X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Frk3399-puma.dtsi;h=96bd4fec01d1734560b779324f4a79e492592bb2;hb=5f9b083cdb55d28a6d3b1bda53121598831a28ad;hp=04918861f408f8b2a9b9019794d5e714f80cd1c2;hpb=56f580d3eb8d1f8d62d51f6155f6d22e975ceefd;p=oweals%2Fu-boot.git diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 04918861f4..96bd4fec01 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -14,12 +14,14 @@ config { u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ + u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */ u-boot,boot-led = "module_led"; }; chosen { stdout-path = "serial0:115200n8"; - u-boot,spl-boot-order = &spiflash, &sdhci, &sdmmc; + u-boot,spl-boot-order = \ + "same-as-spl", &spiflash, &sdhci, &sdmmc; }; aliases { @@ -34,13 +36,13 @@ module_led { label = "module_led"; - gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; sd_card_led { label = "sd_card_led"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; }; @@ -88,6 +90,34 @@ }; }; + usbhub_enable: usbhub_enable { + compatible = "regulator-fixed"; + regulator-name = "usbhub_enable"; + enable-active-low; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module + * eMMC and SPI flash powered-down initially (in fact it keeps the + * reset signal asserted). Even though it is an enable signal, we + * model this as a regulator. + */ + bios_enable: bios_enable { + compatible = "regulator-fixed"; + u-boot,dm-pre-reloc; + regulator-name = "bios_enable"; + enable-active-high; + gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vccadc_ref: vccadc-ref { compatible = "regulator-fixed"; regulator-name = "vcc1v8_sys"; @@ -109,7 +139,7 @@ vcc5v0_otg: vcc5v0-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc5v0_otg"; @@ -119,7 +149,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-low; - gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc5v0_host"; @@ -165,7 +195,7 @@ phy-supply = <&vcc_phy>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio3 16 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <2 10000 50000>; assigned-clocks = <&cru SCLK_RMII_SRC>; @@ -193,7 +223,7 @@ vdd_gpu: fan535555@60 { compatible = "fcs,fan53555"; reg = <0x60>; - vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "fan53555-reg"; regulator-name = "vdd_gpu"; @@ -317,11 +347,11 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3000000>; regulator-name = "vcc_sd"; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-suspend-microvolt = <3000000>; }; }; @@ -395,7 +425,7 @@ vdd_cpu_b: fan53555@60 { compatible = "fcs,fan53555"; reg = <0x60>; - vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "fan53555-reg"; regulator-name = "vdd_cpu_b"; @@ -438,7 +468,7 @@ assigned-clocks = <&cru SCLK_PCIEPHY_REF>; assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; assigned-clock-rates = <100000000>; - ep-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn>; @@ -446,7 +476,7 @@ }; &pcie_phy { - status = "okay"; + status = "okay"; }; &pmu_io_domains { @@ -473,7 +503,7 @@ }; &sdmmc { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; clock-frequency = <150000000>; clock-freq-min-max = <100000 150000000>; supports-sd; @@ -493,27 +523,26 @@ }; &usb_host0_ehci { - status = "okay"; + status = "disabled"; }; &usb_host0_ohci { - status = "okay"; + status = "disabled"; }; &dwc3_typec0 { - status = "disabled"; + status = "okay"; }; &usb_host1_ehci { - status = "okay"; + status = "disabled"; }; &usb_host1_ohci { - status = "okay"; + status = "disabled"; }; &dwc3_typec1 { - rockchip,vbus-gpio = <&gpio4 3 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -521,50 +550,56 @@ status = "okay"; }; +&gpio3 { + u-boot,dm-pre-reloc; +}; + &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default"; pinctrl-0 = <&puma_pin_hog>; + hog { puma_pin_hog: puma_pin_hog { rockchip,pins = /* We need pull-ups on Q7 buttons */ - <0 4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */ - <0 10 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - <0 11 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - <0 9 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */ + , /* LID_BTN# */ + , /* BATLOW# */ + , /* SLP_BTN# */ + ; /* BIOS_DISABLE# */ }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 22 RK_FUNC_GPIO &pcfg_pull_up>; + ; }; }; leds_pins_puma: led_pins@0 { rockchip,pins = - <2 25 RK_FUNC_GPIO &pcfg_pull_none>, - <1 2 RK_FUNC_GPIO &pcfg_pull_none>; + , + ; }; usb2 { otg_vbus_drv: otg-vbus-drv { rockchip,pins = - <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + ; }; host_vbus_drv: host-vbus-drv { rockchip,pins = - <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + ; }; }; i2c8 { i2c8_xfer_a: i2c8-xfer { - rockchip,pins = <1 21 RK_FUNC_1 &pcfg_pull_up>, - <1 20 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = + , + ; }; }; }; @@ -589,8 +624,8 @@ &i2c6_xfer { /* Enable pull-ups, the pins would float otherwise. */ rockchip,pins = - <2 10 RK_FUNC_2 &pcfg_pull_up>, - <2 9 RK_FUNC_2 &pcfg_pull_up>; + , + ; }; &i2c7 { @@ -640,4 +675,3 @@ &spi5 { status = "okay"; }; -