X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fmach-tegra%2Fboard.c;h=3d1d26d13d1399b38b1fadac66721a8bb4c08e2e;hb=ec1eaad06551e2422baf8743f6987d4f561f2ce6;hp=f16fe68a66492cfc3f9e605cdfa5789b0b8f1ef2;hpb=3a2cab512c0c4d96d8210e4f729dd080bbf8c90d;p=oweals%2Fu-boot.git diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index f16fe68a66..3d1d26d13d 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -1,21 +1,27 @@ /* - * (C) Copyright 2010-2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation * * SPDX-License-Identifier: GPL-2.0+ */ #include +#include +#include +#include #include #include #include #include #include +#include #include #include #include #include +void save_boot_params_ret(void); + DECLARE_GLOBAL_DATA_PTR; enum { @@ -28,11 +34,45 @@ enum { UART_COUNT = 5, }; +static bool from_spl __attribute__ ((section(".data"))); + +#ifndef CONFIG_SPL_BUILD +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) +{ + from_spl = r0 != UBOOT_NOT_LOADED_FROM_SPL; + save_boot_params_ret(); +} +#endif + +bool spl_was_boot_source(void) +{ + return from_spl; +} + +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) +#if !defined(CONFIG_TEGRA124) +#error tegra_cpu_is_non_secure has only been validated on Tegra124 +#endif +bool tegra_cpu_is_non_secure(void) +{ + /* + * This register reads 0xffffffff in non-secure mode. This register + * only implements bits 31:20, so the lower bits will always read 0 in + * secure mode. Thus, the lower bits are an indicator for secure vs. + * non-secure mode. + */ + struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE; + uint32_t mc_s_cfg0 = readl(&mc->mc_security_cfg0); + return (mc_s_cfg0 & 1) == 1; +} +#endif + /* Read the RAM size directly from the memory controller */ -unsigned int query_sdram_size(void) +static phys_size_t query_sdram_size(void) { struct mc_ctlr *const mc = (struct mc_ctlr *)NV_PA_MC_BASE; - u32 emem_cfg, size_bytes; + u32 emem_cfg; + phys_size_t size_bytes; emem_cfg = readl(&mc->mc_emem_cfg); #if defined(CONFIG_TEGRA20) @@ -40,7 +80,32 @@ unsigned int query_sdram_size(void) size_bytes = get_ram_size((void *)PHYS_SDRAM_1, emem_cfg * 1024); #else debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", emem_cfg); - size_bytes = get_ram_size((void *)PHYS_SDRAM_1, emem_cfg * 1024 * 1024); +#ifndef CONFIG_PHYS_64BIT + /* + * If >=4GB RAM is present, the byte RAM size won't fit into 32-bits + * and will wrap. Clip the reported size to the maximum that a 32-bit + * variable can represent (rounded to a page). + */ + if (emem_cfg >= 4096) { + size_bytes = U32_MAX & ~(0x1000 - 1); + } else +#endif + { + /* RAM size EMC is programmed to. */ + size_bytes = (phys_size_t)emem_cfg * 1024 * 1024; +#ifndef CONFIG_ARM64 + /* + * If all RAM fits within 32-bits, it can be accessed without + * LPAE, so go test the RAM size. Otherwise, we can't access + * all the RAM, and get_ram_size() would get confused, so + * avoid using it. There's no reason we should need this + * validation step anyway. + */ + if (emem_cfg <= (0 - PHYS_SDRAM_1) / (1024 * 1024)) + size_bytes = get_ram_size((void *)PHYS_SDRAM_1, + size_bytes); +#endif + } #endif #if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) @@ -59,14 +124,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_DISPLAY_BOARDINFO -int checkboard(void) -{ - printf("Board: %s\n", sysinfo.board_string); - return 0; -} -#endif /* CONFIG_DISPLAY_BOARDINFO */ - static int uart_configs[] = { #if defined(CONFIG_TEGRA20) #if defined(CONFIG_TEGRA_UARTA_UAA_UAB) @@ -94,12 +151,18 @@ static int uart_configs[] = { -1, FUNCMUX_UART4_GMI, /* UARTD */ -1, -#else /* Tegra124 */ +#elif defined(CONFIG_TEGRA124) FUNCMUX_UART1_KBC, /* UARTA */ -1, -1, FUNCMUX_UART4_GPIO, /* UARTD */ -1, +#else /* Tegra210 */ + FUNCMUX_UART1_UART1, /* UARTA */ + -1, + -1, + FUNCMUX_UART4_UART4, /* UARTD */ + -1, #endif }; @@ -151,7 +214,19 @@ void board_init_uart_f(void) setup_uarts(uart_ids); } -#ifndef CONFIG_SYS_DCACHE_OFF +#if !CONFIG_IS_ENABLED(OF_CONTROL) +static struct ns16550_platdata ns16550_com1_pdata = { + .base = CONFIG_SYS_NS16550_COM1, + .reg_shift = 2, + .clock = CONFIG_SYS_NS16550_CLK, +}; + +U_BOOT_DEVICE(ns16550_com1) = { + "ns16550_serial", &ns16550_com1_pdata +}; +#endif + +#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64) void enable_caches(void) { /* Enable D-cache. I-cache is already enabled in start.S */