X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2Fcpu%2Farmv7%2Fstart.S;h=b18094447b0601e8a7ff539c0b286c693c66d5da;hb=5b3b0d687ef927fff56d6c2af1f2a1134e6ee31c;hp=5feae7ace3c1560806f34e0fc97369cefe4c03ea;hpb=314dd4fecc87175f6e79eb977966fb60b33c543c;p=oweals%2Fu-boot.git diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 5feae7ace3..b18094447b 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -10,125 +10,31 @@ * Copyright (c) 2003 Kshitij * Copyright (c) 2006-2008 Syed Mohammed Khasim * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include #include -#include #include #include -.globl _start -_start: b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq -#ifdef CONFIG_SPL_BUILD -_undefined_instruction: .word _undefined_instruction -_software_interrupt: .word _software_interrupt -_prefetch_abort: .word _prefetch_abort -_data_abort: .word _data_abort -_not_used: .word _not_used -_irq: .word _irq -_fiq: .word _fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#else -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#endif /* CONFIG_SPL_BUILD */ - -.global _end_vect -_end_vect: - - .balignl 16,0xdeadbeef /************************************************************************* * * Startup Code (reset vector) * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack + * Do important init only if we don't start from memory! + * Setup memory and board specific bits prior to relocation. + * Relocate armboot to ram. Setup stack. * *************************************************************************/ -.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset + .globl save_boot_params_ret reset: - bl save_boot_params + /* Allow the board to save important registers */ + b save_boot_params +save_boot_params_ret: /* * disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode, * except if in HYP mode already @@ -147,10 +53,10 @@ reset: * Continue to use ROM code vector only in OMAP4 spl) */ #if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) - /* Set V=0 in CP15 SCTRL register - for VBAR to point to vector */ - mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTRL Register + /* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */ + mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register bic r0, #CR_V @ V = 0 - mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTRL Register + mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTLR Register /* Set vector address in CP15 VBAR register */ ldr r0, =_start @@ -167,80 +73,6 @@ reset: /*------------------------------------------------------------------------------*/ -#ifndef CONFIG_SPL_BUILD -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ -ENTRY(relocate_code) - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop - -relocate_done: - - bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start -ENDPROC(relocate_code) - -#endif - ENTRY(c_runtime_cpu_setup) /* * If I-cache is enabled invalidate it @@ -250,14 +82,6 @@ ENTRY(c_runtime_cpu_setup) mcr p15, 0, r0, c7, c10, 4 @ DSB mcr p15, 0, r0, c7, c5, 4 @ ISB #endif -/* - * Move vector table - */ -#if !defined(CONFIG_TEGRA) - /* Set vector address in CP15 VBAR register */ - ldr r0, =_start - mcr p15, 0, r0, c12, c0, 0 @Set VBAR -#endif /* !Tegra */ bx lr @@ -273,7 +97,7 @@ ENDPROC(c_runtime_cpu_setup) * *************************************************************************/ ENTRY(save_boot_params) - bx lr @ back to my caller + b save_boot_params_ret @ back to my caller ENDPROC(save_boot_params) .weak save_boot_params @@ -317,7 +141,7 @@ ENTRY(cpu_init_cp15) mcr p15, 0, r0, c1, c0, 0 @ write system control register #endif -#ifdef CONFIG_ARM_ERRATA_742230 +#if (defined(CONFIG_ARM_ERRATA_742230) || defined(CONFIG_ARM_ERRATA_794072)) mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register orr r0, r0, #1 << 4 @ set bit #4 mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register @@ -334,8 +158,96 @@ ENTRY(cpu_init_cp15) orr r0, r0, #1 << 11 @ set bit #11 mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_761320 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 21 @ set bit #21 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif - mov pc, lr @ back to my caller + mov r5, lr @ Store my Caller + mrc p15, 0, r1, c0, c0, 0 @ r1 has Read Main ID Register (MIDR) + mov r3, r1, lsr #20 @ get variant field + and r3, r3, #0xf @ r3 has CPU variant + and r4, r1, #0xf @ r4 has CPU revision + mov r2, r3, lsl #4 @ shift variant field for combined value + orr r2, r4, r2 @ r2 has combined CPU variant + revision + +#ifdef CONFIG_ARM_ERRATA_798870 + cmp r2, #0x30 @ Applies to lower than R3p0 + bge skip_errata_798870 @ skip if not affected rev + cmp r2, #0x20 @ Applies to including and above R2p0 + blt skip_errata_798870 @ skip if not affected rev + + mrc p15, 1, r0, c15, c0, 0 @ read l2 aux ctrl reg + orr r0, r0, #1 << 7 @ Enable hazard-detect timeout + push {r1-r5} @ Save the cpu info registers + bl v7_arch_cp15_set_l2aux_ctrl + isb @ Recommended ISB after l2actlr update + pop {r1-r5} @ Restore the cpu info - fall through +skip_errata_798870: +#endif + +#ifdef CONFIG_ARM_ERRATA_801819 + cmp r2, #0x24 @ Applies to lt including R2p4 + bgt skip_errata_801819 @ skip if not affected rev + cmp r2, #0x20 @ Applies to including and above R2p0 + blt skip_errata_801819 @ skip if not affected rev + mrc p15, 0, r0, c0, c0, 6 @ pick up REVIDR reg + and r0, r0, #1 << 3 @ check REVIDR[3] + cmp r0, #1 << 3 + beq skip_errata_801819 @ skip erratum if REVIDR[3] is set + + mrc p15, 0, r0, c1, c0, 1 @ read auxilary control register + orr r0, r0, #3 << 27 @ Disables streaming. All write-allocate + @ lines allocate in the L1 or L2 cache. + orr r0, r0, #3 << 25 @ Disables streaming. All write-allocate + @ lines allocate in the L1 cache. + push {r1-r5} @ Save the cpu info registers + bl v7_arch_cp15_set_acr + pop {r1-r5} @ Restore the cpu info - fall through +skip_errata_801819: +#endif + +#ifdef CONFIG_ARM_ERRATA_454179 + cmp r2, #0x21 @ Only on < r2p1 + bge skip_errata_454179 + + mrc p15, 0, r0, c1, c0, 1 @ Read ACR + orr r0, r0, #(0x3 << 6) @ Set DBSM(BIT7) and IBE(BIT6) bits + push {r1-r5} @ Save the cpu info registers + bl v7_arch_cp15_set_acr + pop {r1-r5} @ Restore the cpu info - fall through + +skip_errata_454179: +#endif + +#ifdef CONFIG_ARM_ERRATA_430973 + cmp r2, #0x21 @ Only on < r2p1 + bge skip_errata_430973 + + mrc p15, 0, r0, c1, c0, 1 @ Read ACR + orr r0, r0, #(0x1 << 6) @ Set IBE bit + push {r1-r5} @ Save the cpu info registers + bl v7_arch_cp15_set_acr + pop {r1-r5} @ Restore the cpu info - fall through + +skip_errata_430973: +#endif + +#ifdef CONFIG_ARM_ERRATA_621766 + cmp r2, #0x21 @ Only on < r2p1 + bge skip_errata_621766 + + mrc p15, 0, r0, c1, c0, 1 @ Read ACR + orr r0, r0, #(0x1 << 5) @ Set L1NEON bit + push {r1-r5} @ Save the cpu info registers + bl v7_arch_cp15_set_acr + pop {r1-r5} @ Restore the cpu info - fall through + +skip_errata_621766: +#endif + + mov pc, r5 @ back to my caller ENDPROC(cpu_init_cp15) #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -357,195 +269,3 @@ ENTRY(cpu_init_crit) b lowlevel_init @ go setup pll,mux,memory ENDPROC(cpu_init_crit) #endif - -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current - @ user stack - stmia sp, {r0 - r12} @ Save user registers (now in - @ svc mode) r0-r12 - ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort - @ stack - ldmia r2, {r2 - r3} @ get values for "aborted" pc - @ and cpsr (into parm regs) - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 - @ (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC @ !! R8 NEEDS to be saved !! - @ a reserved stack spot would - @ be good. - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into - @ cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter - @ in banked mode) - - str lr, [r13] @ save caller lr in position 0 - @ of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of - @ saved stack - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure - @ moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & - @ switch modes. - .endm - - .macro get_bad_stack_swi - sub r13, r13, #4 @ space on current stack for - @ scratch reg. - str r0, [r13] @ save R0's value. - ldr r0, IRQ_STACK_START_IN @ get data regions start - @ spots for abort stack - str lr, [r0] @ save caller lr in position 0 - @ of saved stack - mrs lr, spsr @ get the spsr - str lr, [r0, #4] @ save spsr in position 1 of - @ saved stack - ldr lr, [r0] @ restore lr - ldr r0, [r13] @ restore r0 - add r13, r13, #4 @ pop stack entry - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack_swi - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effective fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif /* CONFIG_USE_IRQ */ -#endif /* CONFIG_SPL_BUILD */