X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Fomap_common.h;h=605c549f0a5a647b84874d7cd4ed108762c63cc5;hb=95d52733036af7438a5285d729d53844ec48c63e;hp=81f1616ec0669e1fbf222f13362bba91ffcfacca;hpb=ca5a0f172ebd907cfc21fe7c8744b0b1752bc66f;p=oweals%2Fu-boot.git

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 81f1616ec0..605c549f0a 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -145,6 +145,7 @@ struct prcm_regs {
 	u32 cm_ssc_modfreqdiv_dpll_unipro;
 	u32 cm_coreaon_usb_phy1_core_clkctrl;
 	u32 cm_coreaon_usb_phy2_core_clkctrl;
+	u32 cm_coreaon_usb_phy3_core_clkctrl;
 	u32 cm_coreaon_l3init_60m_gfclk_clkctrl;
 
 	/* cm2.core */
@@ -234,6 +235,7 @@ struct prcm_regs {
 	u32 cm_l3init_usb_otg_ss1_clkctrl;
 	u32 cm_l3init_usb_otg_ss2_clkctrl;
 
+	u32 prm_irqstatus_mpu;
 	u32 prm_irqstatus_mpu_2;
 
 	/* cm2.l4per */
@@ -321,6 +323,14 @@ struct prcm_regs {
 	u32 prm_vc_cfg_i2c_clk;
 	u32 prm_abbldo_mpu_setup;
 	u32 prm_abbldo_mpu_ctrl;
+	u32 prm_abbldo_mm_setup;
+	u32 prm_abbldo_mm_ctrl;
+	u32 prm_abbldo_iva_setup;
+	u32 prm_abbldo_iva_ctrl;
+	u32 prm_abbldo_eve_setup;
+	u32 prm_abbldo_eve_ctrl;
+	u32 prm_abbldo_gpu_setup;
+	u32 prm_abbldo_gpu_ctrl;
 
 	u32 cm_div_m4_dpll_core;
 	u32 cm_div_m5_dpll_core;
@@ -363,7 +373,6 @@ struct omap_sys_ctrl_regs {
 	u32 control_core_mac_id_0_hi;
 	u32 control_core_mac_id_1_lo;
 	u32 control_core_mac_id_1_hi;
-	u32 control_std_fuse_opp_vdd_mpu_2;
 	u32 control_phy_power_usb;
 	u32 control_core_mmr_lock1;
 	u32 control_core_mmr_lock2;
@@ -442,6 +451,10 @@ struct omap_sys_ctrl_regs {
 	u32 control_emif1_sdram_config_ext;
 	u32 control_emif2_sdram_config_ext;
 	u32 control_wkup_ldovbb_mpu_voltage_ctrl;
+	u32 control_wkup_ldovbb_mm_voltage_ctrl;
+	u32 control_wkup_ldovbb_iva_voltage_ctrl;
+	u32 control_wkup_ldovbb_eve_voltage_ctrl;
+	u32 control_wkup_ldovbb_gpu_voltage_ctrl;
 	u32 control_smart1nopmio_padconf_0;
 	u32 control_smart1nopmio_padconf_1;
 	u32 control_padconf_mode;
@@ -541,6 +554,8 @@ struct volts {
 	u32 addr;
 	struct volts_efuse_data efuse;
 	struct pmic_data *pmic;
+
+	u32 abb_tx_done_mask;
 };
 
 struct vcores_data {
@@ -603,15 +618,29 @@ void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
 	       u32 txdone, u32 txdone_mask, u32 opp);
 s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
 
-void usb_fake_mac_from_die_id(u32 *id);
-void usb_set_serial_num_from_die_id(u32 *id);
+void omap_die_id_serial(void);
+void omap_die_id_get_board_serial(struct tag_serialnr *serialnr);
+void omap_die_id_usbethaddr(void);
+void omap_die_id_display(void);
+
 void recalibrate_iodelay(void);
 
 void omap_smc1(u32 service, u32 val);
 
+/*
+ * Low-level helper function used when performing secure ROM calls on high-
+ * security (HS) device variants by doing a specially-formed smc entry.
+ */
+u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
+
 void enable_edma3_clocks(void);
 void disable_edma3_clocks(void);
 
+void omap_die_id(unsigned int *die_id);
+
+/* Initialize general purpose I2C(0) on the SoC */
+void gpi2c_init(void);
+
 /* ABB */
 #define OMAP_ABB_NOMINAL_OPP		0
 #define OMAP_ABB_FAST_OPP		1
@@ -692,6 +721,18 @@ static inline u8 is_dra72x(void)
 #define DRA752_ES1_1	0x07520110
 #define DRA752_ES2_0	0x07520200
 #define DRA722_ES1_0	0x07220100
+#define DRA722_ES2_0	0x07220200
+
+/*
+ * silicon device type
+ * Moving to common from cpu.h, since it is shared by various omap devices
+ */
+#define DEVICE_MASK         (BIT(8) | BIT(9) | BIT(10))
+#define TST_DEVICE          0x0
+#define EMU_DEVICE          0x1
+#define HS_DEVICE           0x2
+#define GP_DEVICE           0x3
+
 
 /*
  * SRAM scratch space entries
@@ -705,7 +746,9 @@ static inline u8 is_dra72x(void)
 #define OMAP_SRAM_SCRATCH_VCORES_PTR    (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
 #define OMAP_SRAM_SCRATCH_SYS_CTRL	(SRAM_SCRATCH_SPACE_ADDR + 0x20)
 #define OMAP_SRAM_SCRATCH_BOOT_PARAMS	(SRAM_SCRATCH_SPACE_ADDR + 0x24)
-#define OMAP5_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x28)
+#define OMAP_SRAM_SCRATCH_BOARD_EEPROM_START (SRAM_SCRATCH_SPACE_ADDR + 0x28)
+#define OMAP_SRAM_SCRATCH_BOARD_EEPROM_END (SRAM_SCRATCH_SPACE_ADDR + 0x200)
+#define OMAP_SRAM_SCRATCH_SPACE_END	(OMAP_SRAM_SCRATCH_BOARD_EEPROM_END)
 
 /* Boot parameters */
 #define DEVICE_DATA_OFFSET	0x18