X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=fc367236d2de1fe92fdf8a0875b693812c70ef43;hb=3add68c9966e903a1a4b05acc54e4361ca81eae3;hp=634bc484131991e2538387fbdd4903c1e4dcb9fd;hpb=b39a9ade5ccc8535d66db96a4b46cb09570d7556;p=oweals%2Fu-boot.git diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 634bc48413..fc367236d2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -126,6 +126,53 @@ config ENABLE_ARM_SOC_BOOT0_HOOK ARM_SOC_BOOT0_HOOK which contains the required assembler preprocessor code. +config USE_ARCH_MEMCPY + bool "Use an assembly optimized implementation of memcpy" + default y + depends on !ARM64 + help + Enable the generation of an optimized version of memcpy. + Such implementation may be faster under some conditions + but may increase the binary size. + +config SPL_USE_ARCH_MEMCPY + bool "Use an assembly optimized implementation of memcpy" + default y if USE_ARCH_MEMCPY + depends on !ARM64 + help + Enable the generation of an optimized version of memcpy. + Such implementation may be faster under some conditions + but may increase the binary size. + +config USE_ARCH_MEMSET + bool "Use an assembly optimized implementation of memset" + default y + depends on !ARM64 + help + Enable the generation of an optimized version of memset. + Such implementation may be faster under some conditions + but may increase the binary size. + +config SPL_USE_ARCH_MEMSET + bool "Use an assembly optimized implementation of memset" + default y if USE_ARCH_MEMSET + depends on !ARM64 + help + Enable the generation of an optimized version of memset. + Such implementation may be faster under some conditions + but may increase the binary size. + +config ARCH_OMAP2 + bool + select CPU_V7 + select SUPPORT_SPL + +config ARM64_SUPPORT_AARCH32 + bool "ARM64 system support AArch32 execution state" + default y if ARM64 && !TARGET_THUNDERX_88XX + help + This ARM64 system supports AArch32 execution state. + choice prompt "Target select" default TARGET_HIKEY @@ -137,14 +184,6 @@ config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T -config TARGET_VCMA9 - bool "Support VCMA9" - select CPU_ARM920T - -config TARGET_SMDK2410 - bool "Support smdk2410" - select CPU_ARM920T - config TARGET_ASPENITE bool "Support aspenite" select CPU_ARM926EJS @@ -162,6 +201,8 @@ config ARCH_DAVINCI config KIRKWOOD bool "Marvell Kirkwood" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F + select ARCH_MISC_INIT config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" @@ -185,10 +226,13 @@ config TARGET_WORK_92105 config TARGET_MX25PDK bool "Support mx25pdk" + select BOARD_LATE_INIT select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_ZMX25 bool "Support zmx25" + select BOARD_LATE_INIT select CPU_ARM926EJS config TARGET_APF27 @@ -215,16 +259,19 @@ config TARGET_MX23EVK bool "Support mx23evk" select CPU_ARM926EJS select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_MX28EVK bool "Support mx28evk" select CPU_ARM926EJS select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_MX23_OLINUXINO bool "Support mx23_olinuxino" select CPU_ARM926EJS select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_BG0900 bool "Support bg0900" @@ -248,18 +295,22 @@ config ORION5X config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_SPEAR310 bool "Support spear310" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_SPEAR320 bool "Support spear320" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_SPEAR600 bool "Support spear600" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_STV0991 bool "Support stv0991" @@ -272,21 +323,32 @@ config TARGET_STV0991 config TARGET_X600 bool "Support x600" + select BOARD_LATE_INIT select CPU_ARM926EJS select SUPPORT_SPL config TARGET_IMX31_PHYCORE - bool "Support imx31_phycore" + bool "Support imx31_phycore_eet" select CPU_ARM1136 + select BOARD_EARLY_INIT_F + +config TARGET_IMX31_PHYCORE_EET + bool "Support imx31_phycore_eet" + select BOARD_LATE_INIT + select CPU_ARM1136 + select BOARD_EARLY_INIT_F config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 + select BOARD_EARLY_INIT_F config TARGET_MX31PDK bool "Support mx31pdk" + select BOARD_LATE_INIT select CPU_ARM1136 select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_WOODBURN bool "Support woodburn" @@ -303,6 +365,7 @@ config TARGET_FLEA3 config TARGET_MX35PDK bool "Support mx35pdk" + select BOARD_LATE_INIT select CPU_ARM1136 config ARCH_BCM283X @@ -310,6 +373,7 @@ config ARCH_BCM283X select DM select DM_SERIAL select DM_GPIO + select OF_CONTROL config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" @@ -327,71 +391,69 @@ config TARGET_VEXPRESS_CA9X4 config TARGET_BRXRE1 bool "Support BRXRE1" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT config TARGET_BRPPT1 bool "Support BRPPT1" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT config TARGET_DRACO bool "Support draco" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT select DM select DM_SERIAL select DM_GPIO config TARGET_THUBAN bool "Support thuban" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT select DM select DM_SERIAL select DM_GPIO config TARGET_RASTABAN bool "Support rastaban" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT select DM select DM_SERIAL select DM_GPIO config TARGET_ETAMIN bool "Support etamin" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT select DM select DM_SERIAL select DM_GPIO config TARGET_PXM2 bool "Support pxm2" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT select DM select DM_SERIAL select DM_GPIO config TARGET_RUT bool "Support rut" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 + select BOARD_LATE_INIT select DM select DM_SERIAL select DM_GPIO config TARGET_TI814X_EVM bool "Support ti814x_evm" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 config TARGET_TI816X_EVM bool "Support ti816x_evm" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" @@ -412,6 +474,7 @@ config TARGET_BCMNSP config ARCH_EXYNOS bool "Samsung EXYNOS" select DM + select DM_I2C select DM_SPI_FLASH select DM_SERIAL select DM_SPI @@ -424,6 +487,7 @@ config ARCH_S5PC1XX select DM select DM_SERIAL select DM_GPIO + select DM_I2C config ARCH_HIGHBANK bool "Calxeda Highbank" @@ -450,61 +514,75 @@ config ARCH_MESON config ARCH_MX7 bool "Freescale MX7" select CPU_V7 + select SYS_FSL_HAS_SEC if SECURE_BOOT + select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SEC_LE + select BOARD_EARLY_INIT_F + select ARCH_MISC_INIT config ARCH_MX6 bool "Freescale MX6" select CPU_V7 + select SYS_FSL_HAS_SEC if SECURE_BOOT + select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SEC_LE config ARCH_MX5 bool "Freescale MX5" select CPU_V7 + select BOARD_EARLY_INIT_F config TARGET_M53EVK bool "Support m53evk" select CPU_V7 select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_MX51EVK bool "Support mx51evk" + select BOARD_LATE_INIT select CPU_V7 + select BOARD_EARLY_INIT_F config TARGET_MX53ARD bool "Support mx53ard" select CPU_V7 + select BOARD_EARLY_INIT_F config TARGET_MX53EVK bool "Support mx53evk" + select BOARD_LATE_INIT select CPU_V7 + select BOARD_EARLY_INIT_F config TARGET_MX53LOCO bool "Support mx53loco" + select BOARD_LATE_INIT select CPU_V7 + select BOARD_EARLY_INIT_F config TARGET_MX53SMD bool "Support mx53smd" select CPU_V7 + select BOARD_EARLY_INIT_F config OMAP34XX bool "OMAP34XX SoC" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 select USE_TINY_PRINTF config OMAP44XX bool "OMAP44XX SoC" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 select USE_TINY_PRINTF config OMAP54XX bool "OMAP54XX SoC" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 config AM43XX bool "AM43XX SoC" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 help Support for AM43xx SOC from Texas Instruments. The AM43xx high performance SOC features a Cortex-A9 @@ -514,8 +592,7 @@ config AM43XX config AM33XX bool "AM33XX SoC" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 help Support for AM335x SOC from Texas Instruments. The AM335x high performance SOC features a Cortex-A8 @@ -527,10 +604,12 @@ config ARCH_RMOBILE bool "Renesas ARM SoCs" select DM select DM_SERIAL + select BOARD_EARLY_INIT_F config TARGET_S32V234EVB bool "Support s32v234evb" select ARM64 + select SYS_FSL_ERRATUM_ESDHC111 config ARCH_SNAPDRAGON bool "Qualcomm Snapdragon SoCs" @@ -551,52 +630,74 @@ config ARCH_SOCFPGA select DM select DM_SPI_FLASH select DM_SPI + select ENABLE_ARM_SOC_BOOT0_HOOK + select ARCH_EARLY_INIT_R + select ARCH_MISC_INIT config TARGET_CM_T43 bool "Support cm_t43" - select CPU_V7 - select SUPPORT_SPL + select ARCH_OMAP2 config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" select CMD_GPIO select CMD_MMC if MMC - select CMD_USB + select CMD_USB if DISTRO_DEFAULTS select DM select DM_ETH select DM_GPIO select DM_KEYBOARD select DM_SERIAL - select DM_USB + select DM_USB if DISTRO_DEFAULTS select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE select SPL_STACK_R if SUPPORT_SPL select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL select SYS_NS16550 - select USB - select USB_STORAGE - select USB_KEYBOARD + select USB if DISTRO_DEFAULTS + select USB_STORAGE if DISTRO_DEFAULTS + select USB_KEYBOARD if DISTRO_DEFAULTS select USE_TINY_PRINTF +config TARGET_TS4600 + bool "Support TS4600" + select CPU_ARM926EJS + select SUPPORT_SPL + config TARGET_TS4800 bool "Support TS4800" select CPU_V7 + select SYS_FSL_ERRATUM_ESDHC_A001 config TARGET_VF610TWR bool "Support vf610twr" select CPU_V7 + select SYS_FSL_ERRATUM_ESDHC111 config TARGET_COLIBRI_VF bool "Support Colibri VF50/61" + select BOARD_LATE_INIT select CPU_V7 + select SYS_FSL_ERRATUM_ESDHC111 config TARGET_PCM052 bool "Support pcm-052" select CPU_V7 + select SYS_FSL_ERRATUM_ESDHC111 + select SYS_FSL_ERRATUM_ESDHC135 + select SYS_FSL_ERRATUM_ESDHC_A001 + +config TARGET_BK4R1 + bool "Support BK4r1" + select CPU_V7 + select SYS_FSL_ERRATUM_ESDHC111 + select SYS_FSL_ERRATUM_ESDHC135 + select SYS_FSL_ERRATUM_ESDHC_A001 config ARCH_ZYNQ bool "Xilinx Zynq Platform" + select BOARD_LATE_INIT select CPU_V7 select SUPPORT_SPL select OF_CONTROL @@ -617,6 +718,7 @@ config ARCH_ZYNQ config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 + select BOARD_LATE_INIT select DM select OF_CONTROL select DM_SERIAL @@ -652,8 +754,10 @@ config TARGET_VEXPRESS64_JUNO config TARGET_LS2080A_EMU bool "Support ls2080a_emu" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select ARCH_MISC_INIT help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon @@ -662,8 +766,10 @@ config TARGET_LS2080A_EMU config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select ARCH_MISC_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon @@ -672,9 +778,12 @@ config TARGET_LS2080A_SIMU config TARGET_LS2080AQDS bool "Support ls2080aqds" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select ARCH_MISC_INIT help Support for Freescale LS2080AQDS platform The LS2080A Development System (QDS) is a high-performance @@ -683,9 +792,12 @@ config TARGET_LS2080AQDS config TARGET_LS2080ARDB bool "Support ls2080ardb" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select ARCH_MISC_INIT help Support for Freescale LS2080ARDB platform. The LS2080A Reference design board (RDB) is a high-performance @@ -707,6 +819,7 @@ config TARGET_LS1012AQDS bool "Support ls1012aqds" select ARCH_LS1012A select ARM64 + select BOARD_LATE_INIT help Support for Freescale LS1012AQDS platform. The LS1012A Development System (QDS) is a high-performance @@ -717,6 +830,7 @@ config TARGET_LS1012ARDB bool "Support ls1012ardb" select ARCH_LS1012A select ARM64 + select BOARD_LATE_INIT help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance @@ -735,26 +849,52 @@ config TARGET_LS1012AFRDM config TARGET_LS1021AQDS bool "Support ls1021aqds" + select BOARD_LATE_INIT select CPU_V7 + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP + select SYS_FSL_DDR + select BOARD_EARLY_INIT_F config TARGET_LS1021ATWR bool "Support ls1021atwr" + select BOARD_LATE_INIT select CPU_V7 + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP + select BOARD_EARLY_INIT_F + +config TARGET_LS1021AIOT + bool "Support ls1021aiot" + select BOARD_LATE_INIT + select CPU_V7 + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT + select SUPPORT_SPL + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + help + Support for Freescale LS1021AIOT platform. + The LS1021A Freescale board (IOT) is a high-performance + development platform that supports the QorIQ LS1021A + Layerscape Architecture processor. config TARGET_LS1043AQDS bool "Support ls1043aqds" select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select BOARD_EARLY_INIT_F help Support for Freescale LS1043AQDS platform. @@ -763,7 +903,9 @@ config TARGET_LS1043ARDB select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select BOARD_EARLY_INIT_F help Support for Freescale LS1043ARDB platform. @@ -772,8 +914,10 @@ config TARGET_LS1046AQDS select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI + select BOARD_EARLY_INIT_F help Support for Freescale LS1046AQDS platform. The LS1046A Development System (QDS) is a high-performance @@ -785,8 +929,11 @@ config TARGET_LS1046ARDB select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI + select POWER_MC34VR500 + select BOARD_EARLY_INIT_F help Support for Freescale LS1046ARDB platform. The LS1046A Reference Design Board (RDB) is a high-performance @@ -807,23 +954,23 @@ config TARGET_COLIBRI_PXA270 config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" - select BLK + select BOARD_LATE_INIT select CLK_UNIPHIER select DM select DM_GPIO select DM_I2C select DM_MMC + select DM_RESET select DM_SERIAL select DM_USB select OF_CONTROL select OF_LIBFDT select PINCTRL - select SPL - select SPL_DM - select SPL_LIBCOMMON_SUPPORT - select SPL_LIBGENERIC_SUPPORT - select SPL_OF_CONTROL - select SPL_PINCTRL + select SPL_DM if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL select SUPPORT_SPL help Support for UniPhier SoC family developed by Socionext Inc. @@ -851,6 +998,8 @@ config ARCH_ROCKCHIP select DM_SPI select DM_SPI_FLASH select DM_USB if USB + select DM_PWM + select DM_REGULATOR config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" @@ -858,8 +1007,15 @@ config TARGET_THUNDERX_88XX select OF_CONTROL select SYS_CACHE_SHIFT_7 +config ARCH_ASPEED + bool "Support Aspeed SoCs" + select OF_CONTROL + select DM + endchoice +source "arch/arm/mach-aspeed/Kconfig" + source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" @@ -876,6 +1032,8 @@ source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" +source "arch/arm/mach-litesom/Kconfig" + source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/cpu/armv7/ls102xa/Kconfig" @@ -886,7 +1044,7 @@ source "arch/arm/cpu/armv7/mx6/Kconfig" source "arch/arm/cpu/armv7/mx5/Kconfig" -source "arch/arm/cpu/armv7/omap-common/Kconfig" +source "arch/arm/mach-omap2/Kconfig" source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" @@ -947,6 +1105,7 @@ source "board/freescale/ls2080ardb/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" +source "board/freescale/ls1021aiot/Kconfig" source "board/freescale/ls1046aqds/Kconfig" source "board/freescale/ls1043ardb/Kconfig" source "board/freescale/ls1046ardb/Kconfig" @@ -966,17 +1125,16 @@ source "board/freescale/mx53loco/Kconfig" source "board/freescale/mx53smd/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/freescale/vf610twr/Kconfig" +source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" -source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/phytec/pcm052/Kconfig" source "board/ppcag/bg0900/Kconfig" -source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" source "board/siemens/draco/Kconfig" @@ -1000,6 +1158,7 @@ source "board/ti/ti816x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_vf/Kconfig" +source "board/technologic/ts4600/Kconfig" source "board/technologic/ts4800/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig"