X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Farmv7%2Fstart.S;h=eee648bdc405f8ac8db7c0e4414f0c79c81d319f;hb=cdf1a2328a76cc57837d9a6e14a4f11f3a58b2e6;hp=6387b8b0aa1c381817227c23f3f5cfbcad2263ab;hpb=b32e8126a33098bb4e851a7e2da329fc2c7e52c8;p=oweals%2Fu-boot.git

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 6387b8b0aa..eee648bdc4 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -70,6 +70,18 @@ _end_vect:
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
+#ifdef CONFIG_TEGRA2
+/*
+ * Tegra2 uses 2 separate CPUs - the AVP (ARM7TDMI) and the CPU (dual A9s).
+ * U-Boot runs on the AVP first, setting things up for the CPU (PLLs,
+ * muxes, clocks, clamps, etc.). Then the AVP halts, and expects the CPU
+ * to pick up its reset vector, which points here.
+ */
+.globl _armboot_start
+_armboot_start:
+	.word _start
+#endif
+
 /*
  * These are defined in the board-specific linker script.
  */
@@ -243,6 +255,14 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
  * initialization, now running from RAM.
  */
 jump_2_ram:
+/*
+ * If I-cache is enabled invalidate it
+ */
+#ifndef CONFIG_SYS_ICACHE_OFF
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c5, 4	@ ISB
+#endif
 	ldr	r0, _board_init_r_ofs
 	adr	r1, _start
 	add	lr, r0, r1
@@ -263,6 +283,7 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
 /*************************************************************************
  *
  * CPU_init_critical registers
@@ -278,6 +299,9 @@ cpu_init_crit:
 	mov	r0, #0			@ set up for MCR
 	mcr	p15, 0, r0, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
+	mcr	p15, 0, r0, c7, c5, 6	@ invalidate BP array
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c5, 4	@ ISB
 
 	/*
 	 * disable MMU stuff and caches
@@ -286,7 +310,12 @@ cpu_init_crit:
 	bic	r0, r0, #0x00002000	@ clear bits 13 (--V-)
 	bic	r0, r0, #0x00000007	@ clear bits 2:0 (-CAM)
 	orr	r0, r0, #0x00000002	@ set bit 1 (--A-) Align
-	orr	r0, r0, #0x00000800	@ set bit 12 (Z---) BTB
+	orr	r0, r0, #0x00000800	@ set bit 11 (Z---) BTB
+#ifdef CONFIG_SYS_ICACHE_OFF
+	bic	r0, r0, #0x00001000	@ clear bit 12 (I) I-cache
+#else
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-cache
+#endif
 	mcr	p15, 0, r0, c1, c0, 0
 
 	/*
@@ -299,6 +328,7 @@ cpu_init_crit:
 	bl	lowlevel_init		@ go setup pll,mux,memory
 	mov	lr, ip			@ restore link
 	mov	pc, lr			@ back to my caller
+#endif
 /*
  *************************************************************************
  *