X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fsun4i-a10-jesurun-q5.dts;h=e28f080b1fd594aab9e82ed4a00454b625f4bc3a;hb=f812574e61e9bfe37e76e620606fd1a65cc9cdc2;hp=1b0452fea273bfddaead4d5fb1f44751e691ea18;hpb=622da1c36aee9c39075f2109848228a5737925c0;p=oweals%2Fu-boot.git

diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
index 1b0452fea2..e28f080b1f 100644
--- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -85,6 +80,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 	};
@@ -109,6 +105,10 @@
 	status = "okay";
 };
 
+&emac_sram {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -126,7 +126,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins_a>;
 	status = "okay";
 };
 
@@ -157,6 +157,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	emac_power_pin_q5: emac_power_pin@0 {
 		allwinner,pins = "PH19";
@@ -173,6 +177,11 @@
 	};
 };
 
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -187,7 +196,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";