X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Farmv8%2Fzynqmp%2FKconfig;h=5ac48ebc4d1aa904b4af16a00844106fa1ab6293;hb=e0752bc18422ec0dc93a770e96b1c2f44ee64ed7;hp=e5a4fdd0fda0924f74075b4f4d5dc199601ac457;hpb=16fa00a71147de0fb87062f912478a0551d148d3;p=oweals%2Fu-boot.git

diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index e5a4fdd0fd..5ac48ebc4d 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -1,30 +1,116 @@
 if ARCH_ZYNQMP
 
-choice
-	prompt "Xilinx ZynqMP board select"
+config SPL_FAT_SUPPORT
+	default y
 
-config TARGET_ZYNQMP_EP
-	bool "ZynqMP EP Board"
+config SPL_LIBCOMMON_SUPPORT
+	default y
 
-endchoice
+config SPL_LIBDISK_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_MMC_SUPPORT
+	default y if MMC_SDHCI_ZYNQ
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config SPL_SPI_FLASH_SUPPORT
+	default y if ZYNQ_QSPI
+
+config SPL_SPI_SUPPORT
+	default y if ZYNQ_QSPI
 
 config SYS_BOARD
 	default "zynqmp"
 
 config SYS_VENDOR
+	string "Vendor name"
 	default "xilinx"
 
 config SYS_SOC
 	default "zynqmp"
 
 config SYS_CONFIG_NAME
-	default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP
+	string "Board configuration name"
+	default "xilinx_zynqmp"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
 
-config SECURE_IOU
-	bool "Configure ZynqMP secure IOU"
-	default n
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	depends on SPL
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
 
 config ZYNQMP_USB
 	bool "Configure ZynqMP USB"
 
+config SYS_MALLOC_F_LEN
+	default 0x600
+
+config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+	bool "Overwrite SPL bootmode"
+	depends on SPL
+	help
+	  Overwrite bootmode selected via boot mode pins to tell SPL what should
+	  be the next boot device.
+
+config SPL_ZYNQMP_ALT_BOOTMODE
+	hex
+	default 0x0 if JTAG_MODE
+	default 0x1 if QSPI_MODE_24BIT
+	default 0x2 if QSPI_MODE_32BIT
+	default 0x3 if SD_MODE
+	default 0x4 if NAND_MODE
+	default 0x5 if SD_MODE1
+	default 0x6 if EMMC_MODE
+	default 0x7 if USB_MODE
+	default 0xa if SW_USBHOST_MODE
+	default 0xb if SW_SATA_MODE
+
+choice
+	prompt "Boot mode"
+	depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+	default JTAG
+
+config JTAG_MODE
+	bool "JTAG_MODE"
+
+config QSPI_MODE_24BIT
+	bool "QSPI_MODE_24BIT"
+
+config QSPI_MODE_32BIT
+	bool "QSPI_MODE_32BIT"
+
+config SD_MODE
+	bool "SD_MODE"
+
+config SD_MODE1
+	bool "SD_MODE1"
+
+config NAND_MODE
+	bool "NAND_MODE"
+
+config EMMC_MODE
+	bool "EMMC_MODE"
+
+config USB_MODE
+	bool "USB"
+
+config SW_USBHOST_MODE
+	bool "SW USBHOST_MODE"
+
+config SW_SATA_MODE
+	bool "SW SATA_MODE"
+
+endchoice
+
 endif