X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fexynos5250-snow.dts;h=e41f2d3041e2f1a40358212a92f66e5a75ec99a2;hb=32fd6169a199506b2d2ee08bde3b027fa227cbb0;hp=7d8be69d73b7d14c522451bcf9ad552e4a74a97e;hpb=ade8bc14ad419f698406b162c9c5dfeee7406b4c;p=oweals%2Fu-boot.git diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index 7d8be69d73..e41f2d3041 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -7,24 +7,28 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; +#include +#include +#include #include "exynos5250.dtsi" / { model = "Google Snow"; - compatible = "google,snow", "samsung,exynos5250"; + compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5"; aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; + i2c0 = "/i2c@12C60000"; + i2c1 = "/i2c@12C70000"; + i2c2 = "/i2c@12C80000"; + i2c3 = "/i2c@12C90000"; + i2c4 = "/i2c@12CA0000"; + i2c104 = &i2c_104; + i2c5 = "/i2c@12CB0000"; + i2c6 = "/i2c@12CC0000"; + i2c7 = "/i2c@12CD0000"; spi0 = "/spi@12d20000"; spi1 = "/spi@12d30000"; spi2 = "/spi@12d40000"; @@ -36,38 +40,232 @@ mmc3 = "/mmc@12230000"; serial0 = "/serial@12C30000"; console = "/serial@12C30000"; - i2s = "/sound@3830000"; }; - i2c4: i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec"; - i2c-max-frequency = <100000>; - u-boot,i2c-offset-len = <0>; - ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>; + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; + }; + + iram { + reg = <0x02020000 0x60000>; + }; + + config { + samsung,bl1-offset = <0x1400>; + samsung,bl2-offset = <0x3400>; + u-boot-memory = "/memory"; + u-boot-offset = <0x3e00000 0x100000>; + }; + + flash { + reg = <0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + pre-boot { + label = "bl1 pre-boot"; + reg = <0 0x2000>; + read-only; + filename = "e5250.nbl1.bin"; + type = "blob exynos-bl1"; + required; }; - power-regulator@48 { - compatible = "ti,tps65090"; - reg = <0x48>; + spl { + label = "bl2 spl"; + reg = <0x2000 0x4000>; + read-only; + filename = "bl2.bin"; + type = "blob exynos-bl2 boot,dtb"; + payload = "/flash/ro-boot"; + required; + }; + + ro-boot { + label = "u-boot"; + reg = <0x6000 0xb0000>; + read-only; + type = "blob boot,dtb"; + required; + }; + }; + + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@12CA0000}>; + + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + /* Use ID 104 as a hint that we're on physical bus 4 */ + i2c_104: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + i2c-max-frequency = <100000>; + u-boot,i2c-offset-len = <0>; + ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>; + }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1: fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6: fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; + + i2c@12CD0000 { + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + #sound-dai-cells = <1>; + }; + }; + + i2c@12C90000 { + clock-frequency = <100000>; + tpm@20 { + reg = <0x20>; + u-boot,i2c-offset-len = <0>; + compatible = "infineon,slb9635tt"; }; }; spi@12d30000 { spi-max-frequency = <50000000>; firmware_storage_spi: flash@0 { - compatible = "spi-flash"; + compatible = "jedec,spi-nor"; reg = <0>; }; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; + }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + spi@131b0000 { spi-max-frequency = <1000000>; spi-deactivate-delay = <100>; - cros_ec: cros-ec@0 { - reg = <0>; - compatible = "google,cros-ec"; + + /* Snow did support SPI but the released version used I2C */ + embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; spi-max-frequency = <5000000>; ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>; optimise-flash-write; @@ -75,39 +273,30 @@ }; }; - sound@3830000 { - samsung,codec-type = "max98095"; - codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>; - }; + sound { + compatible = "google,snow-audio-max98095"; - sound@12d60000 { - status = "disabled"; - }; + samsung,model = "Snow-I2S-MAX98095"; + samsung,audio-codec = <&max98095>; + codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>; - i2c@12cd0000 { - soundcodec@22 { - reg = <0x22>; - compatible = "maxim,max98095-codec"; + cpu { + sound-dai = <&i2s0 0>; }; - ptn3460-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - /* - * TODO(sjg@chromium.org): Use GPIOs here - * powerdown-gpio = <&gpy2 5 0>; - * reset-gpio = <&gpx1 5 0>; - * edid-emulation = <5>; - * pinctrl-names = "default"; - * pinctrl-0 = <&ptn3460_gpios>; - */ + codec { + sound-dai = <&max98095 0>; }; }; - i2c@12c60000 { - pmic@9 { + sound@12d60000 { + status = "disabled"; + }; + + i2c@12C60000 { + max77686@09 { reg = <0x9>; - compatible = "maxim,max77686_pmic"; + compatible = "maxim,max77686"; }; }; @@ -133,6 +322,7 @@ ehci@12110000 { samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; }; xhci@12000000 { @@ -193,8 +383,171 @@ samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; }; +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + wakeup-source; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_mydp"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; +}; + #include "cros-ec-keyboard.dtsi"