X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fsun7i-a20-i12-tvbox.dts;h=5f1c4f573d3eac3cbb3c900014119b97a629a78f;hb=ef8b7e045ec744dce385cac4b1438c9be6e2bbc8;hp=2e3f2f29d124a036c9d45a15707bf460e1ade81a;hpb=b592936d357f6c648f59ae0e3159149df3a942fb;p=oweals%2Fu-boot.git

diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
index 2e3f2f29d1..5f1c4f573d 100644
--- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -61,8 +61,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_i12_tvbox>;
 
 		red {
 			label = "i12_tvbox:red:usr";
@@ -77,8 +75,6 @@
 
 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
 		regulator-name = "vmmc3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -88,8 +84,6 @@
 
 	reg_vmmc3_io: vmmc3-io {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
 		regulator-name = "vmmc3-io";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -101,8 +95,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -122,7 +114,7 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
+	pinctrl-0 = <&gmac_mii_pins>;
 	phy = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_gmac_3v3>;
@@ -134,8 +126,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -151,13 +141,11 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -165,8 +153,6 @@
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vmmc3>;
 	bus-width = <4>;
 	non-removable;
@@ -181,11 +167,6 @@
 	};
 };
 
-&mmc3_pins_a {
-	/* AP6210 / AP6330 requires pull-up */
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -194,28 +175,6 @@
 	status = "okay";
 };
 
-&pio {
-	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-		pins = "PH2";
-		function = "gpio_out";
-	};
-
-	vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-		pins = "PH12";
-		function = "gpio_out";
-	};
-
-	gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-		pins = "PH21";
-		function = "gpio_out";
-	};
-
-	led_pins_i12_tvbox: led_pins@0 {
-		pins = "PH9", "PH20";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -226,7 +185,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };