X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Fs3c44b0%2Fstart.S;h=8daf26c4f033ddad242ee63876ca9f3bff7cbfb1;hb=7d5eb34908d3a7318d1a3f4afb2c926066a2befc;hp=8c7100c2bf756c49c86ceb053bb1fe6d25320a3b;hpb=d4752d5d2c6b240637a51a2f111b1b1a318fb0bf;p=oweals%2Fu-boot.git

diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 8c7100c2bf..8daf26c4f0 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -78,6 +78,10 @@ _bss_start_ofs:
 
 .globl _bss_end_ofs
 _bss_end_ofs:
+	.word __bss_end__ - _start
+
+.globl _end_ofs
+_end_ofs:
 	.word _end - _start
 
 #ifdef CONFIG_USE_IRQ
@@ -127,6 +131,7 @@ reset:
 /* Set stackpointer in internal RAM to call board_init_f */
 call_board_init_f:
 	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
+	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
 	ldr	r0,=0x00000000
 	bl	board_init_f
 
@@ -144,31 +149,30 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
-	ldr	r2, _TEXT_BASE
+	cmp	r0, r6
+	beq	clear_bss		/* skip relocation */
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
-	cmp	r0, r6
-	beq	clear_bss
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
-#ifndef CONFIG_PRELOADER
+#ifndef CONFIG_SPL_BUILD
 	/*
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -179,10 +183,10 @@ fixloop:
 	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
 	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
 	ldr	r1, [r2, #4]
-	and	r8, r1, #0xff
-	cmp	r8, #23			/* relative fixup? */
+	and	r7, r1, #0xff
+	cmp	r7, #23			/* relative fixup? */
 	beq	fixrel
-	cmp	r8, #2			/* absolute fixup? */
+	cmp	r7, #2			/* absolute fixup? */
 	beq	fixabs
 	/* ignore unknown type of fixup */
 	b	fixnext
@@ -191,7 +195,7 @@ fixabs:
 	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
 	add	r1, r10, r1		/* r1 <- address of symbol in table */
 	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r9			/* r1 <- relocated sym addr */
+	add	r1, r1, r9		/* r1 <- relocated sym addr */
 	b	fixnext
 fixrel:
 	/* relative fix: increase location by offset */
@@ -205,22 +209,23 @@ fixnext:
 #endif
 
 clear_bss:
-#ifndef CONFIG_PRELOADER
+#ifndef CONFIG_SPL_BUILD
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
-	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
-	bl red_LED_on
+	bl red_led_on
 #endif
 
 /*
@@ -233,7 +238,7 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr