,15 +155,23 @@
 #ifndef CONFIG_SYS_MAXARGS
 # define CONFIG_SYS_MAXARGS 16
 #endif
-#if defined(CONFIG_SYS_HZ)
-# if (CONFIG_SYS_HZ != 1000)
-#  warning "CONFIG_SYS_HZ must always be 1000"
-# endif
-# undef CONFIG_SYS_HZ
-#endif
-#define CONFIG_SYS_HZ 1000
-#ifndef CONFIG_SYS_BAUDRATE_TABLE
-# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Blackfin POST tests */
+#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
+# define CONFIG_POST_BSPEC1 \
+	{ \
+		"LED test", "led", "This test verifies LEDs on the board.", \
+		POST_MEM | POST_ALWAYS, &led_post_test, NULL, NULL, \
+		CONFIG_SYS_POST_BSPEC1, \
+	}
+#endif
+#ifdef CONFIG_POST_BSPEC2_GPIO_BUTTONS
+# define CONFIG_POST_BSPEC2 \
+	{ \
+		"Button test", "button", "This test verifies buttons on the board.", \
+		POST_MEM | POST_ALWAYS, &button_post_test, NULL, NULL, \
+		CONFIG_SYS_POST_BSPEC2, \
+	}
 #endif
 
 #endif