X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Farmv8%2Fzynqmp%2FKconfig;h=5ac48ebc4d1aa904b4af16a00844106fa1ab6293;hb=e0752bc18422ec0dc93a770e96b1c2f44ee64ed7;hp=51f3384718521451583c0bb96273677d130bd37e;hpb=1646eba85c9755552d246099a82329e4caba32ee;p=oweals%2Fu-boot.git

diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index 51f3384718..5ac48ebc4d 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -9,10 +9,26 @@ config SPL_LIBCOMMON_SUPPORT
 config SPL_LIBDISK_SUPPORT
 	default y
 
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_MMC_SUPPORT
+	default y if MMC_SDHCI_ZYNQ
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config SPL_SPI_FLASH_SUPPORT
+	default y if ZYNQ_QSPI
+
+config SPL_SPI_SUPPORT
+	default y if ZYNQ_QSPI
+
 config SYS_BOARD
 	default "zynqmp"
 
 config SYS_VENDOR
+	string "Vendor name"
 	default "xilinx"
 
 config SYS_SOC
@@ -26,11 +42,75 @@ config SYS_CONFIG_NAME
 	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
 	  will be used for board configuration.
 
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	depends on SPL
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
 config ZYNQMP_USB
 	bool "Configure ZynqMP USB"
 
 config SYS_MALLOC_F_LEN
 	default 0x600
 
+config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+	bool "Overwrite SPL bootmode"
+	depends on SPL
+	help
+	  Overwrite bootmode selected via boot mode pins to tell SPL what should
+	  be the next boot device.
+
+config SPL_ZYNQMP_ALT_BOOTMODE
+	hex
+	default 0x0 if JTAG_MODE
+	default 0x1 if QSPI_MODE_24BIT
+	default 0x2 if QSPI_MODE_32BIT
+	default 0x3 if SD_MODE
+	default 0x4 if NAND_MODE
+	default 0x5 if SD_MODE1
+	default 0x6 if EMMC_MODE
+	default 0x7 if USB_MODE
+	default 0xa if SW_USBHOST_MODE
+	default 0xb if SW_SATA_MODE
+
+choice
+	prompt "Boot mode"
+	depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+	default JTAG
+
+config JTAG_MODE
+	bool "JTAG_MODE"
+
+config QSPI_MODE_24BIT
+	bool "QSPI_MODE_24BIT"
+
+config QSPI_MODE_32BIT
+	bool "QSPI_MODE_32BIT"
+
+config SD_MODE
+	bool "SD_MODE"
+
+config SD_MODE1
+	bool "SD_MODE1"
+
+config NAND_MODE
+	bool "NAND_MODE"
+
+config EMMC_MODE
+	bool "EMMC_MODE"
+
+config USB_MODE
+	bool "USB"
+
+config SW_USBHOST_MODE
+	bool "SW USBHOST_MODE"
+
+config SW_SATA_MODE
+	bool "SW SATA_MODE"
+
+endchoice
 
 endif