X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Farch-sunxi%2Fclock_sun6i.h;h=d328df9597d08aae080a95e7cdc18dfbe2df97c2;hb=4f84cb980fdc25d7735fe114021b4a84ea601b9f;hp=d4dff1e3463e5a532aa79645ecd08dc8d2651209;hpb=1f9ef0dca0a1315f0a216808ade8946bcc54e2b4;p=oweals%2Fu-boot.git diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index d4dff1e346..d328df9597 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -25,7 +25,7 @@ struct sunxi_ccm_reg { u32 pll6_cfg; /* 0x28 pll6 control */ u32 reserved5; u32 pll7_cfg; /* 0x30 pll7 control */ - u32 reserved6; + u32 sata_pll_cfg; /* 0x34 SATA pll control (R40 only) */ u32 pll8_cfg; /* 0x38 pll8 control */ u32 reserved7; u32 mipi_pll_cfg; /* 0x40 MIPI pll control */ @@ -58,7 +58,8 @@ struct sunxi_ccm_reg { u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */ u32 reserved10[2]; u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */ - u32 reserved11[2]; + u32 reserved11; + u32 sata_clk_cfg; /* 0xc8 SATA clock control (R40 only) */ u32 usb_clk_cfg; /* 0xcc USB clock control */ u32 gmac_clk_cfg; /* 0xd0 GMAC clock control */ u32 reserved12[7]; @@ -67,14 +68,24 @@ struct sunxi_ccm_reg { u32 dram_pll_cfg; /* 0xf8 PLL_DDR cfg register, A33 only */ u32 mbus_reset; /* 0xfc MBUS reset control, A33 only */ u32 dram_clk_gate; /* 0x100 DRAM module gating */ +#ifdef CONFIG_SUNXI_DE2 + u32 de_clk_cfg; /* 0x104 DE module clock */ +#else u32 be0_clk_cfg; /* 0x104 BE0 module clock */ +#endif u32 be1_clk_cfg; /* 0x108 BE1 module clock */ u32 fe0_clk_cfg; /* 0x10c FE0 module clock */ u32 fe1_clk_cfg; /* 0x110 FE1 module clock */ u32 mp_clk_cfg; /* 0x114 MP module clock */ +#ifdef CONFIG_SUNXI_DE2 + u32 lcd0_clk_cfg; /* 0x118 LCD0 module clock */ + u32 lcd1_clk_cfg; /* 0x11c LCD1 module clock */ +#else u32 lcd0_ch0_clk_cfg; /* 0x118 LCD0 CH0 module clock */ u32 lcd1_ch0_clk_cfg; /* 0x11c LCD1 CH0 module clock */ - u32 reserved14[3]; +#endif + u32 tve_clk_cfg; /* 0x120 H3/H5 TVE module clock */ + u32 reserved14[2]; u32 lcd0_ch1_clk_cfg; /* 0x12c LCD0 CH1 module clock */ u32 lcd1_ch1_clk_cfg; /* 0x130 LCD1 CH1 module clock */ u32 csi0_clk_cfg; /* 0x134 CSI0 module clock */ @@ -85,7 +96,11 @@ struct sunxi_ccm_reg { u32 dmic_clk_cfg; /* 0x148 Digital Mic module clock*/ u32 reserved15; u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */ +#ifdef CONFIG_SUNXI_DE2 + u32 hdmi_slow_clk_cfg; /* 0x154 HDMI slow module clock */ +#else u32 ps_clk_cfg; /* 0x154 PS module clock */ +#endif u32 mtc_clk_cfg; /* 0x158 MTC module clock */ u32 mbus0_clk_cfg; /* 0x15c MBUS0 module clock */ u32 mbus1_clk_cfg; /* 0x160 MBUS1 module clock */ @@ -116,7 +131,9 @@ struct sunxi_ccm_reg { u32 mipi_bias_cfg; /* 0x240 MIPI Bias config */ u32 pll9_bias_cfg; /* 0x244 PLL9 Bias config */ u32 pll10_bias_cfg; /* 0x248 PLL10 Bias config */ - u32 reserved21[13]; + u32 reserved21[5]; + u32 pll5_tuning_cfg; /* 0x260 PLL5 Tuning config */ + u32 reserved21_5[7]; u32 pll1_pattern_cfg; /* 0x280 PLL1 Pattern config */ u32 pll2_pattern_cfg; /* 0x284 PLL2 Pattern config */ u32 pll3_pattern_cfg; /* 0x288 PLL3 Pattern config */ @@ -140,6 +157,8 @@ struct sunxi_ccm_reg { u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */ u32 reserved25[5]; u32 ccu_sec_switch; /* 0x2f0 CCU Security Switch, H3 only */ + u32 reserved26[11]; + u32 pll_lock_ctrl; /* 0x320 PLL lock control, R40 only */ }; /* apb2 bit field */ @@ -189,6 +208,7 @@ struct sunxi_ccm_reg { #define CCM_PLL3_CTRL_N_MASK (0x7f << CCM_PLL3_CTRL_N_SHIFT) #define CCM_PLL3_CTRL_N(n) ((((n) - 1) & 0x7f) << 8) #define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 24) +#define CCM_PLL3_CTRL_LOCK (0x1 << 28) #define CCM_PLL3_CTRL_EN (0x1 << 31) #define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0) @@ -206,6 +226,8 @@ struct sunxi_ccm_reg { #define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) #define CCM_PLL6_CTRL_LOCK (1 << 28) +#define CCM_SATA_PLL_DEFAULT 0x90005811 /* 100 MHz */ + #define CCM_MIPI_PLL_CTRL_M_SHIFT 0 #define CCM_MIPI_PLL_CTRL_M_MASK (0xf << CCM_MIPI_PLL_CTRL_M_SHIFT) #define CCM_MIPI_PLL_CTRL_M(n) ((((n) - 1) & 0xf) << 0) @@ -218,11 +240,26 @@ struct sunxi_ccm_reg { #define CCM_MIPI_PLL_CTRL_LDO_EN (0x3 << 22) #define CCM_MIPI_PLL_CTRL_EN (0x1 << 31) +#define CCM_PLL10_CTRL_M_SHIFT 0 +#define CCM_PLL10_CTRL_M_MASK (0xf << CCM_PLL10_CTRL_M_SHIFT) +#define CCM_PLL10_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_PLL10_CTRL_N_SHIFT 8 +#define CCM_PLL10_CTRL_N_MASK (0x7f << CCM_PLL10_CTRL_N_SHIFT) +#define CCM_PLL10_CTRL_N(n) ((((n) - 1) & 0x7f) << 8) +#define CCM_PLL10_CTRL_INTEGER_MODE (0x1 << 24) +#define CCM_PLL10_CTRL_LOCK (0x1 << 28) +#define CCM_PLL10_CTRL_EN (0x1 << 31) + #define CCM_PLL11_CTRL_N(n) ((((n) - 1) & 0x3f) << 8) #define CCM_PLL11_CTRL_SIGMA_DELTA_EN (0x1 << 24) #define CCM_PLL11_CTRL_UPD (0x1 << 30) #define CCM_PLL11_CTRL_EN (0x1 << 31) +#define CCM_PLL5_TUN_LOCK_TIME(x) (((x) & 0x7) << 24) +#define CCM_PLL5_TUN_LOCK_TIME_MASK CCM_PLL5_TUN_LOCK_TIME(0x7) +#define CCM_PLL5_TUN_INIT_FREQ(x) (((x) & 0x7f) << 16) +#define CCM_PLL5_TUN_INIT_FREQ_MASK CCM_PLL5_TUN_INIT_FREQ(0x7f) + #if defined(CONFIG_MACH_SUN50I) /* AHB1=100MHz failsafe setup from the FEL mode, usable with PMIC defaults */ #define AHB1_ABP1_DIV_DEFAULT 0x00003190 /* AHB1=PLL6/6,APB1=AHB1/2 */ @@ -235,7 +272,7 @@ struct sunxi_ccm_reg { /* ahb_gate0 offsets */ #define AHB_GATE_OFFSET_USB_OHCI1 30 #define AHB_GATE_OFFSET_USB_OHCI0 29 -#ifdef CONFIG_MACH_SUN8I_H3 +#ifdef CONFIG_MACH_SUNXI_H3_H5 /* * These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call * them 0 - 2 like they were called on older SoCs. @@ -247,7 +284,12 @@ struct sunxi_ccm_reg { #define AHB_GATE_OFFSET_USB_EHCI1 27 #define AHB_GATE_OFFSET_USB_EHCI0 26 #endif +#ifndef CONFIG_MACH_SUN8I_R40 #define AHB_GATE_OFFSET_USB0 24 +#else +#define AHB_GATE_OFFSET_USB0 25 +#define AHB_GATE_OFFSET_SATA 24 +#endif #define AHB_GATE_OFFSET_MCTL 14 #define AHB_GATE_OFFSET_GMAC 17 #define AHB_GATE_OFFSET_NAND0 13 @@ -264,9 +306,16 @@ struct sunxi_ccm_reg { #define AHB_GATE_OFFSET_DRC0 25 #define AHB_GATE_OFFSET_DE_FE0 14 #define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_DE 12 #define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_TVE 9 +#ifndef CONFIG_SUNXI_DE2 #define AHB_GATE_OFFSET_LCD1 5 #define AHB_GATE_OFFSET_LCD0 4 +#else +#define AHB_GATE_OFFSET_LCD1 4 +#define AHB_GATE_OFFSET_LCD0 3 +#endif #define CCM_MMC_CTRL_M(x) ((x) - 1) #define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8) @@ -276,6 +325,9 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_PLL6 (0x1 << 24) #define CCM_MMC_CTRL_ENABLE (0x1 << 31) +#define CCM_SATA_CTRL_ENABLE (0x1 << 31) +#define CCM_SATA_CTRL_USE_EXTCLK (0x1 << 24) + #define CCM_USB_CTRL_PHY0_RST (0x1 << 0) #define CCM_USB_CTRL_PHY1_RST (0x1 << 1) #define CCM_USB_CTRL_PHY2_RST (0x1 << 2) @@ -286,7 +338,7 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9) #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10) #define CCM_USB_CTRL_PHY3_CLK (0x1 << 11) -#ifdef CONFIG_MACH_SUN8I_H3 +#ifdef CONFIG_MACH_SUNXI_H3_H5 /* * These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call * them 0 - 2 like they were called on older SoCs. @@ -315,6 +367,7 @@ struct sunxi_ccm_reg { #define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8) #define CCM_DRAMCLK_CFG_SRC_PLL5 (0x0 << 20) #define CCM_DRAMCLK_CFG_SRC_PLL6x2 (0x1 << 20) +#define CCM_DRAMCLK_CFG_SRC_PLL11 (0x1 << 20) /* A64 only */ #define CCM_DRAMCLK_CFG_SRC_MASK (0x3 << 20) #define CCM_DRAMCLK_CFG_UPD (0x1 << 16) #define CCM_DRAMCLK_CFG_RST (0x1 << 31) @@ -347,6 +400,12 @@ struct sunxi_ccm_reg { #define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) #define CCM_LCD_CH1_CTRL_GATE (0x1 << 31) +#define CCM_LCD0_CTRL_GATE (0x1 << 31) +#define CCM_LCD0_CTRL_M(n) ((((n) - 1) & 0xf) << 0) + +#define CCM_LCD1_CTRL_GATE (0x1 << 31) +#define CCM_LCD1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) + #define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) #define CCM_HDMI_CTRL_PLL_MASK (3 << 24) #define CCM_HDMI_CTRL_PLL3 (0 << 24) @@ -356,6 +415,11 @@ struct sunxi_ccm_reg { #define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30) #define CCM_HDMI_CTRL_GATE (0x1 << 31) +#define CCM_HDMI_SLOW_CTRL_DDC_GATE (1 << 31) + +#define CCM_TVE_CTRL_GATE (0x1 << 31) +#define CCM_TVE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) + #if defined(CONFIG_MACH_SUN50I) #define MBUS_CLK_DEFAULT 0x81000002 /* PLL6x2 / 3 */ #elif defined(CONFIG_MACH_SUN8I) @@ -369,6 +433,9 @@ struct sunxi_ccm_reg { #define CCM_PLL11_PATTERN 0xf5860000 /* ahb_reset0 offsets */ +#ifdef CONFIG_MACH_SUN8I_R40 +#define AHB_RESET_OFFSET_SATA 24 +#endif #define AHB_RESET_OFFSET_GMAC 17 #define AHB_RESET_OFFSET_MCTL 14 #define AHB_RESET_OFFSET_MMC3 11 @@ -383,9 +450,17 @@ struct sunxi_ccm_reg { #define AHB_RESET_OFFSET_DRC0 25 #define AHB_RESET_OFFSET_DE_FE0 14 #define AHB_RESET_OFFSET_DE_BE0 12 +#define AHB_RESET_OFFSET_DE 12 #define AHB_RESET_OFFSET_HDMI 11 +#define AHB_RESET_OFFSET_HDMI2 10 +#define AHB_RESET_OFFSET_TVE 9 +#ifndef CONFIG_SUNXI_DE2 #define AHB_RESET_OFFSET_LCD1 5 #define AHB_RESET_OFFSET_LCD0 4 +#else +#define AHB_RESET_OFFSET_LCD1 4 +#define AHB_RESET_OFFSET_LCD0 3 +#endif /* ahb_reset2 offsets */ #define AHB_RESET_OFFSET_EPHY 2 @@ -408,6 +483,13 @@ struct sunxi_ccm_reg { #define CCM_DE_CTRL_PLL10 (5 << 24) #define CCM_DE_CTRL_GATE (1 << 31) +/* CCM bits common to all Display Engine 2.0 clock ctrl regs */ +#define CCM_DE2_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE2_CTRL_PLL_MASK (3 << 24) +#define CCM_DE2_CTRL_PLL6_2X (0 << 24) +#define CCM_DE2_CTRL_PLL10 (1 << 24) +#define CCM_DE2_CTRL_GATE (0x1 << 31) + /* CCU security switch, H3 only */ #define CCM_SEC_SWITCH_MBUS_NONSEC (1 << 2) #define CCM_SEC_SWITCH_BUS_NONSEC (1 << 1) @@ -416,7 +498,9 @@ struct sunxi_ccm_reg { #ifndef __ASSEMBLY__ void clock_set_pll1(unsigned int hz); void clock_set_pll3(unsigned int hz); +void clock_set_pll3_factors(int m, int n); void clock_set_pll5(unsigned int clk, bool sigma_delta_enable); +void clock_set_pll10(unsigned int hz); void clock_set_pll11(unsigned int clk, bool sigma_delta_enable); void clock_set_mipi_pll(unsigned int hz); unsigned int clock_get_pll3(void);