X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fsun4i-a10-inet1.dts;h=26d0c1d6a02b4454ff34b214562732a86e59b8d7;hb=d22c8be964a870f59d2fdab6c67cefa0c4799364;hp=487ce63519dcf9f0a79cc0df11a13a121cf715ee;hpb=b1fc3c56d2dc502e7a32afeea5282a0d795920e2;p=oweals%2Fu-boot.git

diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts
index 487ce63519..26d0c1d6a0 100644
--- a/arch/arm/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/dts/sun4i-a10-inet1.dts
@@ -46,7 +46,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "iNet-1";
@@ -56,11 +56,23 @@
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -74,8 +86,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -87,8 +97,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -101,30 +109,39 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
 };
 
 &lradc {
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@1000 {
+	button-1000 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <1000000>;
 	};
 
-	button@1200 {
+	button-1200 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -133,12 +150,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -151,21 +165,25 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PH4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PH5";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -205,7 +223,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };