X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Ffsl_secure_boot.h;h=ec6463dbb86c0e4cda097aed4e4120424f5a9be8;hb=b27af39935855c88ef2203dcfc1ff54e013237c4;hp=f097c81a921baf87600ef9b59d363a853e2df1bb;hpb=e536ab8849b2b4f6d68bbc8e1d1f9bc033db06bd;p=oweals%2Fu-boot.git

diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index f097c81a92..ec6463dbb8 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -7,19 +8,129 @@
 #ifndef __FSL_SECURE_BOOT_H
 #define __FSL_SECURE_BOOT_H
 
-#ifdef CONFIG_SECURE_BOOT
-#ifndef CONFIG_FIT_SIGNATURE
+#ifdef CONFIG_CHAIN_OF_TRUST
+#define CONFIG_FSL_SEC_MON
 
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Define the key hash for U-Boot here if public/private key pair used to
+ * sign U-boot are different from the SRK hash put in the fuse
+ * Example of defining KEY_HASH is
+ * #define CONFIG_SPL_UBOOT_KEY_HASH \
+ *      "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ * else leave it defined as NULL
+ */
+
+#define CONFIG_SPL_UBOOT_KEY_HASH	NULL
+#endif /* ifdef CONFIG_SPL_BUILD */
+
+#define CONFIG_KEY_REVOCATION
+
+#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_SYS_RAMBOOT
+/* The key used for verification of next level images
+ * is picked up from an Extension Table which has
+ * been verified by the ISBC (Internal Secure boot Code)
+ * in boot ROM of the SoC.
+ * The feature is only applicable in case of NOR boot and is
+ * not applicable in case of RAMBOOT (NAND, SD, SPI).
+ * For LS, this feature is available for all device if IE Table
+ * is copied to XIP memory
+ * Also, for LS, ISBC doesn't verify this table.
+ */
+#define CONFIG_FSL_ISBC_KEY_EXT
+
+#endif
+
+#if defined(CONFIG_FSL_LAYERSCAPE)
+/*
+ * For fsl layerscape based platforms, ESBC image Address in Header
+ * is 64 bit.
+ */
+#define CONFIG_ESBC_ADDR_64BIT
+#endif
+
+#ifdef CONFIG_ARCH_LS2080A
 #define CONFIG_EXTRA_ENV \
-	"setenv fdt_high 0xcfffffff;"	\
+	"setenv fdt_high 0xa0000000;"	\
 	"setenv initrd_high 0xcfffffff;"	\
 	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#else
+#define CONFIG_EXTRA_ENV \
+	"setenv fdt_high 0xffffffff;"	\
+	"setenv initrd_high 0xffffffff;"	\
+	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#endif
 
-/* The address needs to be modified according to NOR memory map */
-#define CONFIG_BOOTSCRIPT_HDR_ADDR	0x600a0000
-
-#include <config_fsl_secboot.h>
+/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
+ * Non-XIP Memory (Nand/SD)*/
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \
+	defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT)
+#define CONFIG_BOOTSCRIPT_COPY_RAM
+#endif
+/* The address needs to be modified according to NOR, NAND, SD and
+ * DDR memory map
+ */
+#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_BS_ADDR_DEVICE		0x20600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x20640000
+#else /* NOR BOOT */
+#define CONFIG_BS_ADDR_DEVICE		0x580600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x580640000
+#endif /*ifdef CONFIG_QSPI_BOOT */
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00004000
+#define CONFIG_BS_ADDR_RAM		0xa0600000
+#define CONFIG_BS_HDR_ADDR_RAM		0xa0640000
+#else
+#ifdef CONFIG_SD_BOOT
+/* For SD boot address and size are assigned in terms of sector
+ * offset and no. of sectors respectively.
+ */
+#define CONFIG_BS_ADDR_DEVICE		0x00003000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00003200
+#define CONFIG_BS_SIZE			0x00000008
+#define CONFIG_BS_HDR_SIZE		0x00000010
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BS_ADDR_DEVICE		0x00600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00640000
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BS_ADDR_DEVICE		0x40600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x40640000
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#else /* Default NOR Boot */
+#define CONFIG_BS_ADDR_DEVICE		0x60600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x60640000
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#endif
+#define CONFIG_BS_ADDR_RAM		0x81000000
+#define CONFIG_BS_HDR_ADDR_RAM		0x81020000
 #endif
+
+#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
+#define CONFIG_BOOTSCRIPT_ADDR		CONFIG_BS_ADDR_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_RAM
+#else
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_DEVICE
+/* BOOTSCRIPT_ADDR is not required */
 #endif
 
+#ifdef CONFIG_FSL_LS_PPA
+/* Define the key hash here if SRK used for signing PPA image is
+ * different from SRK hash put in SFP used for U-Boot.
+ * Example
+ * #define PPA_KEY_HASH \
+ *	"41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ */
+#define PPA_KEY_HASH		NULL
+#endif /* ifdef CONFIG_FSL_LS_PPA */
+
+#include <config_fsl_chain_trust.h>
+#endif /* #ifndef CONFIG_SPL_BUILD */
+#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
 #endif