X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fr8a77995-draak.dts;h=67634cb01d6b68567e23d1554b969915181df26c;hb=b52fb0b0b5da80a059ba982139401e57ac4e9a2e;hp=e758f12124eb0743920ea82831a226b4e37c9c51;hpb=9c486e7cb03787016d2d5a360c5a62296bf5ca7b;p=oweals%2Fu-boot.git

diff --git a/arch/arm/dts/r8a77995-draak.dts b/arch/arm/dts/r8a77995-draak.dts
index e758f12124..67634cb01d 100644
--- a/arch/arm/dts/r8a77995-draak.dts
+++ b/arch/arm/dts/r8a77995-draak.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Draak board
  *
- * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * SPDX-License-Identifier:	GPL-2.0
  */
 
 /dts-v1/;
@@ -20,30 +19,413 @@
 		ethernet0 = &avb;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+	};
+
 	chosen {
-		bootargs = "ignore_loglevel";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x18000000>;
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Draak board, however, TX clock internal delay mode
+		 * isn't supported on r8a77995.  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
 };
 
 &extal_clk {
 	clock-frequency = <48000000>;
 };
 
+&hsusb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+		reg-names = "main", "edid", "packet", "cec";
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+		/* Depends on LVDS */
+		max-clock = <135000000>;
+		min-vrefresh = <50>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &pfc {
 	avb0_pins: avb {
 		mux {
-			groups = "avb0_link", "avb0_mdc", "avb0_mii";
+			groups = "avb0_link", "avb0_mdio", "avb0_mii";
 			function = "avb0";
 		};
 	};
 
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data_a";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	pwm0_pins: pwm0 {
 		groups = "pwm0_c";
 		function = "pwm0";
@@ -59,33 +441,46 @@
 		function = "scif2";
 	};
 
+	sdhi2_pins: sd2 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
 	};
-};
 
-&ehci0 {
-	status = "okay";
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };
 
-&ohci0 {
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
-&avb {
-	pinctrl-0 = <&avb0_pins>;
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
 	pinctrl-names = "default";
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
+
 	status = "okay";
+};
 
-	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-	};
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
 };
 
 &scif2 {
@@ -95,28 +490,39 @@
 	status = "okay";
 };
 
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
+&sdhi2 {
+	/* used for on-board eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
 	status = "okay";
 };
 
-&pwm0 {
-	pinctrl-0 = <&pwm0_pins>;
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 
+	renesas,no-otg-pins;
 	status = "okay";
 };
 
-&pwm1 {
-	pinctrl-0 = <&pwm1_pins>;
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
 	pinctrl-names = "default";
 
 	status = "okay";
-};
 
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
+	ports {
+		port {
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
 };